OLSR mesh GUI $400 {awarded}
-
If it allows me to edit olsr.conf without causing any problems for you, me or other users using the olsr gui… seems good to me. I don't know if I realize all the effects that code will have. Will we be able to edit the file then make changes in the olsr gui without undoing our manual edits?
-
If it allows me to edit olsr.conf without causing any problems for you, me or other users using the olsr gui… seems good to me. I don't know if I realize all the effects that code will have. Will we be able to edit the file then make changes in the olsr gui without undoing our manual edits?
You can simply copy /var/etc/olsrd.conf /root/ after making changes to pfSense, then edit the file in /root/ to add or change those settings.
I am uploading a test embedded image to: http://www.pfsense.com/~sullrich/0/pfSense-pc.img.gz
It will be uploaded 10 minutes from the posting of this message.
-
17. Setting the DHCP Netmask caused DHCP not to start. After selecting a Netmask and clicking [Save], the next page showed two Netmask fields:
On the GUI…
Subnet 10.128.0.0
Subnet mask 255.248.0.0
Available range 10.128.0.0 - 10.135.255.255
Subnet Mask [24]
Range [10.130.1.10] to [10.130.1.254]From the logs…
May 17 06:16:13 dhcpd: /var/dhcpd/etc/dhcpd.conf line 9: too few numbers.
May 17 06:16:13 dhcpd: /var/dhcpd/etc/dhcpd.conf line 9: too few numbers.
May 17 06:16:13 dhcpd: subnet 10.128.0.0 netmask 24 {
May 17 06:16:13 dhcpd: subnet 10.128.0.0 netmask 24 {
May 17 06:16:13 dhcpd: ^
May 17 06:16:13 dhcpd: ^
May 17 06:16:13 dhcpd: Configuration file errors encountered -- exiting
May 17 06:16:13 dhcpd: Configuration file errors encountered -- exiting16. I tried setting "Announce Dynamic Local Route" to both "10.130.1.0 255.255.255.0" and "10.130.1.0/255.255.255.0", but OLSR failed to start with either setting. I tried looking in /var/etc/olsr.conf but I didn't see the values anywhere.
-
17. Setting the DHCP Netmask caused DHCP not to start. After selecting a Netmask and clicking [Save], the next page showed two Netmask fields:
On the GUI…
Subnet 10.128.0.0
Subnet mask 255.248.0.0
Available range 10.128.0.0 - 10.135.255.255
Subnet Mask [24]
Range [10.130.1.10] to [10.130.1.254]From the logs…
May 17 06:16:13 dhcpd: /var/dhcpd/etc/dhcpd.conf line 9: too few numbers.
May 17 06:16:13 dhcpd: /var/dhcpd/etc/dhcpd.conf line 9: too few numbers.
May 17 06:16:13 dhcpd: subnet 10.128.0.0 netmask 24 {
May 17 06:16:13 dhcpd: subnet 10.128.0.0 netmask 24 {
May 17 06:16:13 dhcpd: ^
May 17 06:16:13 dhcpd: ^
May 17 06:16:13 dhcpd: Configuration file errors encountered -- exiting
May 17 06:16:13 dhcpd: Configuration file errors encountered -- exitingOk, that should be fixed.
16. I tried setting "Announce Dynamic Local Route" to both "10.130.1.0 255.255.255.0" and "10.130.1.0/255.255.255.0", but OLSR failed to start with either setting. I tried looking in /var/etc/olsr.conf but I didn't see the values anywhere.
Are you sure? It should be in there if it suddenly doesn't start.
-
Very sure. I've tried it and looked in /var/etc/olsr.conf more than five times now just to be sure. I tried these combinations "10.130.1.0/255.255.255.0", "10.130.1.0 255.255.255.0", "10.130.1.0 / 255.255.255.0", "10.130.1.0/24" many times each with no start. One odd thing, I tried setting it to just "10.130.1.0" and also "10.130.1.0 / 24" and the service started, however there is still no sign of "10.130.1.0" in /var/etc/olsr.conf … perhaps this file isn't getting updated? As a side note, I did notice that the "Announce [self as] Dynamic Gateway" (from issue#10) is properly adding and removing the "0.0.0.0 0.0.0.0" entry from olsr.conf. (other than sometimes leaving Hna4 {} empty, see post below)
-
olsr doesn't start when "Announce self as Dynamic Gateway" is Unchecked; perhaps it doesn't like the empty Hna4 { } section as below, so I guess this Hna4{ } section should be absent from the config (or auto-commented out) when ( "Announce [self as] Dynamic Gateway" unchecked AND "Announce Dynamic Local Route" is empty ):
Hna4
{}
It may be more consistant with other forms to change this entry field to two fields with drop-down on the second like:
"Announce Dynamic Local Route IP: [10.130.1.0] / [24]"
Thank you,
-Pete -
olsr doesn't start when "Announce self as Dynamic Gateway" is Unchecked; perhaps it doesn't like the empty Hna4 { } section as below, so I guess this Hna4{ } section should be absent from the config (or auto-commented out) when ( "Announce [self as] Dynamic Gateway" unchecked AND "Announce Dynamic Local Route" is empty ):
Hna4
{}
Done.
It may be more consistant with other forms to change this entry field to two fields with drop-down on the second like:
"Announce Dynamic Local Route IP: [10.130.1.0] / [24]"
Thank you,
-PeteHrm. I'll look into it.
-
17. DHCP is Not functioning when I choose smaller subnet mask in the drop-down box; Right now, it only works when I chose a large enough subnet to encompass both the interface subnet AND my chosen dhcp range:
My Interface IP address & netmask: 10.130.1.1 / 13
DHCP GUI:
Subnet 10.128.0.0
Subnet mask 255.248.0.0
Available range 10.128.0.0 - 10.135.255.255
Subnet Mask [24] <– I entered this.
Range [10.130.1.10] to [10.130.1.254] <– I entered these.I tried to change the subnet mask drop down box to "24" but it failed to serve dhcp and I got the following error lines in the system log {below}. 10.130.1/24 is within the "Available Range" of 10.128/13 (10.128.0.0 - 10.135.255.255), but the logs indicate that DHCP server's validation routine thinks it's available address range to serve should be limited to 10.128/24 when the Netmask is set to [24] … It appears that the DHCP server's validation checking is incorrectly applying the custom Netmask (/24) to the "Available Range" (10.128) instead of correctly validating against either the entered "Range" (10.130) OR interface IP/netmask.
System Logs...
May 18 06:44:15 dhcpd: Address range 10.130.1.10 to 10.130.1.254 not on net 10.128.0.0/255.255.255.0!
May 18 06:44:15 dhcpd: Address range 10.130.1.10 to 10.130.1.254 not on net 10.128.0.0/255.255.255.0!Since I want to set up each olsr node to serve different class-c (/24) range within the common interface range of 10.128/13, I can't be limited to only the first class-c 10.128.0.0/255.255.255.0 within the 10.128/13 range. I've never configured a DHCP server so I'm unsure what setting changes to suggest; perhaps "Subnet" field could be made changable from the default of "10.128.0.0" to either the first "Range" value "10.130.1.10" OR the interface IP/netmask OR allow me to manually enter it? If you run out of ideas, I wonder if there is there a way to simply tell the dhcp server Not to do it's Netmask validation checking, and just push my desired settings out "as is" to the dhcp client.
update: In another forum discussion, it was determined that it may not be possible to change the first two dhcp values "Subnet: 10.128.0.0" & "Subnet mask: 255.248.0.0" (which are also the actual interface subnet & subnet mask) in dhcp.conf, not even to subset values such as: "10.130.1.0/255.255.255.0". If you verify this as true, perhaps I could get around this problem by turning on pfSense DHCP Forwarding and serving the DHCP from another more flexible system; and also if true, could you verify that pfSense gui permits me to enable dhcp forwarding to the WAN interface? Thanks, -Pete
-
10. When I enable "Announce self as Dynamic Gateway" it adds the "0.0.0.0 0.0.0.0" to the olsr.conf file but it fails to put Hna4 and braces around it as below:
Hna4
{
0.0.0.0 0.0.0.0
}Basically, here's how the olsr.conf Hna4{} entrys should look based on all possible combinations of settings:
IF ("Announce self as Dynamic Gateway"=TRUE) AND ("Announce Dynamic local route"=EMPTY)
THEN the following Hna4{} entry in olsr.conf should look like this :
Hna4
{
0.0.0.0 0.0.0.0
}IF ("Announce self as Dynamic Gateway"=TRUE) AND ("Announce Dynamic local route"=NOT-EMPTY: user enters "10.130.1.0 255.255.255.0")
THEN the following Hna4{} entry in olsr.conf should look like this :
Hna4
{
0.0.0.0 0.0.0.0
10.130.1.0 255.255.255.0
}IF ("Announce self as Dynamic Gateway"=FALSE) AND ("Announce Dynamic local route"=NOT-EMPTY: user enters "10.130.1.0 255.255.255.0")
THEN the following Hna4{} entry in olsr.conf should look like this :
Hna4
{
10.130.1.0 255.255.255.0
}IF ("Announce self as Dynamic Gateway"=FALSE) AND ("Announce Dynamic local route"=EMPTY)
THEN remove or comment out all mention of Hna4 { … } and anything existing between the braces in olsrd.conf :
#Hna4
#{#}
As for not leaving an empty Hna4{} entry in the file, I'm only guessing it was causing olsr not to start; so it could have been some other undiscovered change made by the gui that actually caused the start failure.
-
It may be more consistant with other forms to change this entry field to two fields with drop-down on the second like:
"Announce Dynamic Local Route IP: [10.130.1.0] / [24]"
[then translate the /24 into #.#.#.# before inserting into the config]" Hrm. I'll look into it. "
Thank you for considering it, althought I know what to enter in that field, i'm sure this would be somewhat less confusing for first time users.
-Pete -
Ill get this stuff fixed up later today or this weekend.
-
" Ill get this stuff fixed up later today or this weekend. "
Thank you. I'll check back for updates periodically then download and test. Thanks, -Pete
-
Sorry I havent created an image for this yet. We've been working on some stuff all weekend. I'll get you one as soon as possible, most likely in the next 5 hours.
-
" I'll get you one as soon as possible, most likely in the next 5 hours. "
Thanks Scott. Please email me when you're done. -
It seems that the DHCP server on WAN isn't functioning, even with the correct interface ip/subnet/mask setting. However, when I have LAN set up to do wireless the DHCP functions. I'm using pfsense-pc; I am fairly certain that dhcp on Wan was functioning in beta4, although I don't think you had the code in yet allowing me to (attempt to) modify the subnet.
-
It seems that the DHCP server on WAN isn't functioning, even with the correct interface ip/subnet/mask setting. However, when I have LAN set up to do wireless the DHCP functions. I'm using pfsense-pc; I am fairly certain that dhcp on Wan was functioning in beta4, although I don't think you had the code in yet allowing me to (attempt to) modify the subnet.
Try running from a shell:
/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /var/dhcpd/etc/dhcpd.conf $WANINTERFACE
-
Thanks, I'll give that a try tomorrow at work.
We just finished installing a fair number of pfsense olsr nodes today; they're functioning quite well, DHCP & HNA4 aside. I had no trouble on the laptop when I either hardcoded ip/gateway/netmask(custom narrow) of nearest olsr node OR run olsr for windows thus making the laptop another node on the mesh.
-
Thanks, I'll give that a try tomorrow at work.
We just finished installing a fair number of pfsense olsr nodes today; they're functioning quite well, DHCP & HNA4 aside. I had no trouble on the laptop when I either hardcoded ip/gateway/netmask(custom narrow) of nearest olsr node OR run olsr for windows thus making the laptop another node on the mesh.
Awesome!!!
-
Image updated. Please let me know how it works.
-
I'll try this today at work. I noticed that the pfsense-pc.img.gz file now contains a pfsense.ISO whereas it used to contain pfsense.IMG; will that work ok on imbedded CF?
Thanks you, -Pete