Squid 3.3.4 package for pfsense with ssl filtering
-
Hello
Since 2.1 RC1
Latest Squid doesn't works anymore:Aug 6 08:54:33 (squid-1): I don't handle this error well!
Aug 6 08:54:33 squid[64384]: Squid Parent: (squid-1) process 71825 exited with status 1
Aug 6 08:54:36 squid[64384]: Squid Parent: (squid-1) process 76944 started
Aug 6 08:54:38 (squid-1): I don't handle this error well!
Aug 6 08:54:38 squid[64384]: Squid Parent: (squid-1) process 76944 exited with status 1
Aug 6 08:54:38 squid[64384]: Squid Parent: (squid-1) process 76944 will not be restarted due to repeated, frequent failures
Aug 6 08:54:38 squid[64384]: Exiting due to repeated, frequent failuresIs there a turnaround ?
-
Squid was updated to 3.3.8 but I'm having no time to test if it was working properly or not.
-
It's working
juste had to save the settings (with no change)
Service restarted and didn't crashed -
Pretty sure I just figured out why my port was CLOSED.
I had Allow IPv6 disabled under System -> Advanced -> Networking
After checking that box and restarting squid:
tcp4 0 0 192.168.56.254.3128 . LISTEN
Finally… a-testing I will go.
-
hi
i want to install squid tahat support icap and integrate with anti virus.but i dont now.
can you help? -
hi
i want to install squid tahat support icap and integrate with anti virus.but i dont now.
can you help?It's still under development on squid3-dev
-
I was wondering if Dansguardian is suppose to be working on this version of squid?
I am on PFSense 2.1(AMD64). DG works with Squid3 but not the dev version.
For some reason DG is unable to connect with Squid3dev.
Squid3dev works perfectly on its own.
-
I use dansguardian with squid3-dev.
What errors are you getting?
-
I use dansguardian with squid3-dev.
What errors are you getting?
Dansguardian: error connecting to proxy. Same error as Legion on page 2.
I have it upstream to a proxy server on port 3128.
works fine with squid3.
Thnx
-
Check if squid is listening(netstat -an | grep -i listen) on the port you have configured on dansguardian.
-
Check if squid is listening(netstat -an | grep -i listen) on the port you have configured on dansguardian.
It is closed.
-
-
It is closed.
Next step is to check why squid is not starting…
The service is running, just doesn't listen to the port.
-
The service is running, just doesn't listen to the port.
Enable ipv6 on pfsense and then killall and start squid daemon.
It's something on squid 3.3 version, I have a squid 3.3 version on my repo without ipv6 that works fine.
If you do not want to enable ipv6 on your server, install squid 3.3.4 form my repo using pkg_delete and pkg_add from console/ssh
-
The service is running, just doesn't listen to the port.
Enable ipv6 on pfsense and then killall and start squid daemon.
It's something on squid 3.3 version, I have a squid 3.3 version on my repo without ipv6 that works fine.
If you do not want to enable ipv6 on your server, install squid 3.3.4 form my repo using pkg_delete and pkg_add from console/ssh
Thank you very much! Enabling ipv6 works.
;D
-
MULTIWAN
Hello, you work the proxy-dev ver. 3.3.8 with the multi-WAN? Before working with version 2.7.9 using this guide http://forum.pfsense.org/index.php?topic=60977.0, now I installed version 3.3.8-dev and it does not work. With the release of squid that is found in this post (3.3.4) will it work?
thanks
greetings -
Did you upgraded pfsense too?
What version are you using?
-
-
If you are getting missing libs erros like Shared object "libgssapi.so.10" not found, required by "squid"',
Copy it from my personal repo or from any freebsd with the same version.
These are libs that are not included on pfsense base install bu required to sasl.
save it to /usr/local/lib
amd64
http://e-sac.siteseguro.ws/pfsense/8/amd64/All/ldd/i386
http://e-sac.siteseguro.ws/pfsense/8/All/ldd/
- Shared object "libheimntlm.so.10" not found,
-
-
sorry I don't understand
On console/ssh use pkg_delete to remove squid-3.3.4 and pkg_add to get squid 3.3.5
i386 systems
pkg_add -r http://e-sac.siteseguro.ws/packages/8/All/squid-3.3.5.tbzamd64 systems
pkg_add -r http://e-sac.siteseguro.ws/packages/amd64/8/All/squid-3.3.5.tbzCan you provide a URL that is available from the USA? This URL returns "Unable to get the … and Operation timed out."
The URL when Pinged gives me an IP address, but I cannot replace the "e-sac.siteseguro.ws" with an IP address and have it work.
David
-
Can you provide a URL that is available from the USA?
Unfortunately No. :(
Do you have pfblocker enabled with brazil on your block list?
To get squid working without changing package files, just enable ipv6 on your 2.0.x version and get missing files from any freebsd 8.1 server.
The URL when Pinged gives me an IP address, but I cannot replace the "e-sac.siteseguro.ws" with an IP address and have it work.
It's a hosting server, only dns http headers will reach my files.
