Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    EMP-8602 400mw 802.11a/g/b wireless mini-pci - driver

    Scheduled Pinned Locked Moved
    Wireless
    5
    28
    17.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • L
      lsf
      last edited by

      It might be a detection issue, do you know what chip this card is based on ?

      The freebsd ath driver might support the card, it might just be a detection issue as you say, i'll look into it and see if i can find out what this card is based on. Can you do me a favour and show me the output of pciconf -lv and dmesg ?

      You might want to take a look at: http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/dev/ath/ah_devid.h

      #define ATHEROS_VENDOR_ID 0x168c /* Atheros PCI vendor ID /
      /

      • NB: all Atheros-based devices should have a PCI vendor ID
        *     of 0x168c, but some vendors, in their infinite wisdom
        *     do not follow this so we must handle them specially.
        */

      -lsf

      1 Reply Last reply Reply Quote 0
      • P
        pcatiprodotnet
        last edited by

        do you know what chip this card is based on ?
        Atheros AR5006.
        I will try those commands tomorrow and post the output.
        Thanks,-pc

        1 Reply Last reply Reply Quote 0
        • P
          pcatiprodotnet
          last edited by

          below

          1 Reply Last reply Reply Quote 0
          • P
            pcatiprodotnet
            last edited by

            Hardware: WRAP 2C
            Software: pfSense-Embedded-1.0BETA2.img.gz
            Wireless: Mfg: EnGenius, Model: EMP-8602 Chipset: Atheros AR5006 6th generation chipset http://www.atheros.com/pt/AR5006Bulletins.htm

            Here is the Output from those commands…

            pciconf -lv

            hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00011078 rev=0x00 hdr=0x00
                class    = bridge
                subclass = HOST-PCI
            none0@pci0:13:0: class=0x020000 card=0x00000000 chip=0xff16168c rev=0x01 hdr=0x00
                class    = network
                subclass = ethernet
            none1@pci0:13:1: class=0x070002 card=0xee96168c chip=0xff96168c rev=0x01 hdr=0x00
                class    = simple comms
                subclass = UART
            none2@pci0:13:2: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none3@pci0:13:3: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none4@pci0:13:4: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none5@pci0:13:5: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none6@pci0:13:6: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none7@pci0:13:7: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            sis0@pci0:14:0: class=0x020000 card=0x0020100b chip=0x0020100b rev=0x00 hdr=0x00
                class    = network
                subclass = ethernet
            none8@pci0:17:0: class=0x020000 card=0x00000000 chip=0xff16168c rev=0x01 hdr=0x00
                class    = network
                subclass = ethernet
            none9@pci0:17:1: class=0x070002 card=0xee96168c chip=0xff96168c rev=0x01 hdr=0x00
                class    = simple comms
                subclass = UART
            none10@pci0:17:2: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none11@pci0:17:3: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none12@pci0:17:4: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none13@pci0:17:5: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none14@pci0:17:6: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            none15@pci0:17:7: class=0x000000 card=0x00000000 chip=0x00000000 rev=0x00 hdr=0x00
                class    = old
                subclass = non-VGA display device
            isab0@pci0:18:0: class=0x060100 card=0x0500100b chip=0x0510100b rev=0x00 hdr=0x00
                class    = bridge
                subclass = PCI-ISA
            none16@pci0:18:1: class=0x068000 card=0x0501100b chip=0x0511100b rev=0x00 hdr=0x00
                class    = bridge
            atapci0@pci0:18:2: class=0x010180 card=0x0502100b chip=0x0502100b rev=0x01 hdr=0x00
                class    = mass storage
                subclass = ATA
            none17@pci0:18:3: class=0x040100 card=0x0503100b chip=0x0503100b rev=0x00 hdr=0x00
                class    = multimedia
                subclass = audio
            none18@pci0:18:5: class=0x068000 card=0x0505100b chip=0x0515100b rev=0x00 hdr=0x00
                class    = bridge

            dmesg

            Copyright (c) 1992-2006 The FreeBSD Project.
            Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
            FreeBSD 6.1-PRERELEASE #0: Thu Mar  2 22:07:36 UTC 2006
                sullrich@builder.livebsd.com:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6
            Timecounter "i8254" frequency 1193182 Hz quality 0
            CPU: Geode(TM) Integrated Processor by National Semi (266.66-MHz 586-class CPU)
              Origin = "Geode by NSC"  Id = 0x540  Stepping = 0
              Features=0x808131 <fpu,tsc,msr,cx8,cmov,mmx>real memory  = 134217728 (128 MB)
            avail memory = 121913344 (116 MB)
            wlan: mac acl policy registered
            ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
            npx0: [FAST]
            npx0: <math processor="">on motherboard</math>
            npx0: INT 16 interface
            cpu0 on motherboard
            pcib0: <host to="" pci="" bridge="">pcibus 0 on motherboard
            pci0: <pci bus="">on pcib0
            pci0: <network, ethernet="">at device 13.0 (no driver attached)
            pci0: <simple comms,="" uart="">at device 13.1 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 13.2 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 13.3 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 13.4 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 13.5 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 13.6 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 13.7 (no driver attached)
            sis0: <natsemi 10="" dp8381[56]="" 100basetx="">port 0x1400-0x14ff mem 0x80080000-0x80080fff irq 10 at device 14.0 on pci0
            sis0: Silicon Revision: DP83816A
            miibus0: <mii bus="">on sis0
            ukphy0: <generic ieee="" 802.3u="" media="" interface="">on miibus0
            ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
            sis0: Ethernet address: 00:0d:b9:03:13:30
            pci0: <network, ethernet="">at device 17.0 (no driver attached)
            pci0: <simple comms,="" uart="">at device 17.1 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 17.2 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 17.3 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 17.4 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 17.5 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 17.6 (no driver attached)
            pci0: <old, non-vga="" display="" device="">at device 17.7 (no driver attached)
            Geode GPIO@ = f400
            Geode PC Engines WRAP.2B/2C v1.09 tinyBIOS V1.4a (C)1997-2005
            isab0: <pci-isa bridge="">port 0xf400-0xf43f,0xf600-0xf63f at device 18.0 on pci0
            isa0: <isa bus="">on isab0
            pci0: <bridge>at device 18.1 (no driver attached)
            atapci0: <national geode="" sc1100="" ata33="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 18.2 on pci0
            ata0: <ata 0="" channel="">on atapci0
            ata1: <ata 1="" channel="">on atapci0
            pci0: <multimedia, audio="">at device 18.3 (no driver attached)
            Geode CBA@ 0x9000
            Geode rev: 06 03
            Timecounter "Geode" frequency 27000000 Hz quality 1000
            pci0: <bridge>at device 18.5 (no driver attached)
            pmtimer0 on isa0
            orm0: <isa option="" rom="">at iomem 0xe0000-0xe7fff on isa0
            ppc0: parallel port not found.
            sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
            sio0: type 16550A, console
            sio1: configured irq 3 not in bitmap of probed irqs 0
            sio1: port may not be enabled
            RTC BIOS diagnostic error 80 <clock_battery>Timecounters tick every 10.000 msec
            Fast IPsec: Initialized Security Association Processing.
            ad0: 122MB <sandisk sdcfj-128="" hdx="" 2.33="">at ata0-master PIO4
            GEOM_LABEL: Label for provider ad0a is ufs/pfSense.
            GEOM_LABEL: Label for provider ad0d is ufs/pfSenseCfg.
            Trying to mount root from ufs:/dev/ufs/pfSense
            sis0: link state changed to UP
            pflog0: promiscuous mode enabled
            #</sandisk></clock_battery></isa></bridge></multimedia,></ata></ata></national></bridge></isa></pci-isa></old,></old,></old,></old,></old,></old,></simple></network,></generic></mii></natsemi></old,></old,></old,></old,></old,></old,></simple></network,></pci></host></fpu,tsc,msr,cx8,cmov,mmx>

            1 Reply Last reply Reply Quote 0
            • L
              lsf
              last edited by

              The chipid is not detected. it's not in the list. http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/contrib/dev/ath/ah_devid.h
              Post your pciconf -lv info on the freebsdmobile mailing list and let Sam add the deviceID.
              Also give the relevant info on the card I have a feeling that the AR5413 might not be supported by the 0.9.16.16 HAL.

              I'll try to write a patch for this to be detected, but I'm not sure it will work. So you should ask Sam Leffler on the freebsdmobile list.

              -lsf

              1 Reply Last reply Reply Quote 0
              • L
                lsf
                last edited by

                I have spent some time researching this now. And as far as i can tell this has to be added by Sam Leffler.
                Neither the madwifi drivers or the freebsd driver seem to have this deviceID.

                Mail the freebsdmobile mailing list, that is the best advice i can give you.

                -lsf

                1 Reply Last reply Reply Quote 0
                • P
                  pcatiprodotnet
                  last edited by

                  Thank you for the help and suggestions.
                  So far I have been unable to find where to join and submit to the "freebsdmobile" mailing list.

                  1 Reply Last reply Reply Quote 0
                  • L
                    lsf
                    last edited by

                    http://lists.freebsd.org/mailman/listinfo/freebsd-mobile

                    -lsf

                    1 Reply Last reply Reply Quote 0
                    • P
                      pcatiprodotnet
                      last edited by

                      I submitted the information to the mailing list…

                      http://lists.freebsd.org/pipermail/freebsd-mobile/2006-March/008099.html

                      Thank you lsf, -pc

                      1 Reply Last reply Reply Quote 0
                      • P
                        pcatiprodotnet
                        last edited by

                        Sam wrote:
                        Did you ask the vendor if the eeprom were misprogrammed?  As far as I
                        can tell the pci device id is chip=0xff16168c which has the correct
                        vendor id (168c) but nonsense for a device id (ff16).  In general
                        Atheros uses device id's with 0's in the upper nibble and f's only for
                        pre-production parts that are never used in retail products.

                        Is there any way for me to alter my Device Id"?
                        Could the driver be altered to recognize my Device Id?
                        If not, I may need to send one of these to Sam…

                        I've ordered another EMP-8602 from a different vendor for comparison testing.
                        -pc

                        1 Reply Last reply Reply Quote 0
                        • S
                          sullrich
                          last edited by

                          @pcatiprodotnet:

                          Sam wrote:
                          Did you ask the vendor if the eeprom were misprogrammed?  As far as I
                          can tell the pci device id is chip=0xff16168c which has the correct
                          vendor id (168c) but nonsense for a device id (ff16).  In general
                          Atheros uses device id's with 0's in the upper nibble and f's only for
                          pre-production parts that are never used in retail products.

                          Sounds like hardware issues.  Call the manufacturer is about all we can say at this point.

                          1 Reply Last reply Reply Quote 0
                          • P
                            pcatiprodotnet
                            last edited by

                            I have a feeling the vendor wouldn't care since they don't officially support freebsd.
                            I'll try and find a flash bios upgrade for this card (EnGenius Senao EMP-8602)…
                            Thank you,-Pete

                            1 Reply Last reply Reply Quote 0
                            • S
                              squarepusher
                              last edited by

                              There's an utility called ar5k, people use it to change the regdomain and countrycode, but I have seen som sites where people use it to change the deviceid.
                              So do a search on google for ar5k.c and be aware that you might ruin your card.

                              1 Reply Last reply Reply Quote 0
                              • P
                                pcatiprodotnet
                                last edited by

                                I received another suggestion…

                                [this is also suggested by above by lsf, but I must have missed it;
                                I usually skip quoted/reply text because it's usually repeat info
                                from an earlier post in the same thread.]

                                "Its possible that the PCI reset timing is causing this issue.
                                …
                                Be aware that PC Engines recently released an update to the BIOS for 
                                its WRAP boards.  From the release notes:
                                -    WRAP BIOS revision history:
                                -    ; v1.11
                                -    ; pd 051108 extend insufficient PCI reset pulse width - caused
                                -    ;          problems with Atheros single chip cards.
                                The 8602 cards are (indeed) based on a single-chip Atheros part. "

                                Will try flashing the WRAP BIOS monday and report...
                                Thanks,-pc

                                1 Reply Last reply Reply Quote 0
                                • L
                                  lsf
                                  last edited by

                                  Heh, I already mentioned the wrap firmware issue in the 5th post in this thread.
                                  http://forum.pfsense.org/index.php?topic=676.msg5200#msg5200

                                  I hope you already did upgrade to the newest bios rev.

                                  -lsf

                                  1 Reply Last reply Reply Quote 0
                                  • L
                                    lsf
                                    last edited by

                                    Any news ? was the wrap firmware the issue ?

                                    -lsf

                                    1 Reply Last reply Reply Quote 0
                                    • P
                                      pcatiprodotnet
                                      last edited by

                                      I haven't yet been able to allocate a few free hours to discover how to flash the WRAP.
                                      It may have to wait until next week.  I ordered two new WRAP.2C units, hopefully with
                                      the latest bios, and two new EMP-8602.  They should be arriving soon; will post results.
                                      Thank you,-pc

                                      1 Reply Last reply Reply Quote 0
                                      • H
                                        hoba
                                        last edited by

                                        from http://pcengines.ch/wrap1c.pdf :

                                        (9) 9600 baud 3 38400 baud
                                        (C) CHS mode L LBA mode
                                        (X) Xmodem upload (Q) Quit

                                        […]

                                        • XMODEM upload of new firmware (X). Start transmission when prompted. 128 byte and 1024
                                          byte packet sizes can be accepted, CRC mode only. Checksum mode is not supported as it is
                                          considered too risky for firmware upgrade.
                                          The actual flash update algorithm is included in the uploaded file. Flash programming takes
                                          about two seconds. If power fails during this time, the BIOS chip will need to be
                                          reprogrammed through other means.
                                        1 Reply Last reply Reply Quote 0
                                        • P
                                          pcatiprodotnet
                                          last edited by

                                          I upgraded to wrap bios 1.11: "PC Engines WRAP.2B/2C v1.11".
                                          I purchased two additional EMP-8602 mini-pci cards that do Not have "ff" in the device id.

                                          Using the latest pfSense versions 04-02-2006 and 04-03-2006, both
                                          old and new cards are NOT detected.
                                          However, after "downgrading" to pfSense 03-27-2006 they both ARE detected!

                                          Here is the output from "pciconf -lv" and "dmesg" when using pfSense 04-02-2006:

                                          pciconf -lv

                                          hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x00011078 rev=0x00 hdr=0x00
                                              class    = bridge
                                              subclass = HOST-PCI
                                          none0@pci0:13:0: class=0x020000 card=0x2063168c chip=0x001b168c rev=0x01 hdr=0x00
                                              class    = network
                                              subclass = ethernet
                                          sis0@pci0:14:0: class=0x020000 card=0x0020100b chip=0x0020100b rev=0x00 hdr=0x00
                                              class    = network
                                              subclass = ethernet
                                          none1@pci0:17:0: class=0x020000 card=0x2063168c chip=0x001b168c rev=0x01 hdr=0x00
                                              class    = network
                                              subclass = ethernet
                                          isab0@pci0:18:0: class=0x060100 card=0x0500100b chip=0x0510100b rev=0x00 hdr=0x00
                                              class    = bridge
                                              subclass = PCI-ISA
                                          none2@pci0:18:1: class=0x068000 card=0x0501100b chip=0x0511100b rev=0x00 hdr=0x00
                                              class    = bridge
                                          atapci0@pci0:18:2: class=0x010180 card=0x0502100b chip=0x0502100b rev=0x01 hdr=0x00
                                              class    = mass storage
                                              subclass = ATA
                                          none3@pci0:18:3: class=0x040100 card=0x0503100b chip=0x0503100b rev=0x00 hdr=0x00
                                              class    = multimedia
                                              subclass = audio
                                          none4@pci0:18:5: class=0x068000 card=0x0505100b chip=0x0515100b rev=0x00 hdr=0x00
                                              class    = bridge

                                          dmesg

                                          Copyright © 1992-2005 The FreeBSD Project.
                                          Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
                                          The Regents of the University of California. All rights reserved.
                                          FreeBSD 6.0-RELEASE-p6 #0: Sun Apr  2 22:26:42 UTC 2006
                                              sullrich@builder.livebsd.com:/usr/obj.pfSense/usr/src/sys/pfSense_wrap.6
                                          Timecounter "i8254" frequency 1193182 Hz quality 0
                                          CPU: Geode(TM) Integrated Processor by National Semi (266.69-MHz 586-class CPU)
                                            Origin = "Geode by NSC"  Id = 0x540  Stepping = 0
                                            Features=0x808131 <fpu,tsc,msr,cx8,cmov,mmx>real memory  = 134217728 (128 MB)
                                          avail memory = 121917440 (116 MB)
                                          wlan: mac acl policy registered
                                          ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
                                          npx0: [FAST]
                                          npx0: <math processor="">on motherboard</math>
                                          npx0: INT 16 interface
                                          cpu0 on motherboard
                                          pcib0: <host to="" pci="" bridge="">pcibus 0 on motherboard
                                          pci0: <pci bus="">on pcib0
                                          pci0: <network, ethernet="">at device 13.0 (no driver attached)
                                          sis0: <natsemi 10="" dp8381[56]="" 100basetx="">port 0x1000-0x10ff mem 0x80040000-0x80040fff irq 10 at device 14.0 on pci0
                                          sis0: Silicon Revision: DP83816A
                                          miibus0: <mii bus="">on sis0
                                          ukphy0: <generic ieee="" 802.3u="" media="" interface="">on miibus0
                                          ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
                                          sis0: Ethernet address: 00:0d:b9:03:8c:c4
                                          pci0: <network, ethernet="">at device 17.0 (no driver attached)
                                          Geode GPIO@ = f400
                                          Geode PC Engines WRAP.2B/2C v1.11 tinyBIOS V1.4a (C)1997-2005
                                          isab0: <pci-isa bridge="">port 0xf400-0xf43f,0xf600-0xf63f at device 18.0 on pci0
                                          isa0: <isa bus="">on isab0
                                          pci0: <bridge>at device 18.1 (no driver attached)
                                          atapci0: <national geode="" sc1100="" ata33="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 18.2 on pci0
                                          ata0: <ata 0="" channel="">on atapci0
                                          ata1: <ata 1="" channel="">on atapci0
                                          pci0: <multimedia, audio="">at device 18.3 (no driver attached)
                                          Geode CBA@ 0x9000
                                          Geode rev: 06 03
                                          Timecounter "Geode" frequency 27000000 Hz quality 1000
                                          pci0: <bridge>at device 18.5 (no driver attached)
                                          pmtimer0 on isa0
                                          orm0: <isa option="" rom="">at iomem 0xe0000-0xe7fff on isa0
                                          ppc0: parallel port not found.
                                          sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
                                          sio0: type 16550A, console
                                          sio1: configured irq 3 not in bitmap of probed irqs 0
                                          sio1: port may not be enabled
                                          Timecounters tick every 10.000 msec
                                          Fast IPsec: Initialized Security Association Processing.
                                          ad0: FAILURE - SETFEATURES SET TRANSFER MODE status=51 <ready,dsc,error>error=4 <aborted>ad0: 122MB <hitachi xx.v.3.7.0.0="" rev="" 0.00="">at ata0-master BIOSPIO
                                          GEOM_LABEL: Label for provider ad0a is ufs/pfSense.
                                          GEOM_LABEL: Label for provider ad0d is ufs/pfSenseCfg.
                                          Trying to mount root from ufs:/dev/ufs/pfSense
                                          sis0: link state changed to DOWN
                                          pflog0: promiscuous mode enabled

                                          Thank you,
                                          -Pete</hitachi></aborted></ready,dsc,error></isa></bridge></multimedia,></ata></ata></national></bridge></isa></pci-isa></network,></generic></mii></natsemi></network,></pci></host></fpu,tsc,msr,cx8,cmov,mmx>

                                          1 Reply Last reply Reply Quote 0
                                          • P
                                            pcatiprodotnet
                                            last edited by

                                            fyi:
                                            EMP-8602 is detected and functioning again in the 04-06-06 pfSense snapshot…
                                            http://www.pfsense.com/~sullrich/RELENG_1_SNAPSHOT_04-06-2006/pfSense.img.gz

                                            Thanks,
                                            -Pete

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post