Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    [updated with new ifconfs/iperf] config. causing 300Mbps drop in lan performance

    General pfSense Questions
    2
    22
    6.0k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • stephenw10S
      stephenw10 Netgate Administrator
      last edited by

      Nope, I meant VLAN hardware tagging. It's not available on all NICs.
      However it's also possibly a problem with where the off loading features are set. As they can also be set (or not) on the VLAN interface.

      So I had taken some info from other threads of yours, perhaps incorrectly. Please detail the hardware in each machine. Also give the output of ifconfig for each.

      Steve

      1 Reply Last reply Reply Quote 0
      • cmcdonaldC
        cmcdonald Netgate Developer
        last edited by

        @stephenw10:

        Nope, I meant VLAN hardware tagging. It's not available on all NICs.
        However it's also possibly a problem with where the off loading features are set. As they can also be set (or not) on the VLAN interface.

        So I had taken some info from other threads of yours, perhaps incorrectly. Please detail the hardware in each machine. Also give the output of ifconfig for each.

        Steve

        I'll post the ifconfigs when I get off work. But here Ill post the hardware for each machine

        Mobo: http://www.newegg.com/Product/Product.aspx?Item=N82E16813121743

        Processor: Core i3 3220 ivy bridge

        The NICs in question are onboard:

        1x 82574
        1x 82579

        I use the onboard nics for sync and lan

        I also have a dual port Intel pro/1000 server adapter which I use for wan, and one for future use.

        Left box

        $ ifconfig
        em0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        	options=4009b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso>ether 00:15:17:20:d5:00
        	inet xxx.xxx.xxx.226 netmask 0xfffffff8 broadcast xxx.xxx.xxx.231
        	inet6 fe80::215:17ff:fe20:d500%em0 prefixlen 64 scopeid 0x1 
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        em1: flags=8c02 <broadcast,oactive,simplex,multicast>metric 0 mtu 1500
        	options=4019b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso>ether 00:15:17:20:d5:01
        	media: Ethernet autoselect
        	status: no carrier
        em2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=4209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso>ether 70:54:d2:ab:24:b9
        	inet 192.168.1.1 netmask 0xfffffffc broadcast 192.168.1.3
        	inet6 fe80::7254:d2ff:feab:24b9%em2 prefixlen 64 scopeid 0x3 
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        em3: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        	options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 70:54:d2:ab:24:ba
        	inet6 fe80::7254:d2ff:feab:24ba%em3 prefixlen 64 scopeid 0x4 
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        pfsync0: flags=0<> metric 0 mtu 1460
        	syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
        enc0: flags=0<> metric 0 mtu 1536
        lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
        	options=3 <rxcsum,txcsum>inet 127.0.0.1 netmask 0xff000000 
        	inet6 ::1 prefixlen 128 
        	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 
        	nd6 options=43 <performnud,accept_rtadv>pflog0: flags=100 <promisc>metric 0 mtu 33664
        em3_vlan10: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:24:ba
        	inet6 fe80::215:17ff:fe20:d500%em3_vlan10 prefixlen 64 scopeid 0x9 
        	inet 192.168.10.2 netmask 0xffffff00 broadcast 192.168.10.255
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        	vlan: 10 parent interface: em3
        em3_vlan20: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:24:ba
        	inet6 fe80::215:17ff:fe20:d500%em3_vlan20 prefixlen 64 scopeid 0xa 
        	inet 192.168.20.2 netmask 0xffffff00 broadcast 192.168.20.255
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        	vlan: 20 parent interface: em3
        em3_vlan30: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
        	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:24:ba
        	inet6 fe80::215:17ff:fe20:d500%em3_vlan30 prefixlen 64 scopeid 0xb 
        	inet 172.16.0.2 netmask 0xfffffc00 broadcast 172.16.3.255
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        	vlan: 30 parent interface: em3
        vip1: flags=49 <up,loopback,running>metric 0 mtu 1500
        	inet xxx.xxx..xxx.225 netmask 0xfffffff8 
        	carp: MASTER vhid 1 advbase 1 advskew 0
        vip2: flags=49 <up,loopback,running>metric 0 mtu 1500
        	inet 192.168.10.1 netmask 0xffffff00 
        	carp: MASTER vhid 2 advbase 1 advskew 0
        vip3: flags=49 <up,loopback,running>metric 0 mtu 1500
        	inet 192.168.20.1 netmask 0xffffff00 
        	carp: MASTER vhid 3 advbase 1 advskew 0
        vip4: flags=49 <up,loopback,running>metric 0 mtu 1500
        	inet 172.16.0.1 netmask 0xfffffc00 
        	carp: MASTER vhid 4 advbase 1 advskew 0
        pptpd0: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500</pointopoint,noarp,simplex,multicast></up,loopback,running></up,loopback,running></up,loopback,running></up,loopback,running></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,promisc,simplex,multicast></promisc></performnud,accept_rtadv></rxcsum,txcsum></up,loopback,running,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso></broadcast,oactive,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast>
        

        Right box

        
        $ ifconfig
        em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=4009b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso>ether 00:15:17:6a:df:b8
        	inet xxx.xxx.xxx.227 netmask 0xfffffff8 broadcast xxx.xxx.xxx.231
        	inet6 fe80::215:17ff:fe6a:dfb8%em0 prefixlen 64 scopeid 0x1 
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        em1: flags=8c02 <broadcast,oactive,simplex,multicast>metric 0 mtu 1500
        	options=4019b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso>ether 00:15:17:6a:df:b9
        	media: Ethernet autoselect
        	status: no carrier
        em2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=4209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso>ether 70:54:d2:ab:1e:32
        	inet 192.168.1.2 netmask 0xfffffffc broadcast 192.168.1.3
        	inet6 fe80::7254:d2ff:feab:1e32%em2 prefixlen 64 scopeid 0x3 
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        em3: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 70:54:d2:ab:1e:33
        	inet6 fe80::7254:d2ff:feab:1e33%em3 prefixlen 64 scopeid 0x4 
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        pfsync0: flags=0<> metric 0 mtu 1460
        	syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
        enc0: flags=0<> metric 0 mtu 1536
        lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
        	options=3 <rxcsum,txcsum>inet 127.0.0.1 netmask 0xff000000 
        	inet6 ::1 prefixlen 128 
        	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 
        	nd6 options=43 <performnud,accept_rtadv>pflog0: flags=100 <promisc>metric 0 mtu 33664
        em3_vlan10: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:1e:33
        	inet6 fe80::215:17ff:fe6a:dfb8%em3_vlan10 prefixlen 64 scopeid 0x9 
        	inet 192.168.10.3 netmask 0xffffff00 broadcast 192.168.10.255
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        	vlan: 10 parent interface: em3
        em3_vlan20: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:1e:33
        	inet6 fe80::215:17ff:fe6a:dfb8%em3_vlan20 prefixlen 64 scopeid 0xa 
        	inet 192.168.20.3 netmask 0xffffff00 broadcast 192.168.20.255
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        	vlan: 20 parent interface: em3
        em3_vlan30: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
        	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:1e:33
        	inet6 fe80::215:17ff:fe6a:dfb8%em3_vlan30 prefixlen 64 scopeid 0xb 
        	inet 172.16.0.3 netmask 0xfffffc00 broadcast 172.16.3.255
        	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
        	status: active
        	vlan: 30 parent interface: em3</full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></promisc></performnud,accept_rtadv></rxcsum,txcsum></up,loopback,running,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso></broadcast,oactive,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso></up,broadcast,running,simplex,multicast>
        

        Need help fast? https://www.netgate.com/support

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          Hmm, OK
          The left box has em3 and all it's VLAN interfaces set with the 'promisc' flag and the right box does not. That could be causing some large overhead as the NIC/CPU has to respond to all packets. This could be the result of some test you have run or maybe something else.

          However the test is faster when the iperf server is running on the left box.

          Which of the interfaces, em0-3, is which hardware NIC?

          Steve

          1 Reply Last reply Reply Quote 0
          • cmcdonaldC
            cmcdonald Netgate Developer
            last edited by

            Okay I've discovered that upon assigning CARP VIPS, the respective interfaces (and parent interface) automatically enable promiscuous mode.

            Ugh nvm… I really want to figure this out  >:(

            em0-1 is dual port server card (WAN and unassigned)
            em2-3 is mobo nics (LAN and Sync, repsectively)

            Edit:

            I am now seeing the speed drop consistent in both directions:

            Left box:

            $ ifconfig
            em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=4009b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso>ether 00:15:17:20:d5:00
            	inet xxx.xxx.xxx.226 netmask 0xfffffff8 broadcast xxx.xxx.xxx.231
            	inet6 fe80::215:17ff:fe20:d500%em0 prefixlen 64 scopeid 0x1 
            	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            em1: flags=8c02 <broadcast,oactive,simplex,multicast>metric 0 mtu 1500
            	options=4019b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso>ether 00:15:17:20:d5:01
            	media: Ethernet autoselect
            	status: no carrier
            em2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=4209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso>ether 70:54:d2:ab:24:b9
            	inet 192.168.1.1 netmask 0xfffffffc broadcast 192.168.1.3
            	inet6 fe80::7254:d2ff:feab:24b9%em2 prefixlen 64 scopeid 0x3 
            	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            em3: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 70:54:d2:ab:24:ba
            	inet6 fe80::7254:d2ff:feab:24ba%em3 prefixlen 64 scopeid 0x4 
            	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            pfsync0: flags=0<> metric 0 mtu 1460
            	syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
            enc0: flags=0<> metric 0 mtu 1536
            lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
            	options=3 <rxcsum,txcsum>inet 127.0.0.1 netmask 0xff000000 
            	inet6 ::1 prefixlen 128 
            	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 
            	nd6 options=43 <performnud,accept_rtadv>pflog0: flags=100 <promisc>metric 0 mtu 33664
            em3_vlan10: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:24:ba
            	inet6 fe80::215:17ff:fe20:d500%em3_vlan10 prefixlen 64 scopeid 0x9 
            	inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255
            	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            	vlan: 10 parent interface: em3
            em3_vlan20: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:24:ba
            	inet6 fe80::215:17ff:fe20:d500%em3_vlan20 prefixlen 64 scopeid 0xa 
            	inet 192.168.20.1 netmask 0xffffff00 broadcast 192.168.20.255
            	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            	vlan: 20 parent interface: em3
            em3_vlan30: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:24:ba
            	inet6 fe80::215:17ff:fe20:d500%em3_vlan30 prefixlen 64 scopeid 0xb 
            	inet 172.16.0.1 netmask 0xfffffc00 broadcast 172.16.3.255
            	nd6 options=43 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            	vlan: 30 parent interface: em3
            pptpd0: flags=8890 <pointopoint,noarp,simplex,multicast>metric 0 mtu 1500</pointopoint,noarp,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></promisc></performnud,accept_rtadv></rxcsum,txcsum></up,loopback,running,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso></broadcast,oactive,simplex,multicast></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso></up,broadcast,running,simplex,multicast>
            

            Right box:

            $ ifconfig
            em0: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=4009b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso>ether 00:15:17:6a:df:b8
            	inet xxx.xxx.xxx.227 netmask 0xfffffff8 broadcast xxx.xxx.xxx.231
            	inet6 fe80::215:17ff:fe6a:dfb8%em0 prefixlen 64 scopeid 0x1 
            	nd6 options=1 <performnud>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            em1: flags=8c02 <broadcast,oactive,simplex,multicast>metric 0 mtu 1500
            	options=4019b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso>ether 00:15:17:6a:df:b9
            	media: Ethernet autoselect
            	status: no carrier
            em2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=4209b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso>ether 70:54:d2:ab:1e:32
            	inet 192.168.1.2 netmask 0xffffff00 broadcast 192.168.1.255
            	inet6 fe80::7254:d2ff:feab:1e32%em2 prefixlen 64 scopeid 0x3 
            	nd6 options=1 <performnud>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            em3: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=5219b <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso>ether 70:54:d2:ab:1e:33
            	inet6 fe80::7254:d2ff:feab:1e33%em3 prefixlen 64 scopeid 0x4 
            	nd6 options=3 <performnud,accept_rtadv>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            enc0: flags=0<> metric 0 mtu 1536
            pflog0: flags=100 <promisc>metric 0 mtu 33144
            lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
            	options=3 <rxcsum,txcsum>inet 127.0.0.1 netmask 0xff000000 
            	inet6 ::1 prefixlen 128 
            	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7 
            	nd6 options=3 <performnud,accept_rtadv>pfsync0: flags=0<> metric 0 mtu 1460
            	syncpeer: 224.0.0.240 maxupd: 128 syncok: 1
            em3_vlan10: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:1e:33
            	inet6 fe80::215:17ff:fe6a:dfb8%em3_vlan10 prefixlen 64 scopeid 0x9 
            	inet 192.168.10.2 netmask 0xffffff00 broadcast 192.168.10.255
            	nd6 options=1 <performnud>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            	vlan: 10 vlanpcp: 0 parent interface: em3
            em3_vlan20: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:1e:33
            	inet6 fe80::215:17ff:fe6a:dfb8%em3_vlan20 prefixlen 64 scopeid 0xa 
            	inet 192.168.20.2 netmask 0xffffff00 broadcast 192.168.20.255
            	nd6 options=1 <performnud>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            	vlan: 20 vlanpcp: 0 parent interface: em3
            em3_vlan30: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
            	options=103 <rxcsum,txcsum,tso4>ether 70:54:d2:ab:1e:33
            	inet6 fe80::215:17ff:fe6a:dfb8%em3_vlan30 prefixlen 64 scopeid 0xb 
            	inet 172.16.0.2 netmask 0xfffffc00 broadcast 172.16.3.255
            	nd6 options=1 <performnud>media: Ethernet autoselect (1000baseT <full-duplex>)
            	status: active
            	vlan: 30 vlanpcp: 0 parent interface: em3</full-duplex></performnud></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></full-duplex></performnud></rxcsum,txcsum,tso4></up,broadcast,running,simplex,multicast></performnud,accept_rtadv></rxcsum,txcsum></up,loopback,running,multicast></promisc></full-duplex></performnud,accept_rtadv></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast></full-duplex></performnud></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwtso></up,broadcast,running,simplex,multicast></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,vlan_hwtso></broadcast,oactive,simplex,multicast></full-duplex></performnud></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,vlan_hwtso></up,broadcast,running,simplex,multicast>
            

            Need help fast? https://www.netgate.com/support

            1 Reply Last reply Reply Quote 0
            • cmcdonaldC
              cmcdonald Netgate Developer
              last edited by

              ------------------------------------------------------------
              Client connecting to 192.168.10.1, TCP port 5001
              TCP window size: 65.0 KByte (default)
              ------------------------------------------------------------
              [  8] local 192.168.10.2 port 44835 connected with 192.168.10.1 port 5001
              [ ID] Interval       Transfer     Bandwidth
              [  8]  0.0-10.0 sec   935 MBytes   784 Mbits/sec
              
              ------------------------------------------------------------
              Client connecting to 192.168.10.2, TCP port 5001
              TCP window size: 65.0 KByte (default)
              ------------------------------------------------------------
              [  8] local 192.168.10.1 port 29825 connected with 192.168.10.2 port 5001
              [ ID] Interval       Transfer     Bandwidth
              [  8]  0.0-10.0 sec   828 MBytes   695 Mbits/sec
              

              Need help fast? https://www.netgate.com/support

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                What change did you make to remove the promiscuous flag from left em3?

                Since that seems to have had the opposite effect what happens if you enable promiscuous mode on both em3 NICs?

                Steve

                1 Reply Last reply Reply Quote 0
                • cmcdonaldC
                  cmcdonald Netgate Developer
                  last edited by

                  @stephenw10:

                  What change did you make to remove the promiscuous flag from left em3?

                  Since that seems to have had the opposite effect what happens if you enable promiscuous mode on both em3 NICs?

                  Steve

                  Here is what I've done. Removed all interfaces (sans WAN interface, I need this to vpn into my boxes). Removed all VLAN interfaces. and Removed all CARP VIPs on all interfaces. I noticed that simply adding CARP VIPs forces all respective interfaces into promiscuous mode. Then I went and reconfigured everything.

                  Need help fast? https://www.netgate.com/support

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Enabling any sort of virtual interface on a physical one necessitates promiscuous mode as it has to respond to more than one MAC address.

                    I have no idea why that would speed up the throughput though. Anyone else?  :-\

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • cmcdonaldC
                      cmcdonald Netgate Developer
                      last edited by

                      @stephenw10:

                      Enabling any sort of virtual interface on a physical one necessitates promiscuous mode as it has to respond to more than one MAC address.

                      I have no idea why that would speed up the throughput though. Anyone else?  :-\

                      Steve

                      Thanks for the help! I have posted my most recent ifconfigs and tests. Also, I also committed one of my boxes to the most recent 2.1 build to see if any difference would be made. The version difference now adds another variable to the mix but I had no more ideas…

                      Anybody?

                      Need help fast? https://www.netgate.com/support

                      1 Reply Last reply Reply Quote 0
                      • cmcdonaldC
                        cmcdonald Netgate Developer
                        last edited by

                        Correct me if I am wrong, but as I understand it, VLAN tagging occurs when packets leave an interface. Therefore, my results can be interpreted in the following way:

                        First, FreeBSD 8.3 em drivers tag packets "faster" than 8.1 drivers. This can be seen by observing the performance difference between vlan tagging on traffic originating from a 2.1 and a 2.0.3 box (see my first post). Path #1 reveals a performance metric slightly higher than Path #2. Path #1 traffic is originating from a pfSense 2.1 box, Path #2 traffic is originating from a pfSense 2.0.3 box. I would imagine that if I updated my "left" box to 2.1, that I would obtain slightly higher throughput.

                        Second, I performed another test by disabling all VLANs on the "right" box and simply untagged its LAN switch port to VLAN 10 (Management). Simply, ALL VLAN TAGGING IS DISABLED on the "right" box. Here are the results:
                        Path #1

                        Path #2

                        Notice that when a box is not tagging VLANS, the outbound performance shoots up again! This tells me a few things:

                        First, my switch isn't the problem. As these packets are having to be tagged before approaching the "left" box, or untagged when approaching the "right" box. My switch is handling the tagging/untagging just fine. Second, this further supports my first interpretation that VLAN tagging on pfSense is what is causing the performance degradation.

                        Now, is this simply a limitation to my pfSense hardware? My hardware is already "overkill" by most pfSense standards. I like to look "ahead" when making hardware purchases. So this was intentional. However, is it safe to put this to rest and call it a hardware limitation or is there something I am overlooking. Some configuration problem that is causing the performance degradation?

                        Need help fast? https://www.netgate.com/support

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          To test your tagging theory you should have disabled the VLANs on the left box. As is stands the results above are the same as with VLAN tagging on the box, left-to-right 700Mb and right-to-left 900Mb.

                          Also I'm pretty sure both boxes were running 2.0.3 when I last looked at this thread, did you upgrade one? Try upgrading both. The newer drivers in 8.3 might well be making better use of the hardware features of the NIC.

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • cmcdonaldC
                            cmcdonald Netgate Developer
                            last edited by

                            @stephenw10:

                            To test your tagging theory you should have disabled the VLANs on the left box. As is stands the results above are the same as with VLAN tagging on the box, left-to-right 700Mb and right-to-left 900Mb.

                            Also I'm pretty sure both boxes were running 2.0.3 when I last looked at this thread, did you upgrade one? Try upgrading both. The newer drivers in 8.3 might well be making better use of the hardware features of the NIC.

                            Steve

                            You are correct, but notice that in the original post, the "right-to-left" test was performed from a 2.1 box. The speeds are clearly slower than usual. However, upon disabling VLANS on the right box, "right-to-left" performance jumped back up to 900+ Mbps (which is about as fast as you'll ever see gigabit flow). My left box is acting as my production box at the moment. Although they will both be configured for CARP soon, I will have to get my "right" box assuming the production roles before attempting such a test. I might take down the VLANS on the production box tonight and run tests.

                            Simply, the "right-to-left" vs "left-to-right" difference seen in my original post is simply attributed to more efficient driver support in 8.3 (as opposed to 8.1).

                            What I would be very curious in seeing other people's iperf results with similar conditions. Basically, running the client behind an interface that is tagging multiple VLANs.

                            Need help fast? https://www.netgate.com/support

                            1 Reply Last reply Reply Quote 0
                            • cmcdonaldC
                              cmcdonald Netgate Developer
                              last edited by

                              Update: I decided to figure out which of the two OEM cards I am tagging on.

                              I simple command revealed the following:

                              
                              $ pciconf -lv
                              em0@pci0:1:0:0: class=0x020000 card=0x135e8086 chip=0x105e8086 rev=0x06 hdr=0x00
                                  class      = network
                                  subclass   = ethernet
                              em1@pci0:1:0:1: class=0x020000 card=0x135e8086 chip=0x105e8086 rev=0x06 hdr=0x00
                                  class      = network
                                  subclass   = ethernet
                              em2@pci0:0:25:0:        class=0x020000 card=0x202d8086 chip=0x15028086 rev=0x05 hdr=0x00
                                  class      = network
                                  subclass   = ethernet
                              em3@pci0:3:0:0: class=0x020000 card=0x202d8086 chip=0x10d38086 rev=0x00 hdr=0x00
                                  class      = network
                                  subclass   = ethernet
                              
                              

                              I know that the em0/1 cards are identical (hence the same chip value 0x[DevID][VendorID]) A simple search of the list of retail cards http://www.intel.com/support/network/sb/cs-012904.htm reveals that it is indeed a  Intel Pro/1000 PT dual card. As expected.

                              The manual isn't very clear which of the two board NICs is the 82579LM  or the 82574L. However, after bouncing the DeviceID and VendorID against the OEM database, I have discovered that my LAN interface is using the 82574L card and not the 82579LM card.

                              Here are their respective ARK sheets:
                              http://ark.intel.com/products/47620/Intel-82579LM-Gigabit-Ethernet-PHY
                              http://ark.intel.com/products/32209/Intel-82574L-Gigabit-Ethernet-Controller

                              Some interesting finds:

                              First, the 82574L Controller is also used the Pro/1000 CT Desktop retail boards.
                              Second, the 82579LM is also ~3 years newer.
                              Third, clearly I should either be using the second port on my PT board or the 82579LM. I believe I am using the "worst" of the three controllers in my boxes for my LAN interface.

                              These boxes are about 900 miles away from my present location. I do all of my work remotely. I will be getting one of my guys on site to move some cables around in the morning and report back with new metrics.

                              I have both boxes connected directly through the 82579LM (this is my dedicated sync interface). Is it possible to tag and trunk vlans over a direct connection without a switch? I might give this a try as well to see how performance goes over the 8259LM (instead of having to move cables around).


                              Edit #1:
                              Okay here is the current testing setup:

                              I am now tagging on the 8259LM card on both boxes. I have three VLANS and static IPs are assigned across the board.
                              VLAN 100, 200, 300
                              left 100: 192.168.1.1/24
                              left 200: 192.168.2.1/24
                              left 300: 192.168.3.1/24

                              right 100: 192.168.1.2/24
                              right 200: 192.168.2.2/24
                              right 300: 192.168.3.2/24

                              Here are the results:
                              Path #1:

                              Path #2:

                              Now, unless my switch is causing these issues (which is very unlikely, I have already consulted my switch manufacturers message boards), the issue has got to be the 82574L (CT Desktop card).


                              Edit #2:

                              I just did a serious hardcore test using the setup in Edit #1.

                              Here is what I did. Ran an iPerf across VLAN 100 from "right-to-left" for 60 seconds. While running that test, I then ran another iperf across VLAN 200 from "left-to-right". Even saturating the bandwidth both tests averaged at around 880 Mbps. That isn't bad at all! Considering packets were flying like mad.

                              Need help fast? https://www.netgate.com/support

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                Ah, that's an interesting result.  :)
                                I will say that the 82574 was until very recently one of Intel's most popular NIC chips, used just about everywhere. I would be very surprised if it was a hardware problem. That's the chip that suffered the 'packet of death' and the reason it was so worrying was that chip is everywhere. PoD not an issue by the way.  ;)

                                Is it possible to tag and trunk vlans over a direct connection without a switch?

                                I take it you have discovered it is possible.

                                Steve

                                1 Reply Last reply Reply Quote 0
                                • cmcdonaldC
                                  cmcdonald Netgate Developer
                                  last edited by

                                  @stephenw10:

                                  Ah, that's an interesting result.  :)
                                  I will say that the 82574 was until very recently one of Intel's most popular NIC chips, used just about everywhere. I would be very surprised if it was a hardware problem. That's the chip that suffered the 'packet of death' and the reason it was so worrying was that chip is everywhere. PoD not an issue by the way.  ;)

                                  Is it possible to tag and trunk vlans over a direct connection without a switch?

                                  I take it you have discovered it is possible.

                                  Steve

                                  Okay I can confirm that moving my LAN connection to the 82579LM (and changing the parent interface of the three VLANs) results in 915-935 Mbps speeds in both directions! Sweet! :) I had my contact move the LAN connection to the 82579LM on both boxes and I just made the configuration change. So my findings were correct. The 82574L just doesn't handle VLAN tagging as well as it could. Clearly from the ARK sheets, the 82574L controller was designed more for endpoint devices, not server hardware. However, the 82579LM is a much more capable controller.

                                  Thanks

                                  Need help fast? https://www.netgate.com/support

                                  1 Reply Last reply Reply Quote 0
                                  • stephenw10S
                                    stephenw10 Netgate Administrator
                                    last edited by

                                    You could try disabling the hardware VLAN tagging on the 82574 and do it in software instead. I believe the command for that would be:

                                    ifconfig em3 -VLAN_HWTAGGING
                                    

                                    Interestingly I see that it also supports VLAN_HWFILTER which em2 does not. Perhaps the FreeBSD driver in 2.0.X attempts to use this feature and it ends up actually slowing the connection?

                                    Stve

                                    1 Reply Last reply Reply Quote 0
                                    • cmcdonaldC
                                      cmcdonald Netgate Developer
                                      last edited by

                                      @stephenw10:

                                      You could try disabling the hardware VLAN tagging on the 82574 and do it in software instead. I believe the command for that would be:

                                      ifconfig em3 -VLAN_HWTAGGING
                                      

                                      Interestingly I see that it also supports VLAN_HWFILTER which em2 does not. Perhaps the FreeBSD driver in 2.0.X attempts to use this feature and it ends up actually slowing the connection?

                                      Stve

                                      I'm not quite following you. Both em2 and em3 show VLAN_HWFILTER as an option

                                      em3: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                      	options=5219b<rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,tso4,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast>
                                      
                                      em2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
                                      	options=5209b<rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwfilter,vlan_hwtso></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,vlan_hwcsum,wol_magic,vlan_hwfilter,vlan_hwtso></up,broadcast,running,simplex,multicast>
                                      

                                      Need help fast? https://www.netgate.com/support

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Oops! My mistake, not sure how that happened.  :-[

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post
                                        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.