No buffer space available
-
Hi there!
ย I'm using pfSense 2.0.3, when I try to ping www.facebook.com or www.catho.com.br, ping returnsping: sendto: No buffer space available
I've increased nmbclusters to 524288, no success; tried using nmbcluster=0, same thing.
netstat -m
17010/2065/19075 mbufs in use (current/cache/total)
16321/1973/18294/524288 mbuf clusters in use (current/cache/total/max)
16320/1216 mbuf+clusters out of packet secondary zone in use (current/cache)
0/215/215/262144 4k (page size) jumbo clusters in use (current/cache/total/max)
0/0/0/131072 9k jumbo clusters in use (current/cache/total/max)
0/0/0/65536 16k jumbo clusters in use (current/cache/total/max)
41147K/5838K/46985K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/0/0 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
0 calls to protocol drain routinesI have bind, squid3 and dansguardian on this machine maybe bind is related because somethimes system log shows "not enought resources".
There are this message too:kernel: Approaching the limit on PV entries, consider increasing either the vm.pmap.shpgperproc or the vm.pmap.pv_entry_max sysctl.
vm.pmap.pv_entry_max: 2235258
vm.pmap.shpgperproc: 200Thank you!
-
Aside from the issues you mentioned, that can also be caused by a faulty NIC, cable, switch port, modem, or upstream issue. Anything that leads to it being unable to get the packet out properly.
-
Thank you @jimp, do you believe it is nothing related to kernel? An sysctl configuration perhaps?
Interface output from dmesg:bce0: <broadcom netxtreme="" ii="" bcm5716="" 1000base-t="" (c0)="">mem 0xc0000000-0xc1ffffff irq 16 at device 0.0 on pci1
miibus0: <mii bus="">on bce0
bce0: [ITHREAD]
bce0: ASIC (0x57092008); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Flags (MSI|MFW); MFW (NCSI 2.0.11)</mii></broadcom>I've never faced such problem, could someone lead me to an troubleshooting?
-
If you already increased nmbclusters up that high, it isn't likely to be a kernel/mbuf issue.
Though there could still be some send/recv buffers in the NIC's parameters to tune.
-
You mean net.inet.tcp.sendspace and net.inet.tcp.recvspace sysctls?
-
No, there are ones specific to some NICs, though I can't recall off the top of my head what they are. Either send/recv or rx/tx and some permutation of queue or buffer. Search around a bit and they'll probably turn up (but for different issues than yours)
-
The problem happened again, this time in a virtual machine at home with a machine only as a guest and no service running.
No problem with mbclusters according to netstat-m.
Just something strange I found in the attached screenshot, the process 258 check_reload was cosuming 100% of CPU2, killing him but not solved the problem.
After a while I had a power problem and the machine restarted, the problem disappeared, but restarting does not solve the problem since I had already testing it other times, disabling the network interface does not resolve.
This time is an Intel Pro/1000 "em".
Still no clue of what is happening.
-
Here I am again, just to update, the problem happened again, this time I could track the problem and relate it to pf, when disabled pfctl -d I can ping, enabling again I still can ping but, as soon I enter the WebGUI the problem start again.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better ๐
Register LoginPrivacy Policy · Cookie Policy