Squid3 - New GUI with sync, normal and reverse proxy

podilarius · Aug 1, 2012, 6:54 PM

Please re-install as I have modified the code using the pgrep a couple of days ago.

dhatz · Aug 1, 2012, 7:18 PM

Please re-install as I have modified the code using the pgrep a couple of days ago.

Hi, I'm not running squid on pfsense, but I just happened to notice the commits at:

https://github.com/bsdperimeter/pfsense-packages/blob/master/config/squid3/proxy_monitor.sh
(which is the latest code afaik)

podilarius · Aug 1, 2012, 9:19 PM

sorry .. looking at the wrong line of code. That package (squid3) is for 1.2.3. The one that is on 2.1 and I think 2.0 is under the directory squid-reverse. So, you are talking about making it:


NUM_PROCS=`pgrep -f "squid -f" | wc -l | awk '{ print $1 }'`

The awk has to be in there to format the number returned properly as output without the awk yields spaces or tabs before the number returned.
or even


NUM_PROCS=`ps auxw | grep -c "[s]quid -f"'

This has only 1 pipe like your example.[/s]

phil.davis · Aug 3, 2012, 4:34 AM

@marcelloc - I corrected the conf_mount_rw and conf_mount_ro calls so that after a squid3 installation on nanobsd-like systems the filesystem ends up read-only. (Previously it was accidentally left read-write at the end of the install).

Now this message appears in /tmp/PHP_errors.log

[03-Aug-2012 04:16:47 UTC] PHP Warning:  copy(/root/2.1-BETA0.captiveportal.inc.backup): failed to open stream: Read-only file system in /usr/local/pkg/squid.inc on line 1640

This is the code:

	if (!file_exists('/root/'.$pfsense_version.'.captiveportal.inc.backup')) {
		copy ($cp_file,'/root/'.$pfsense_version.'.captiveportal.inc.backup');
		}
	if($found_rule > 0){
		file_put_contents($cp_file,$new_cp_inc, LOCK_EX);
		}

I am not sure what you want to do, perhaps put the backup in /tmp? (lost after a reboot on nanobsd), perhaps also only do the backup if a rule is found? Maybe something like this:

	if($found_rule > 0){
		if (!file_exists('/tmp/'.$pfsense_version.'.captiveportal.inc.backup')) {
			copy ($cp_file,'/tmp/'.$pfsense_version.'.captiveportal.inc.backup');
			}

		file_put_contents($cp_file,$new_cp_inc, LOCK_EX);
		}

This code is not in the older squid(2), so this problem is just in squid3.

marcelloc · Aug 4, 2012, 4:31 AM

@phil.davis:

I am not sure what you want to do, perhaps put the backup in /tmp? (lost after a reboot on nanobsd), perhaps also only do the backup if a rule is found? Maybe something like this:

well, it will need a mount_rw before this test and a mount_ro after.

mavnezz · Aug 8, 2012, 9:47 AM

Hi,

i'm using without any probs the squid3 (3.1.20 pkg 2.0.5_3) package on pfsense 2.0.1. thanks for this.

is it possible to use squid on 2 diffent ports on the same ip. for now it's '8080', additionally i want to use '3128'. 8080 should use the wan1 and 3128 should use the wan2 connection. is this in any way possible?

greets

marcelloc · Aug 10, 2012, 10:15 PM

you can try this config on custom options.

find the listening args you need and place there.

athompso · Aug 16, 2012, 7:31 PM

I don't understand what the point is of having XMLRPC sync without being able to listen on a CARP IP address.

can anyone tell me if there is a way to get this pkg to listen on a CARP IP (or even just listen on all interfaces!), and
what is an example use case for synchronized configs otherwise?

(Also see http://redmine.pfsense.org/issues/2591 and http://redmine.pfsense.org/issues/2592.)

Thanks,
-Adam

jimp · Aug 16, 2012, 7:37 PM

Unless the cache and connection state are shared between squid instances, you don't want it binding on a CARP VIP. It makes little sense to have the traffic leave from a shared IP and shared pf states when the actual connections in squid are independent, even if the config is synchronized.

The point of syncing the config is so the slave can take over, and it can, you just can't seamlessly fail over 100% in squid. Even if the states were to sync over it doesn't matter, the squid process itself would have no knowledge of the connection.

marcelloc · Aug 17, 2012, 3:03 AM

@athompso:

can anyone tell me if there is a way to get this pkg to listen on a CARP IP (or even just listen on all interfaces!), and

Listen squid on loopback(lo0) and create nat rules from carp address to 127.0.0.1

2.1 gui framework has the listen all as well listen on virtual ips, so squid3 on pfsense 2.1 will have this option and no need to workaround with nats.

athompso · Aug 18, 2012, 11:49 PM

@jimp:

Unless the cache and connection state are shared between squid instances, you don't want it binding on a CARP VIP. It makes little sense to have the traffic leave from a shared IP and shared pf states when the actual connections in squid are independent, even if the config is synchronized.
The point of syncing the config is so the slave can take over, and it can, you just can't seamlessly fail over 100% in squid. Even if the states were to sync over it doesn't matter, the squid process itself would have no knowledge of the connection.

I don't particularly care about seamless failover, I just want to avoid using PAC. If I have a redundant pair of firewalls, I use the CARP VIP as my default gateway from the inside. The way it's set up right now, I have to point all the clients at one firewall or the other's physical (LAN) IP address. So if that firewall dies, I lose the ability to browse the web without manually reconfiguring each client…? Whereas if squid was bound to the CARP VIP, any in-flight HTTP transactions would fail, but at least I wouldn't have to go around and reconfigure every client. Is there some other mechanism I don't know about?

@marcelloc:

Listen squid on loopback(lo0) and create nat rules from carp address to 127.0.0.1
2.1 gui framework has the listen all as well listen on virtual ips, so squid3 on pfsense 2.1 will have this option and no need to workaround with nats.

That approach hadn't occurred to me - trying it now to see if it works, but I don't expect problems.
However, as to the second point: I am using 2.1-BETA, and I do not see any such option. ("squid3" package, version "beta 3.1.20 pkg 2.0.5_3")

-Adam

jimp · Aug 19, 2012, 6:38 PM

NAT is indeed the easy solution there.

marcelloc · Aug 20, 2012, 4:27 PM

@athompso:

However, as to the second point: I am using 2.1-BETA, and I do not see any such option. ("squid3" package, version "beta 3.1.20 pkg 2.0.5_3")

I said it will, I did not included the code to squid package yet ;)

hisoka01 · Aug 30, 2012, 4:33 PM

Hi, my squid cannot start :'(, here is the message in cache.log:


2012/08/28 23:09:44| Accepting  HTTP connections at [::]:3128, FD 29.
2012/08/28 23:09:44| HTCP Disabled.
2012/08/28 23:09:44| Ready to serve requests.
2012/08/28 23:09:44| WARNING: ssl_crtd #1 (FD 19) exited
2012/08/28 23:09:44| WARNING: ssl_crtd #2 (FD 21) exited
2012/08/28 23:09:44| WARNING: ssl_crtd #3 (FD 23) exited
(ssl_crtd): Uninitialized SSL certificate database directory: /var/squid/lib/ssl_db. To initialize, r
un "ssl_crtd -c -s /var/squid/lib/ssl_db".
2012/08/28 23:09:44| WARNING: ssl_crtd #4 (FD 25) exited
2012/08/28 23:09:44| Too few ssl_crtd processes are running
2012/08/28 23:09:44| storeDirWriteCleanLogs: Starting...
2012/08/28 23:09:44|   Finished.  Wrote 0 entries.
2012/08/28 23:09:44|   Took 0.00 seconds (  0.00 entries/sec).
FATAL: The ssl_crtd helpers are crashing too rapidly, need help!

Squid Cache (Version 3.1.20): Terminated abnormally.
CPU Usage: 0.092 seconds = 0.061 user + 0.031 sys
Maximum Resident Size: 10532 KB
Page faults with physical i/o: 0
(ssl_crtd): Uninitialized SSL certificate database directory: /var/squid/lib/ssl_db. To initialize, r
un "ssl_crtd -c -s /var/squid/lib/ssl_db".

I have tried both squid 2 & 3, both got the same message ::)
Also it seems there is no "ssl_crtd" exist in my system…so I cannot try to run the command :o
Do you have any suggestion..? :'(

Thanks

marcelloc · Sep 5, 2012, 3:06 PM

I have this dir on my squid3 install.

What are you trying to configure?

ls -la /var/squid/lib/
total 6
drwxr-xr-x  3 proxy  proxy  512 Apr 14 02:17 .
drwxrwxr-x  7 proxy  proxy  512 Apr 14 02:17 ..
drwxr-xr-x  2 proxy  proxy  512 Apr 14 02:17 ssl_db

Hobby-Student · Sep 21, 2012, 3:49 PM

Hey guys,

I have a strange problem regarding reverse proxy and authentification with Certificates… The package itself is working as expected and without certs needed to authenticate I can open all services (owa, msas, rpc).

Now here it comes: (all IP's, ports and url's are renamed for security reasons ;) )

if i use this line in my squid.conf:

https_port xxx.xxx.xxx.xxx:Port cert=/website.crt key=/website.key defaultsite=this.website.me vhost

everything works as expected. I get my login page… but if I use this one:

https_port xxx.xxx.xxx.xxx:Port cert=/website.crt key=/website.key defaultsite=this.website.me clientca=/CA.crt cafile=/CA.crt capath=/ sslcontext=id vhost

I get asked for my client cert and then "page cannot be found" with this in squid logs:

clientNegotiateSSL: Error negotiating SSL connection on FD 17: error:0D0C50A1:asn1 encoding routines:ASN1_item_verify:unknown message digest algorithm (1/-1)

My CA is created with SHA512… So the clients are too ;)
When I do

openssl list-message-digest-commands

on my pfsense shell, I get

md2
md4
md5
mdc2
rmd160
sha
sha1

But with openssl speed, sha512 is listed!

What I found so far is, that somewhere in the squid source this line should be added

OpenSSL_add_all_algorithms()

somwhere like

src/ssl_support.*
function: ssl_initialize(void)

Due to the lack of time, I wasn't able to get deeper inside… Does someone has an idea?!

@marcelloc:
If this needs to be posted somewhere else, please let mo know. If I understand this package right, you are compiling squid on your own?! So this could be solved easily...

Kind regards

EDIT:
found it in src/ssl_support.cc, line 593

SSL_load_error_strings();
SSLeay_add_ssl_algorithms();

what i found by google, there should also be called: OpenSSL_add_all_algorithms()

@marcelloc:
possible?

marcelloc · Sep 21, 2012, 10:35 PM

@Hobby-Student:

@marcelloc:
If this needs to be posted somewhere else, please let mo know. If I understand this package right, you are compiling squid on your own?! So this could be solved easily…

No more :(

Packages now must be only compiled and provided by official repo, you can compile it on 8.1 freebsd, create the package and then install on your system.

Core team are really busy these days. I'm waiting some packages to be recompiled too. After this, I can continue package development and testing.

these are current squid3 compile options available on ports

SQUID_KERB_AUTH Install Kerberos authentication helper

SQUID_LDAP_AUTH Install LDAP authentication helpers

SQUID_NIS_AUTH Install NIS/YP authentication helpers

SQUID_SASL_AUTH Install SASL authentication helpers

SQUID_IPV6 Enable IPv6 support

SQUID_DELAY_POOLS Enable delay pools

SQUID_SNMP Enable SNMP support

SQUID_SSL Enable SSL support for reverse proxies

SQUID_SSL_CRTD Enable SSL certificate daemon

SQUID_PINGER Install the icmp helper

SQUID_DNS_HELPER Use the old 'dnsserver' helper

SQUID_HTCP Enable HTCP support

SQUID_VIA_DB Enable forward/via database

SQUID_CACHE_DIGESTS Enable cache digests

SQUID_WCCP Enable Web Cache Coordination Prot. v1

SQUID_WCCPV2 Enable Web Cache Coordination Prot. v2

SQUID_STRICT_HTTP Be strictly HTTP compliant

SQUID_IDENT Enable ident (RFC 931) lookups

SQUID_REFERER_LOG Enable Referer-header logging

SQUID_USERAGENT_LOG Enable User-Agent-header logging

SQUID_ARP_ACL Enable ACLs based on ethernet address

SQUID_IPFW Enable transparent proxying with IPFW

SQUID_PF Enable transparent proxying with PF

SQUID_IPFILTER Enable transp. proxying with IPFilter

SQUID_FOLLOW_XFF Follow X-Forwarded-For headers

SQUID_ECAP En. loadable content adaptation modules

SQUID_ICAP Enable ICAP client functionality

SQUID_ESI Enable ESI support (experimental)

SQUID_AUFS Enable the aufs storage scheme

SQUID_COSS Enable COSS (currently not available)

SQUID_KQUEUE Use kqueue(2) (experimental)

SQUID_LARGEFILE Support log and cache files >2GB

SQUID_STACKTRACES Create backtraces on fatal errors

SQUID_DEBUG Enable debugging options

Hobby-Student · Sep 22, 2012, 11:52 AM

@marcelloc:

Packages now must be only compiled and provided by official repo, you can compile it on 8.1 freebsd, create the package and then install on your system.

Core team are really busy these days. I'm waiting some packages to be recompiled too. After this, I can continue package development and testing.

these are current squid3 compile options available on ports

So if I would have a FreeBSD 8.1, download squid sources and build it with all the options marked in your post, we could run the binaries on pfsense?

EDIT:
could I use squid 3.2.1 source? or won't this one run on pfsense?

EDIT #2:
downloading freebsd 8.1 i386. will try to get things work.

@marcelloc:
please let me know, which version of squid I should compile. 3.1.19, 3.1.20 or 3.2.1?

marcelloc · Sep 23, 2012, 4:27 AM

The best way is to use freebsd ports to compile.

Portsnap fetch
Portsnap extract

CD /usr/ports/www/squid31
make package

Hobby-Student · Sep 23, 2012, 12:09 PM

why don't we use version 3.2.1?