Rules to set for Windows XP VPN client?
-
I can't find correct setup to let VPN client (protected by pfSense) connect to a VPN server (not pfSense):
Setting up a rule that allow any protocol to the vpn server destination network and setting up logging I get:
Sep 11 15:37:30 pf: 1. 330765 rule 1313/0(match): pass in on vlan110: 192.168.1.101 > 193.xxx.xxx.235: GREv1, call 58368, seq 0, proto PPP (0x880b), length 37: LCP (0xc021), length 25: LCP, Conf-Request (0x01), id 0, length 23
Sep 11 15:37:29 pf: 7. 364103 rule 1313/0(match): pass in on vlan110: 192.168.1.101.3602 > 193.xxx.xxx.235.1723: S 4175292875:4175292875(0) win 65535 <mss 1460,nop,nop,sackok="">Sep 11 15:36:59 pf: 1. 180144 rule 1313/0(match): pass in on vlan110: 192.168.1.101 > 193.xxx.xxx.234: GREv1, call 56192, seq 0, proto PPP (0x880b), length 37: LCP (0xc021), length 25: LCP, Conf-Request (0x01), id 0, length 23Note that server ip address setup in the client is 193.xxx.xxx.234 but captured packets regards 193.xxx.xxx.234 and 193.xxx.xxx.235.
Anyone can help me to setup a rule more restrictive than "any protocol".
Thanks in advance.
Davide.</mss>