Raspberry PI

Guest

Hi I am not a linux or hi tech network guy.. but I think with using vlan rasberry pi can be connected to t switch like 8 port layer 2 switch like and 1810 Hp 8port switch and a rasberry pfsense should be able to make use the switch as lan and wan ?

But a MIPS fork instead of an ARM fork would be bring us up to use the UBNT EdgeRouter series from 5 Port and
and 55 € to the Pro model and 360 € that would be in my eyes making more sense to go, related to the circumstance that the UBNT models or EdgeRouter series is a similar used wise hardware.

For sure the newest Tilera TileGx 100 core is ARM based and would be something more likely a
firewall device to solder and get likes a RaspBerry PI.

jahonix

@David_W:

…better candidate boards ... The Beaglebone Black ...

If you stop by the netgate shop you'll find BBBs already.
gonzopancho once mentioned that they are there for a reason.

Another nice device I just saw is the MinnowBoard.
Maybe you could use that as a router-on-stick, but be warned that FreeBSD is NOT mentioned in the compatibility list! Looks like fun none the less!

jwt

FreeBSD runs fine.

Also: http://imgur.com/gallery/hnvhp/new :-)

alex_lebbrom

Any news ?

It's possible to run pfSense on Raspibery PI?

jahonix

No.
Wouldn't make too much sense with only one Ethernet port and that one is hanging off from USB already.

2chemlud

Raspi 3 has wifi and LAN, makes two interfaces.

Would be a cool personal firewall for public wifi. Especially with built-in tunnels and routing through these tunnels. In my opinion.

bsilva

I wouldn't use the Pi performance as a reason against a port.

I have no problem sustaining 100mb/s of SFTP traffic through the ethernet on a Pi2. So, that includes encryption as well as TCP processing.

I haven't benchmarked routing through a Pi (I'll add that to my todo list), but I've used a Pi as a web server to multiple networks in a lab using USB ethernet and have never had a performance issue.

Likewise the VLAN capability. A friend of mine uses a Pi as a DHCP server to 16 networks via VLANs on a Pi-1B.

I think the Pi would be a good low-end platform for PFsense. It's not going to be Enterprise capable, but that's fine. Still plenty of other uses at sub-100Mb/s speeds.

Brad

robi

The Pi was a device originally invented for children and students to learn modern computer science.

Having pfSense on Pi would be a great step in this direction, making students familiar with pfSense will get more bussiness to pfSense in the future (or ESF, or Netgate or whoever will own pfSense rights at that time). It's worth the investment, trust me.

bennyc

@bsilva:

I think the Pi would be a good low-end platform for PFsense. It's not going to be Enterprise capable, but that's fine. Still plenty of other uses at sub-100Mb/s speeds.

While I am a great fan of the pi's (follow ever since they came out, and they do some terrific work here at home), I must admit I have never had the urge to put pfSense on it.
Think of it like your spoons at home. I'm happy with my spoons, but they do a terrible job at cutting my bread. So I don't use them for it ;D

Just kidding ;) If you want arm + low power, I have seen something like an sg-1000 in the store… The price is a bit more, but you get what you pay for. If you subtract the $99 (1y GS, which is also a value), it's not too far of a pi3 anyway. And though I haven't seen any real specs or schematics yet, I suppose the design is better fit for a FW then a PI would be.

But of course, these are my thoughts, you are entirely entitled to yours.....

jwt

We're doing the SG-1000 for $149, and that price includes Gold.

If your needs are met by 2 ports, 200-520Mbps of performance (depends what you measure, and how), you have the world's best open source firewall, in the palm of your hand, with a complete learning environment, (book, hangouts, forum, email), auto config backup and more, all while you're supporting the project.

If you have need of more ports and/or performance, we have solutions, both current and planned that will address these as well.

W4RH34D

A pfsense port on ARM opens up a whole new world on enthusiast routers.

The question is though, can ARM perform up to the standard set by pfsense especially when the RAM can be as small as 256MB.

ivor

@W4RH34D:

A pfsense port on ARM opens up a whole new world on enthusiast routers.

The question is though, can ARM perform up to the standard set by pfsense especially when the RAM can be as small as 256MB.

Not on Raspberry Pi. People will soon learn that ARM is much more than hobbyist platform with low hardware specs. Stay put :)

musicwizard

@jwt:

We're doing the SG-1000 for $149, and that price includes Gold.

If your needs are met by 2 ports, 200-520Mbps of performance (depends what you measure, and how), you have the world's best open source firewall, in the palm of your hand, with a complete learning environment, (book, hangouts, forum, email), auto config backup and more, all while you're supporting the project.

If you have need of more ports and/or performance, we have solutions, both current and planned that will address these as well.

This is very nice. But cant really use it as a "travel" router/vpn.

power off the laptop put the utp cable in the laptop and connect the wifi part to your router/wifi access points elsewhere and you got a really nice travel Pfsense. Dont need super speeds from it.

so in a sense the Pi3 is very nice for that. or connect the pi 3 to your laptop via bluetooth if that also works nice.

Still looking for a good solution for that.

edit:
http://shop.udoo.org/eu/preorder-x86.html

this would be a nice little one. It has a Intel CPU so it can run pfsense.