Install squidguard

mantunespb · Jul 18, 2007, 12:22 PM

I installed squidGuard again how much to this no problem, to put the same still presents some errors as for example:

In border LOG nao this reading the squidguard.log archive due to the error, I find that it is because of the way of log, is /var/squidGuard/log/squidGuard.log and the correct one is /var/log/squidGuard.log
squigGuard to append of this asset nao this making the blockade of the pages follows below log generated and the configuration archive

squidGuard.log

2007-07-18 09:25:43 [9074] going into emergency mode
2007-07-18 09:25:43 [9074] ending emergency mode, stdin empty
2007-07-18 09:25:43 [9076] syntax error in configfile /usr/local/etc/squidGuard/squidGuard.conf line 26
2007-07-18 09:25:43 [9076] going into emergency mode
2007-07-18 09:25:43 [9076] ending emergency mode, stdin empty
2007-07-18 09:25:49 [9095] syntax error in configfile /usr/local/etc/squidGuard/squidGuard.conf line 26
2007-07-18 09:25:49 [9095] going into emergency mode
2007-07-18 09:25:49 [9095] ending emergency mode, stdin empty
2007-07-18 09:25:49 [9097] syntax error in configfile /usr/local/etc/squidGuard/squidGuard.conf line 26
2007-07-18 09:25:49 [9097] going into emergency mode
2007-07-18 09:25:49 [9097] ending emergency mode, stdin empty

squidGuard.conf

============================================================

SquidGuard configuration file

This file generated automaticly with SquidGuard configurator

(C)2006 Serg Dvoriancev

email: dv_serg@mail.ru

============================================================

logdir /var/squidGuard/log
dbhome /var/db/squidGuard

Horario de Bloqueio

time Horario {
weekly * 00:00-24:00
}

Rede Block

src dnpmse {
ip 10.30.180.0/24
log block.log
}

dest localhost { # fix localhost access problem on transparent proxy
ip 127.0.0.1
}

Bloqueios de sites

dest Bloqueios {
domainlist Bloqueios/domains
expressionlist Bloqueios/expressions
redirect http://127.0.0.1/sgerror.php?url=http://www.terra.com.br
log block.log
}

acl {
dnpmse within Horario {
pass localhost !Bloqueios none
redirect ?url=http://www.terra.gov.br
} else {
pass localhost !Bloqueios none
redirect http://127.0.0.1/sgerror.php?url=http://www.terra.gov.br
}

default within Horario {
pass localhost !Bloqueios none
redirect http://127.0.0.1/sgerror.php?url=http://www.terra.com.br
} else {
pass localhost !Bloqueios none
redirect http://127.0.0.1/sgerror.php?url=http://www.terra.com.br
}
}

================

Line 26 is exactly this part

dest localhost { # fix localhost access problem on transparent proxy
–--> ip 127.0.0.1
}

thanks

dvserg · Jul 18, 2007, 4:06 PM

Near time fix this. Sorry, i have examination.

srs · Jul 18, 2007, 4:22 PM

@dvserg:

This may be if you have wrong pkg_config.xml content. For example you open file pkg_config.xml on browser and paste-copy them to Alt_PKG window. In this situatin content have + and - symbols before XML nodes (xml tree viewing in browser).
Need download pkg_config.xml as file for valid content structure.

I dont know dvserg; what I'm doing now is using ssh to the server, then downloading pkg_config.xml with wget direct from your site; it means that I do not edit or even open the file…

thanks

dvserg · Jul 18, 2007, 5:03 PM

@srs:

@dvserg:

This may be if you have wrong pkg_config.xml content. For example you open file pkg_config.xml on browser and paste-copy them to Alt_PKG window. In this situatin content have + and - symbols before XML nodes (xml tree viewing in browser).
Need download pkg_config.xml as file for valid content structure.

I dont know dvserg; what I'm doing now is using ssh to the server, then downloading pkg_config.xml with wget direct from your site; it means that I do not edit or even open the file…

thanks

You must download pkg_config.xml as file and you can edit or open DownloadeD file in text editor(notepad for example). If you open file in browser - him adding - and + symbols, what if copy this from browser give error xml structure/

srs · Jul 19, 2007, 4:07 PM

this is exactally what I am doing; I download the xml file or using "save as" or using wget, in dos prompt; in both methods, file isn't opened and no aditional symbols are inserted into xml file; then I open the file using notepad, that I know is a "pure text" editor; then I paste into pfsense and still doesnt work :(

sorry for this :-[

mantunespb · Jul 19, 2007, 5:48 PM

Friend, on the problem of squigGuard this configuring and this making the blockade and the error in squidGuard.conf vc does not have some solution?

thanks

dvserg · Jul 19, 2007, 6:07 PM

@mantunespb:

Friend, on the problem of squigGuard this configuring and this making the blockade and the error in squidGuard.conf vc does not have some solution?

thanks

Try instal now. I update sources.

BennyS · Jul 20, 2007, 8:12 AM

hi srs,

I hv same problem, but after i 'TURN OFF TRANSPARAN PROXY' it work!!!

B.

dvserg · Jul 20, 2007, 8:33 AM

@BennyS:

hi srs,

I hv same problem, but after i 'TURN OFF TRANSPARAN PROXY' it work!!!

B.

SG incorrect worked with transparent proxy. I try to solve this problem.
Temporary decision - change 127.0.0.1 on sg config to you pfsense ip and restart squid
with 'squid -k reconfigure' from command prompt

mantunespb · Jul 20, 2007, 3:14 PM

I am not obtaining to install squidguard one more time. it is possible to install manually? vc it can explain me as to lower the packages and to install manually? below the error.

Downloading package configuration file… done.
Saving updated package information... done.
Downloading squidGuard and its dependencies... done.
Checking for successful package installation...

pkg_mgr_squidguard.log

Beginning package installation.
Downloading package configuration file...
squidGuard-1.2.0_1 Array
(
[0] => tar: Error opening archive: Empty input file: Inappropriate file type or format
[1] => pkg_add: tar extract of /tmp/apkg_squidGuard-1.2.0_1.tbz failed!
[2] => pkg_add: unable to extract table of contents file from '/tmp/apkg_squidGuard-1.2.0_1.tbz' - not a package?
[3] => pkg_add: 1 package addition(s) failed
)

Package WAS NOT installed properly.

srs · Jul 24, 2007, 4:21 PM

@BennyS:

hi srs,

I hv same problem, but after i 'TURN OFF TRANSPARAN PROXY' it work!!!

B.

Thanks Benny, I disabled Transparent Proxy and got to install SG package! it worked to me!

now try to use SG :D

mantunespb · Jul 24, 2007, 6:16 PM

I installed squidguard again apos to verify that mine firewall this blocking in the hour of the installation. the Installation occurs without no problem. The error of reading of log through button GET LOG is solved, however the filter of content of squiddguard only functions when the Squid this in transparent way? exists some configuration it to function?

unforeseen · Dec 4, 2007, 1:41 PM

@dvserg:

1. need install this http://diskatel.narod.ru/pfSense/alt_pkg.htm
(topic http://forum.pfsense.org/index.php/topic,4811.msg29311.html#msg29311)

2. download http://diskatel.narod.ru/pfSense/packages/pkg_config.xml as file
(! it is important !, in browser this file open with +/- symbols, what give error when you copy this content to pfSense)
and put content this file to Alt package manager

3. See System/Packages menu with squidGuard package list and install him.

psЖ about p.2 -

I'm not sure if the above steps are still needed but in regard to step 2, I recall someone posting that they used wget to download the file and it still didn't work. When I used: wget http://diskatel.narod.ru/pfSense/packages/pkg_config.xml I noticed that if I opened the file in vi it had a bunch of ^M

A simple fix is to:

wget http://diskatel.narod.ru/pfSense/packages/pkg_config.xml

vi pkg_config.xml

Then run search and replace in vi type:

:%s/^V^M//g

-OR-

if you fix it on the site, people can be sure they download the correct file :) Of course, like I said, this may not even be needed now (or hopefully soon as it maybe all in the squidgaurd package)

dvserg · Dec 4, 2007, 2:39 PM

Uninstall full and install from normal package list (pfsense.com server).