PfSense 2.02 OpenVPN TAP: Client can't see LAN and vice-versa

pfSenseRocks

I installed pfSense for the first time two days ago and installed the TAP fix and the client exporter packages and generally have everything working well. I have set up OpenVPN using the wizard and modified it to bridge mode (TAP). Clients can successfully connect but can't see any computers on the network and vice-versa. I read through the wiki, couple of tutorials and perused through the forum and tinkered around to get it working but I ended up doing more harm than good. I have attached screen shots of my setting. I think I need help with properly configuring the firewall rules, NAT, etc. Can someone help out? Much appreciated.

Please let me know what additional information I can provide to help with this issue. Thanks!

PS: Did I say I was a noob?

Packages.PNG_thumb

OpenVPN-Client.PNG_thumb

OpenVPN-Tunnel.PNG_thumb

OpenVPN-General.PNG_thumb

Firewall-WAN.PNG_thumb

FireWall-OpenVPN.PNG_thumb

pfSenseRocks

Adding contents of server1.conf

dev ovpns1
dev-type tap
dev-node /dev/tap1
writepid /var/run/openvpn_server1.pid
#user nobody
#group nobody
script-security 3
daemon
keepalive 10 60
ping-timer-rem
persist-tun
persist-key
proto udp
cipher AES-128-CBC
up /usr/local/sbin/ovpn-linkup
down /usr/local/sbin/ovpn-linkdown
local xxx.yyy.zzz.129
engine cryptodev
tls-server
server-bridge 192.168.24.1 255.255.255.0 192.168.24.200 192.168.24.204
auth-user-pass-verify /var/etc/openvpn/server1.php via-env
tls-verify /var/etc/openvpn/server1.tls-verify.php
lport 3001
management /var/etc/openvpn/server1.sock unix
max-clients 3
push "route 192.168.24.0 255.255.255.0"
push "dhcp-option DOMAIN mulye.com"
push "dhcp-option DNS 192.168.24.1"
client-to-client
ca /var/etc/openvpn/server1.ca 
cert /var/etc/openvpn/server1.cert 
key /var/etc/openvpn/server1.key 
dh /etc/dh-parameters.1024
tls-auth /var/etc/openvpn/server1.tls-auth 0
comp-lzo
persist-remote-ip
float

And Client.OVPN

dev tap
persist-tun
persist-key
cipher AES-128-CBC
tls-client
client
resolv-retry infinite
remote pii.dnsalias.com 3001 udp
tls-remote "PII_SERVER_CERT"
auth-user-pass
pkcs12 gw-udp-3001.p12
tls-auth gw-udp-3001tls.key 1
comp-lzo

pfSenseRocks

It might be bad form to answer your own question but I wanted ensure that this thread has closure.

I found the solution. I had to manually create an interface for VPN (OPT1) and bridge it to the LAN interface. I had assumed that the wizard & settings would have done this automagically like it is on other firmwares.