SNMP information cannot be obtained from the WAN
-
SNMP information cannot be obtained from the WAN
PFSENSE version 2.0.1
PFSESNE 2.0.2 and 2.0.3 is not available from the WAN access to information
That's a BUG you? -
It isn't by default, you have to permit it with firewall rules. and not have SNMP bound to LAN only.
-
If you need to bind SNMP to the LAN, but also access it from the WAN, just add a port forward on the WAN for udp/161 forwarding it to the LAN IP.
-
If you need to bind SNMP to the LAN, but also access it from the WAN, just add a port forward on the WAN for udp/161 forwarding it to the LAN IP.
I am sorry
I've been trying to get users to access through NAT from the WAN side ways PFSESNE
SNMP set to LAN (not ALL)
Unable to obtain the information
I nee -
@cmb:
It isn't by default, you have to permit it with firewall rules. and not have SNMP bound to LAN only.
Of course, I know the firewall to allow to connect to
I tried WAN interfaces allow access to UDP 161 PORT TO WAN ADDRESS
I tried all LAN interfaces to allow
Set SNMP for LAN and WAN NAT entry. failed
(Of course, firewall rules are automatically LINK)Please help thanks
