CP static routes

[brcisna]

Hello All,

pfSense-2.0.1-RELEASE
multiwan load balancing, failover
squid squidGuard
lightsquid

I posted this a couple weeks ago and no response,so trying once again.
Running two pfSense machines at two different locations.
After enabling CP on macine #1 with only one subnet CP workls like a champ.
On macine #2 with 3 static routes down to one nic,CP, (with no authentication) appears to authenticate but no browsing occurs.
(In the portal log i do see "concurent login,,,…) so Im sure it is in fact allowing the user to proceed.
You are simply seeing the CP login box after click "Continue".
From what I have read on this it appears 2.0.2 version has a known problem,but I never find anything in regards to this problem in 2.0.1?.
This ia about  a 2 year install and I am very reluctant to do the 2.0.3 upgrade as I m afraid something with end up quircky after the upgrade but if this is a for sure fix for the static route CP problem,I'll do it.

Thank You,
Barry

[brcisna]

Hello All,

Replying to my own post. After looking at the CP log I did see an error being thrown in regards to "unable to determine mac filter". The error did suppest to "Disable mac filtering in the pfSense GUI,which I did. CP works fine after making this change.

Thank You,
Barry