OpenVPN TAP/Bridged with Win7\. All connects but not routing

firewalluser

2.0.2-RELEASE (i386)
built on Fri Dec 7 16:30:38 EST 2012
FreeBSD 8.1-RELEASE-p13

Static IP
Router setup with a DMZ to pfsense WAN IP.

pfsense Interfaces
Wan Interface (DHCP fixed)
Lan Interface static with DHCP server service on.
OPT1 interface which is the OpenVPN Server
Lan & OPT1 are bridged.

I've followed these instructions http://hardforum.com/showthread.php?t=1663797 and have the Win7 machine connecting to the openVPN, it gets a Lan IP address which is the start IP address in the Server Bridge DHCP Start field.

I dont seem to be able to ping or access anything on the network. I have toggled the checkbox Inter-client communication (Allow communication between clients connected to this server) but neither option seems to work.

Any suggestions?

OpenVPN:Server
General Information
Server Mode: Remote Access SSL/TLS
Protocol: UDP
Interface: WAN
Local Port: 1194

Cryptographic Settings
Certs are all ok.

Tunnel Settings
Tunnel Network: <blank>Bridge DHCP: Ticked
Bridge Interface: LAN
Server Bridge DHCP Start: A Lan IP Address
Server Bridge DHCP Start (should read End): A Lan IP Address + 5
Redirect Gateway: Ticked
Concurrent Connections: 4
Compression: Ticked
Type of Service: Unticked
Inter-Client Communication: Ticked
Duplicate Connections: Unticked.

Client Settings
Dynamic IP: Ticked
Address Pool: Unticked
DNS Default Domain: Ticked
Domain Field : mydomain.local

DNS Servers: Ticked
DNS Server 1: LAN IP Address

NTP Servers: Unticked
NetBios Options: Unticked (have toggled this, and set Node Type to None, b-node, m-mode & h-mode but no joy).

Advanced Configuration
Advanced: <blank>Interfaces:
WAN: DHCP
LAN: Static
OPT1: None

Interface Assignments
WAN: Nic1
LAN: Nic2
OPT1: OpenVPN Server

Bridges
Bridge0 (Members LAN, OPT1)

Rules
OpenVPN (created by OpenVPN wizard)
1 rule (any proto, source and destination)

WAN Interface
1 rule (UDP, any source, destination WAN, Dest. Port 1194, any gateway)

OPT1 Interface
1 rule (any proto, source and destination)

Any suggestions why this doesnt seem to be working? I've read in some places there are problems with bridging in openVPN on pfsense 2.0.2-RELEASE (i386), am I hitting one of these pfsense problems?

TIA.</blank></blank>

firewalluser

I have TUN working so will stick with this for now and will revisit when pfsense 2.1 is released.