Pfsense as openvpn client and wireless network
-
dual wan >> pfsense as openvpn client >> wireless router >> lan pc
Firewall rules
LAN >> 192.168.3.1
TCP * * 127.0.0.1 * *
TCP * * * 443 (HTTPS) OPT1
TCP/UDP * * * 1194 OPT1
TCP/UDP * * * 1723 OPT1
* * * * * wanpool
i dont enabled the advanced outbound NAT my surfing and routing slows drastically i dont know why.
as i configured the firewall as openvpn client:
Routes:
IPv4
Destination Gateway Flags Refs Use Mtu Netif Expire
default 61.9.69.248 UGS 0 131690 1500 rl1
10.16/17 10.16.200.121 UGS 0 0 1500 tun0
10.16.128/18 10.16.200.121 UGS 0 0 1500 tun0
10.16.160/24 10.16.200.121 UGS 0 0 1500 tun0
10.16.200/24 10.16.200.121 UGS 0 0 1500 tun0
10.16.200.121 10.16.200.122 UH 6 0 1500 tun0
10.100.100.10/32 10.16.200.121 UGS 0 0 1500 tun0
10.254/16 10.16.200.121 UGS 0 0 1500 tun0
124.107.72/24 link#2 UC 0 0 1500 rl1
124.107.72.121 00:13:49:2e:46:d0 UHLW 2 145827 1500 rl1 1169
127.0.0.1 127.0.0.1 UH 1 0 16384 lo0
192.168.1 link#3 UC 0 0 1500 dc0
192.168.1.101 127.0.0.1 UGHS 0 0 16384 lo0
192.168.1.254 00:04:ed:24:fa:e4 UHLW 1 4756 1500 dc0 1164
192.168.3 link#1 UC 0 0 1500 rl0
192.168.3.199 00:14:bf:37:1c:d8 UHLW 1 25979147 1500 rl0 1193Wireless router
Automatic Configuration - DHCP
IP Address: 192.168.3.199
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.3.1
DNS 1: 203.127.225.10
DNS 2: 203.167.102.2
DNS 3: 192.168.3.1how can i apply the routing 10.16.0.0/16 to the lan pc to access vpn?
Thanks and God bless!