Setting best of for mini PCI atheros CM9

  • Hi, I have got  question  ,  what  is  your  best of setting for atheros CM9 if you  use wifi  at 802.11g ?
    Thanks all

    settings  etc.

  • You have to (at least) set diversity=0 and txantenna and rxantenna to 1 or 2 (depends on which connector you have attached the pigtail).
    For the others settings i thing the following are well.


    If you have a long range point to point link (switch to 802.11b or 802.11a then) the most important values are acktimeout, ctstimeout and slottime. They depend on the distance between the two points.

  • Hi, I dont know where is problem,so I have got In/out errors 2959246/5 still.I use antena 1 and  version 1.2-RC2
    built on Mon Aug 20 12:41:04 EDT 2007.Please help  Ladislav

    WLAN_1 interface (ath0)
    Status associated
    DHCP down   
    MAC address 00:0b:6b:4e:40:b5
    Media autoselect mode 11g <hostap>Channel 4
    SSID LadaWerneman3
    In/out packets 69974/101949 (10.00 MB/114.36 MB)
    In/out errors 3206006/5
    Collisions 0
    Bridge (bridge0) learning

    There is my config .xml-

    <shellcmd>sysctl dev.ath.0.rxantenna=1;sysctl dev.ath.0.txantenna=1;sysctl dev.ath.0.diversity=0</shellcmd>
    <afterfilterchangeshellcmd>sysctl dev.ath.0.rxantenna=1; sysctl dev.ath.0.txantenna=1;sysctl dev.ath.0.diversity=0</afterfilterchangeshellcmd>

    view from  shell-cmd  sysctl dev.ath.0

    dev.ath.0.%parent: pci1
    dev.ath.0.smoothing_rate: 95
    dev.ath.0.sample_rate: 10
    dev.ath.0.countrycode: 0
    dev.ath.0.regdomain: 0
    dev.ath.0.slottime: 9
    dev.ath.0.acktimeout: 75
    dev.ath.0.ctstimeout: 75
    dev.ath.0.softled: 0
    dev.ath.0.ledpin: 0
    dev.ath.0.ledon: 0
    dev.ath.0.ledidle: 2700
    dev.ath.0.txantenna: 1
    dev.ath.0.rxantenna: 1
    dev.ath.0.diversity: 0
    dev.ath.0.txintrperiod: 5
    dev.ath.0.diag: 0
    dev.ath.0.tpscale: 1
    dev.ath.0.tpc: 0
    dev.ath.0.tpack: 63
    dev.ath.0.tpcts: 0
    dev.ath.0.rfsilent: 1
    dev.ath.0.rfkill: 0
    dev.ath.0.monpass: 24</hostap>