Need Help with OpenVPN Site to Site PKI 2.0.1

[tweezy619]

I have setup a site to site pki and got pretty much everything working. server side is up and client side is up.

Tunnel: 10.0.8.0/24
Server: 192.168.1.0/24
Client: 192.168.202.0/24

I followed these instructions to a T but i can't ping either side… what am i missing?
http://forum.pfsense.org/index.php?topic=48667.0

[heper]

did you create firewall rules to allow stuff to pass ?

[tweezy619]

i sure did… opened 1194 udp on the wan port of the server and allowed all traffic on the openvpn rule for both sides.

[heper]

can you ping the tunnel endpoints (most likely 10.0.8.1 - 10.0.8.2) from the pfsense webinterface ? If not and your firewall rules are good then the tunnel is probably not working correctly.
If yes, try checking if the openvpn routes for the local lan and client lan are ok. (see remote network / local network in openvpn configuration page)

If it then still doesn't work you should provide some more details like screenshots of configuration/routing tables/traceroutes/…

kind regards