Tarjeta Alix

acriollo

Hola a todos.

Alguien pudiera ayudarme diciendome que version de pfsense tengo que instalar para una tarjeta Alix con una Flash de 1 GB?

Actualmente lo tengo corriendo con 1.2.3 pero me gustaria actualizarlo .

Estoy asumiendo que es la version serial memstick pero no estoy muy seguro entre tantas versiones que aparecen.

De antemano gracias.

Saludos a todos

ptt

Las versiones que dicen "memstick" son el equivalente a la ISO para CD, permiten crear un Pendrive booteable….

Para las platformas embebidas, y corriendo en CF, debes utilizar las "NanoBSD"

mas info: http://pfsense.org/index.php@option=com_content&task=view&id=43&Itemid=44.html

acriollo

PTT, eres el jefe .. Esa info no la habia visto.

Ahora. algunas versiones dicen x386 o amd , antes habia una version para sistemas embebidos con conexion serial . ahora cual deberia de escoger ?

Gracias de antemano

ptt

Basicamente, hablando "mal y pronto"

i386, para procesadores de 32Bits

AMD64 para procesadores de 64Bits (tanto AMD como Intel)

Architectures
Starting with pfSense 2.0, there are versions for both i386 (32-bit) and amd64 (64-bit) architectures. This architecture is noted in each of the filenames for download. If you are unsure which version to use, then use i386. It is the most mature and well-tested architecture, and it will work on both 32-bit and 64-bit capable systems. The amd64 architecture (which does work even on Intel 64-bit CPUs) can address more memory and may have other performance advantages, but requires a compatible CPU.

Para un CF de 1Gb, utilizas la "NanoBSD" de 1Gb

Embedded (NanoBSD)

The embedded version is specifically tailored for use with any hardware using Compact Flash rather than a hard drive. CF cards can only handle a limited number of writes, so the embedded version runs read only from CF, with read/write file systems as RAM disks. The NanoBSD platform has two OS slices and a config slice. One OS slice is used to boot from, the other is used for upgrades, and the config slice is where the configuration is held separately.

There are two variations of the NanoBSD platform: The default version which uses a serial console, and another that supports using a VGA console. Each of those variations also comes sized for different sizes of CF cards.

The filename for NanoBSD downloads is laid out as follows: pfSense-2.0.3-RELEASE-size-arch-nanobsd.img.gz. In that filename, size can be one of 512mb, 1g, 2g, or 4g. The arch, as above is for i386 or amd64. The nanobsd part can is either nanobsd for serial console, or nanobsd_vga for the VGA-enabled version.

http://doc.pfsense.org/index.php/UpgradeGuide

acriollo

Gracias nuevamente PTT.

Intentare con la version 1Gb para i386.

saludos

ptt

Revisa atentamente la Guia de actualización (link de mi post anterior) allí tienes toda la info necesaria…. si la sigues, seguro No tendrás ningun problema....

acriollo

Gracias ptt. Actualizo en cuanto lo tenga instalado.

Saludos