Site A to Site B to StrongVPN
-
Hi,
I need help with setting up this.
SiteA OPENVPNconnection to SiteB
SiteB OPENVPNconnection StrongVPN
And force all traffic from SiteA to go out on StrongVPN–-----
SiteB to StrongVPN is up and running.
SiteA to SiteB is not up and running but its no problem.
–-----
The problem lies with that I dont know how to configuere the firewall on SiteB so that incomming from SiteA goes to StrongVPN.
And is it possible to have another Site (c) that does the same as SiteA? -
bump
-
The problem lies with that I dont know how to configuere the firewall on SiteB so that incomming from SiteA goes to StrongVPN.
And is it possible to have another Sitethat does the same as SiteA?
Seems the question is too easy to give an answer ;)
Open firewall rules on interface "openvpn" to let all source traffice from <network site="" a="" c="">to <any or="" !private="">out… and back.
You can see what traffic is blocked by taking a look onto Status => System Logs => Firewall</any></network> -
If you are not already having the StrongVPN link out of siteA as the default gateway for pfSenseA, then you will need to use policy-routing on the OpenVPN rules mentioned by @Reiner30 - in the Advanced of the rules, select the StrongVPN as the gateway for the traffic.
Make sure your pass policy-routing rules on incoming OpenVPN specify something like "source <network a|network="" c="">destination (or destination )" - you don't want to route packets from network a to network b, straight past and out the StrongVPN.</network>