Squid3 - New GUI with sync, normal and reverse proxy

yosu · Jun 7, 2012, 2:06 PM

@nutt318:

Make URI textbox blank in order to get:

acl test1 url_regex -i http://test1.mydomain.com.*$

Now you get:

acl test1 url_regex -i test1.mydomain.com/http://test1.mydomain.com.*$

You can look at /usr/local/etc/squid/squid.conf in a ssh shell.

Best regards.

nutt318 · Jun 7, 2012, 2:19 PM

That made it work from internal on the LAN, but I still cant get to it from the outside.

Any other ideas?

Thanks!

cjbujold · Jun 9, 2012, 6:49 PM

Unable to get reverse squid 3 to work. Here is my configuration, if somebody can help. The example i'm trying to get to work is 2 web servers; one on port 80 and another on port 8081. The request comes to port 80 should be pickedup by squid and depending on the URL squid should send the request either to port 80 of the web server or to port 8081. The test Im using is www goes to port 80 and helpdesk goes to port 8081. When I try it, everythings goes to port 80. Port 8081 is never sent aqnything and the helpdesk goes to port 80.

The squid.conf file reverse proxy section looks like this: (XXX is equal to mydomainname)

Reverse Proxy settings

http_port 192.168.XXX.XXX:80 accel defaultsite=XXXX.ca vhost
http_port 156.34.XXX.XXX:80 accel defaultsite=XXXX.ca vhost
#XXXX HelpDesk
cache_peer 192.168.XXX.15 parent 8081 0 proxy-only no-query originserver login=PASS name=XXXXHelpDesk

acl XXXXHelpDesk url_regex -i http://helpdesk.XXXX.ca/.$
acl XXXXHelpDesk url_regex -i http://helpdesk.XXXX.com/.$
cache_peer_access XXXXHelpDesk allow XXXXXHelpDesk
cache_peer_access XXXXHelpDesk allow XXXXHelpDesk
cache_peer_access XXXXHelpDesk deny allsrc
cache_peer_access XXXXHelpDesk deny allsrc
never_direct allow XXXXHelpDesk
never_direct allow XXXXHelpDesk
http_access allow XXXXHelpDesk
http_access allow XXXXHelpDesk

deny_info TCP_RESET allsrc

Custom options

![MappingDetail PM.png](/public/imported_attachments/1/MappingDetail PM.png)
![MappingDetail PM.png_thumb](/public/imported_attachments/1/MappingDetail PM.png_thumb)

nutt318 · Jun 11, 2012, 1:50 PM

Sounds like the same issue I'm having, however it looks like one of your mappings isnt ON. Maybe that will fix it, if so I need to look over my config again.

nutt318 · Jun 12, 2012, 9:16 PM

I looked at my squid.config file at its basically the same as cjbujold's.

Is there anything else to try, or does anyone have any idea why this isnt working?

Thanks for the help.

IGIdeus · Jun 13, 2012, 10:11 AM

Hi,

There is no possible to restart/start squid service from dashboard and services GUI pages.

Best regards
IGIdeus

IGIdeus · Jun 13, 2012, 10:31 AM

Hi,

IMHO squid as a package for firewall should be hardened a little bit more.
From my perspective ACL safe_ports should include only 21, 80, 443 and 1025-65535 ports, ACL SSL should include only 443 port. All other ports should be added manually.
There could be information about other ports in description of the options.

The brilliant function could be possibility to manage the ACLs like in Webmin or like firewall rules in pfSense.

Best regards
IGIdeus

marcelloc · Jun 13, 2012, 7:15 PM

@IGIdeus:

There is no possible to restart/start squid service from dashboard and services GUI pages.

Apply this patch on your 2.0.1 install to fix restart service option
https://github.com/bsdperimeter/pfsense/commit/6ae78f0808747893f30b867c51b744dfe39e2190

@IGIdeus:

From my perspective ACL safe_ports should include only 21, 80, 443 and 1025-65535 ports, ACL SSL should include only 443 port. All other ports should be added manually.

the current list (21 70 80 210 280 443 488 563 591 631 777 901 1025-65535) is not that big. I think(and in some cases I remove) that 1025-65535 is the most "unsecure" port range on this array. You can chage it editing squid.inc file.

@IGIdeus:

The brilliant function could be possibility to manage the ACLs like in Webmin or like firewall rules in pfSense.

It's on the todo list, but I need some free time to finish.

nutt318 · Jun 13, 2012, 7:13 PM

@marcelloc:

The setup looks fine, I'll try to simulate it.

Did you ever have a chance to simulate the reverse proxy traffic?

blasterreal · Jun 16, 2012, 7:14 AM

Pfsense 2.0.1 32 BIT

Squid services not started :(

-php: /pkg_edit.php: The command '/usr/local/sbin/squid -k shutdown' returned exit code '1', the output was 'FATAL: Bungled squid.conf line 4: http_port 127.0.0.1:3128 intercept Squid Cache (Version 2.7.STABLE9): Terminated abnormally.'

-squid[54825]: Bungled squid.conf line 4: http_port 127.0.0.1:3128 intercept

marcelloc · Jun 16, 2012, 9:43 PM

@Blasterreal:

Squid Cache (Version 2.7.STABLE9)

Did you installed squidguard after squid? force a squid3 reinstall, check config, apply settings and test again.

blasterreal · Jun 18, 2012, 9:40 AM

Thanks its working ;)

m4st3rc1p0 · Jun 18, 2012, 10:31 AM

Hi,

Is there a way that we can enable LDAP and NT authentication properly on this module, I was not able to run this using LDAP or NT.

** PLease advise

TIA

Cino · Jun 18, 2012, 10:56 AM

any news on pbi package? I did a new install of 2.1 and can't install the package.. I may follow these step to manually install; http://forum.pfsense.org/index.php/topic,50572.0.html

Nachtfalke · Jun 18, 2012, 1:48 PM

http://lists.pfsense.org/pipermail/dev/2012-June/000178.html

Cino · Jun 18, 2012, 6:13 PM

@Nachtfalke:

http://lists.pfsense.org/pipermail/dev/2012-June/000178.html

thanks. Guess I should had read the whole thing… I missed the bottom part

EDIT: Squid 3 has been built it looks, http://files.pfsense.com/packages/8/All/squid-3.1.19-i386.pbi

EDIT2: Since the package showed up, I installed it... Looks like it needs some options added to it when the pbi is being built:


2012/06/18 13:19:24| cache_cf.cc(381) parseOneConfigFile: squid.conf:17 unrecognized: 'sslcrtd_children'
2012/06/18 13:19:24| WARNING: (B) '127.0.0.1' is a subnetwork of (A) '127.0.0.1'
2012/06/18 13:19:24| WARNING: because of this '127.0.0.1' is ignored to keep splay tree searching predictable
2012/06/18 13:19:24| WARNING: You should probably remove '127.0.0.1' from the ACL named 'ext_manager'
2012/06/18 13:19:24| WARNING: (B) '127.0.0.1' is a subnetwork of (A) '127.0.0.1'
2012/06/18 13:19:24| WARNING: because of this '127.0.0.1' is ignored to keep splay tree searching predictable
2012/06/18 13:19:24| WARNING: You should probably remove '127.0.0.1' from the ACL named 'ext_manager'
2012/06/18 13:19:24| cache_cf.cc(381) parseOneConfigFile: squid.conf:73 unrecognized: 'delay_pools'
2012/06/18 13:19:24| cache_cf.cc(381) parseOneConfigFile: squid.conf:74 unrecognized: 'delay_class'
2012/06/18 13:19:24| cache_cf.cc(381) parseOneConfigFile: squid.conf:75 unrecognized: 'delay_parameters'
2012/06/18 13:19:24| cache_cf.cc(381) parseOneConfigFile: squid.conf:76 unrecognized: 'delay_initial_bucket_level'
2012/06/18 13:19:24| cache_cf.cc(381) parseOneConfigFile: squid.conf:77 unrecognized: 'delay_access'


 2012/06/18 13:24:54| cache_cf.cc(381) parseOneConfigFile: squid-reverse.conf:11 unrecognized: 'netdb_filename'
2012/06/18 13:24:54| cache_cf.cc(381) parseOneConfigFile: squid-reverse.conf:16 unrecognized: 'sslcrtd_children'

It wont start, I manually was able to start squid by taking the unrecognized commands out.. hand edit the squid.inc file so they aren't added

EDIT3: Still testing but looks like option -f will be needed to keep the config files in the same location:

-f file Use given config-file instead of
/usr/pbi/squid-i386/etc/squid/squid.conf

jimp · Jun 18, 2012, 6:38 PM

What build_options were used when making the custom package? I can add whatever is needed to get it building. I tried adding ECAP and that just blew up the build.

If it isn't known, just get /var/db/ports/squid/options from the box that built the current .tbz and post it and I can translate it into the syntax we need.

And yes all packages with config files should be using whatever parameter is there like -f to manually specify where you want the config (should really be /var/etc/something, not /usr/local/etc/something)

Cino · Jun 18, 2012, 6:45 PM

thanks Jim, I'll let Marcelloc charm in on the dev stuff ;-)

marcelloc · Jun 18, 2012, 7:00 PM

Hi jimp,

these are the options on /var/db/ports/squid31/options

# This file is auto-generated by 'make config'.
# No user-servicable parts inside!
# Options for squid-3.1.19
_OPTIONS_READ=squid-3.1.19
WITH_SQUID_KERB_AUTH=true
WITH_SQUID_LDAP_AUTH=true
WITH_SQUID_NIS_AUTH=true
WITH_SQUID_SASL_AUTH=true
WITH_SQUID_IPV6=true
WITH_SQUID_DELAY_POOLS=true
WITH_SQUID_SNMP=true
WITH_SQUID_SSL=true
WITH_SQUID_SSL_CRTD=true
WITH_SQUID_PINGER=true
WITHOUT_SQUID_DNS_HELPER=true
WITH_SQUID_HTCP=true
WITH_SQUID_VIA_DB=true
WITH_SQUID_CACHE_DIGESTS=true
WITHOUT_SQUID_WCCP=true
WITH_SQUID_WCCPV2=true
WITHOUT_SQUID_STRICT_HTTP=true
WITH_SQUID_IDENT=true
WITH_SQUID_REFERER_LOG=true
WITH_SQUID_USERAGENT_LOG=true
WITH_SQUID_ARP_ACL=true
WITH_SQUID_IPFW=true
WITH_SQUID_PF=true
WITHOUT_SQUID_IPFILTER=true
WITH_SQUID_FOLLOW_XFF=true
WITHOUT_SQUID_ECAP=true
WITHOUT_SQUID_ICAP=true
WITHOUT_SQUID_ESI=true
WITH_SQUID_AUFS=true
WITHOUT_SQUID_COSS=true
WITHOUT_SQUID_KQUEUE=true
WITH_SQUID_LARGEFILE=true
WITHOUT_SQUID_STACKTRACES=true
WITHOUT_SQUID_DEBUG=true

jimp · Jun 18, 2012, 7:08 PM

sure your ports tree is up-to-date? (portsnap fetch extract, then go to that port and do 'make config' again) They changed the format of that file recently.

We need the format you posted this time, but I just wanted to make sure you had all of the possible config variables set.

EDIT: Looks like they were all set. I updated the pkg xml, as soon as the builders are done with their current jobs I'll try new builds.