Unbound TCP buffer settings not sticky
-
Mark you should pastebin your resolver.log so we can have a look. It should have all the unbound error information.
Bryan, The resolver.log only has a few lines of DnsForwarder outputs in it currently. From what I've seen the SNMP log, already pastebinned, has everything the resolver file had in it. Otherwise, I'll have to get this to you after I try restarting Unbound. This may be after Wagonza updates the package unless it's needed sooner.
-
Could you give us the output of limits
Bryan, were you asking this of me? I tried logging into PfSense with WinScp, no go. Tried logging on as root instead of admin using same password and also no go. Using SCP port 22. Ftp and Tftp didn't help. Finally copy/pasted from SSH session.
Limits reports;
Resource limits (current):
cputime infinity secs
filesize infinity kB
datasize 33554432 kB
stacksize 524288 kB
coredumpsize infinity kB
memoryuse infinity kB
memorylocked infinity kB
maxprocesses 5547
openfiles 11095
sbsize infinity bytes
vmemoryuse infinity kB
pseudo-terminals infinity
swapuse infinity kB -
Mark you should pastebin your resolver.log so we can have a look. It should have all the unbound error information.
Bryan, The resolver.log only has a few lines of DnsForwarder outputs in it currently. From what I've seen the SNMP log, already pastebinned, has everything the resolver file had in it. Otherwise, I'll have to get this to you after I try restarting Unbound. This may be after Wagonza updates the package unless it's needed sooner.
I get stuff like this in my resolver.log after unbound is installed. Looks about the same so I suppose you are right but I was getting parse errors and other things when my service wouldn't start.
Mar 4 22:12:59 unbound: [24172:0] info: service stopped (unbound 1.4.21). Mar 4 22:12:59 unbound: [24172:0] info: server stats for thread 0: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch Mar 4 22:12:59 unbound: [24172:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0 Mar 4 22:16:22 unbound: [44092:0] notice: init module 0: iterator Mar 4 22:16:22 unbound: [44092:0] info: start of service (unbound 1.4.21). Mar 4 22:18:20 unbound: [44092:0] info: service stopped (unbound 1.4.21). Mar 4 22:18:20 unbound: [44092:0] info: server stats for thread 0: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch Mar 4 22:18:20 unbound: [44092:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0 Mar 4 22:18:26 unbound: [88348:0] notice: init module 0: iterator Mar 4 22:18:26 unbound: [88348:0] info: start of service (unbound 1.4.21). Mar 4 22:19:10 unbound: [88348:0] info: service stopped (unbound 1.4.21). Mar 4 22:19:10 unbound: [88348:0] info: server stats for thread 0: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch Mar 4 22:19:10 unbound: [88348:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0 Mar 4 22:19:13 unbound: [12458:0] notice: init module 0: iterator Mar 4 22:19:13 unbound: [12458:0] info: start of service (unbound 1.4.21). Mar 4 22:19:13 unbound: [12458:0] info: 192.168.55.3 pfsense.localdomain. A IN Mar 4 22:19:13 unbound: [12458:0] info: 192.168.55.3 pfsense.localdomain.dev.localdomain. A IN Mar 4 22:19:17 unbound: [12458:0] info: 192.168.55.3 0.pfsense.pool.ntp.org. AAAA IN Mar 4 22:19:54 unbound: [12458:0] info: service stopped (unbound 1.4.21). Mar 4 22:19:54 unbound: [12458:0] info: server stats for thread 0: 3 queries, 0 answers from cache, 3 recursions, 0 prefetch Mar 4 22:19:54 unbound: [12458:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0 Mar 4 22:19:54 unbound: [12458:0] info: average recursion processing time 0.241851 sec Mar 4 22:19:54 unbound: [12458:0] info: histogram of recursion processing times Mar 4 22:19:54 unbound: [12458:0] info: [25%]=0 median[50%]=0 [75%]=0 Mar 4 22:19:54 unbound: [12458:0] info: lower(secs) upper(secs) recursions Mar 4 22:19:54 unbound: [12458:0] info: 0.065536 0.131072 1 Mar 4 22:19:54 unbound: [12458:0] info: 0.131072 0.262144 1 Mar 4 22:19:54 unbound: [12458:0] info: 0.262144 0.524288 1 Mar 4 22:20:01 unbound: [44628:0] notice: init module 0: iterator Mar 4 22:20:01 unbound: [44628:0] info: start of service (unbound 1.4.21). Mar 4 22:24:02 unbound: [44628:0] info: service stopped (unbound 1.4.21). Mar 4 22:24:02 unbound: [44628:0] info: server stats for thread 0: 0 queries, 0 answers from cache, 0 recursions, 0 prefetch Mar 4 22:24:02 unbound: [44628:0] info: server stats for thread 0: requestlist max 0 avg 0 exceeded 0 jostled 0 Mar 4 22:24:08 unbound: [15496:0] notice: init module 0: iterator Mar 4 22:24:08 unbound: [15496:0] info: start of service (unbound 1.4.21).Could you give us the output of limits
Bryan, were you asking this of me? I tried logging into PfSense with WinScp, no go. Tried logging on as root instead of admin using same password and also no go. Using SCP port 22. Ftp and Tftp didn't help.
Winscp should just work the same as SSH. Just use defaults and root then password.
Finally copy/pasted from SSH session.
Limits reports;
Resource limits (current):
cputime infinity secs
filesize infinity kB
datasize 33554432 kB
stacksize 524288 kB
coredumpsize infinity kB
memoryuse infinity kB
memorylocked infinity kB
maxprocesses 5547
openfiles 11095
sbsize infinity bytes
vmemoryuse infinity kB
pseudo-terminals infinity
swapuse infinity kBYes exactly just ssh in and run the command. As you can see unbound is adjusting your openfiles. What is the output of this
sysctl -a | grep fileI can't reproduce unbound wanting to increase openfiles. Either way it looks like it is normal if it thinks it is going to run out. Are you willing to paste your whole unbound.conf? Guess it is probably not there still?
Can you also give us an full output of:
ps aux -
Yes exactly just ssh in and run the command. As you can see unbound is adjusting your openfiles. What is the output of this
sysctl -a | grep fileI can't reproduce unbound wanting to increase open files. Either way it looks like it is normal if it thinks it is going to run out. Are you willing to paste your whole unbound.conf? Guess it is probably not there still?
Can you also give us an full output of:
ps aux@Bryan
SysCtl
http://pastebin.com/embed_js.php?i=DczvR9EqPsAux
http://pastebin.com/embed_js.php?i=sumekXMa -
I uninstalled/reinstalled the Unbound pkg last night at 9PM PST. Not sure if Wagonza's changes were a part of the pkg download. The PfSense server downloaded ver _21 again. Launched this morning after disabling the forwarder and all seems well except I couldn't log into forum.pfsense.org. I have in the DNS forwarder host overrides;
pfsense.com=66.219.34.171
files.pfsense.org=66.111.2.167If you recall adding hostnames was recommended earlier in this thread as a way to recover Unbound from the PfSense server when Unbound won't start.
So I thought well maybe I need to add;
pfsense.org=192.207.126.26I entered into the forwarder then disabled unbound then enabled the forwarder to populate the changes so Unbound could pick it up from the revised hosts file. Then I reversed the services never having both services enabled at the same time. It's at this time Unbound refused to start again and I had to revert back to the forwarder pointing to another Win box running Unbound.
Is this strike 3?
-
I uninstalled/reinstalled the Unbound pkg last night at 9PM PST. Not sure if Wagonza's changes were a part of the pkg download. The PfSense server downloaded ver _21 again. Launched this morning after disabling the forwarder and all seems well except I couldn't log into forum.pfsense.org. I have in the DNS forwarder host overrides;
pfsense.com=66.219.34.171
files.pfsense.org=66.111.2.167If you recall adding hostnames was recommended earlier in this thread as a way to recover Unbound from the PfSense server when Unbound won't start.
So I thought well maybe I need to add;
pfsense.org=192.207.126.26I entered into the forwarder then disabled unbound then enabled the forwarder to populate the changes so Unbound could pick it up from the revised hosts file. Then I reversed the services never having both services enabled at the same time. It's at this time Unbound refused to start again and I had to revert back to the forwarder pointing to another Win box running Unbound.
Is this strike 3?
Why would you start the forwarder again? There has not be something telling us why unbound is not starting. You gave us zero information. ps aux while trying to start unbound? resolver.log? What does it say when you try to start unbound manually? Are you sure DNS Forwarder is off before trying to restart unbound?
-
As I mentioned, I started the Forwarder again to populate the hosts that Unbound recognizes. Restarting Unbound didn't pick up the host override entered in the Forwarder. The PfSense docs I read said that Unbound gets it's overrides from the Forwarder entries. Once Unbound quit I had to hurriedly get the system back online. No time to collect ps.aux or logs. I'll schedule this again for 4AM instead of 7AM when I can tolerate more downtime and get what you ask for and when I can reboot the router to perhaps clear port 53 in the event a disabled Forwarder doesn't release the port as it should. I underlined so you don't misunderstand that I know this was why Unbound didn't start. I don't know at this time.
I did say this was an online system right? I won't bother posting again unless I can fully document the results.
Sorry for the bother… -
As I mentioned, I started the Forwarder again to populate the hosts that Unbound recognizes. Restarting Unbound didn't pick up the host override entered in the Forwarder.
No such thing needed. Frankly, with all your issues noone's able to reproduce, I'd recommend to flatten and rebuild the box from scratch.
-
As I mentioned, I started the Forwarder again to populate the hosts that Unbound recognizes. Restarting Unbound didn't pick up the host override entered in the Forwarder. The PfSense docs I read said that Unbound gets it's overrides from the Forwarder entries.
You do not need to turn on the DNS Forwarder service to get the host overrides to populate. Unbound reads them from the config.xml everytime you cause the unbound.conf to be generated.
- Add overrides
- Press save & apply changes
- Go to services unbound -> save config and it will regenerate config and restart
- Check unbound status tab to see your host overrides as local data records
I mean maybe wagonza can make it regen config on service restart would seem clearer. It has nothing to do with starting dnsmasq it just it shares the page with DNS Forwarder and is read by unbound. Below what I saw following steps above.
# DNSMasq Host overrides local-data-ptr: "192.168.55.7 test.fudzilla.com" local-data: "test.fudzilla.com IN A 192.168.55.7"Pertinent code: Everything in hosts file has a function here and unbound does it when it generates its conf. no need for dnsmasq to be running.
function read_hosts() { // Open /etc/hosts and extract the only dhcpleases info $etc_hosts = array(); foreach (file('/etc/hosts') as $line) { $d = preg_split('/\s/', $line, -1, PREG_SPLIT_NO_EMPTY); if (empty($d) || substr(reset($d), 0, 1) == "#") continue; if ($d[3] == "#") { $ip = array_shift($d); $fqdn = array_shift($d); $name = array_shift($d); if ($fqdn != "empty") { if ($name != "empty") array_push($etc_hosts, array(ipaddr => "$ip", fqdn => "$fqdn", name => "$name")); else array_push($etc_hosts, array(ipaddr => "$ip", fqdn => "$fqdn")); } } } return $etc_hosts; } /* * Setup /etc/hosts entries by overriding with local-data */ function unbound_add_host_entries() { global $config; /* XXX: break this out into a separate config file and make use of include */ $unboundcfg = $config['installedpackages']['unbound']['config'][0]; $syscfg = $config['system']; $dnsmasqcfg = $config['dnsmasq']; $unbound_entries = "local-zone: \"{$syscfg['domain']}\" transparent\n"; // IPv4 entries $unbound_entries .= "local-data-ptr: \"127.0.0.1 localhost\"\n"; $unbound_entries .= "local-data: \"localhost A 127.0.0.1\"\n"; $unbound_entries .= "local-data: \"localhost.{$syscfg['domain']} A 127.0.0.1\"\n"; // IPv6 entries if(function_exists("is_ipaddrv6")) { $unbound_entries .= "local-data-ptr: \"::1 localhost\"\n"; $unbound_entries .= "local-data: \"localhost AAAA ::1\"\n"; $unbound_entries .= "local-data: \"localhost.{$syscfg['domain']} AAAA ::1\"\n"; } $added_item_v4 = array(); $added_item_v6 = array(); if ($config['interfaces']['lan']) { $current_host = $syscfg['hostname'].".".$syscfg['domain']; $cfgip = get_interface_ip("lan"); if (is_ipaddr($cfgip)) { $unbound_entries .= "local-data-ptr: \"{$cfgip} {$current_host}\"\n"; $unbound_entries .= "local-data: \"{$current_host} A {$cfgip}\"\n"; $unbound_entries .= "local-data: \"{$syscfg['hostname']} A {$cfgip}\"\n"; $added_item_v4[$current_host] = true; } $cfgip6 = get_interface_ipv6("lan"); if (is_ipaddrv6($cfgip6)) { $unbound_entries .= "local-data-ptr: \"{$cfgip6} {$current_host}\"\n"; $unbound_entries .= "local-data: \"{$current_host} AAAA {$cfgip6}\"\n"; $unbound_entries .= "local-data: \"{$syscfg['hostname']} AAAA {$cfgip6}\"\n"; $added_item_v6[$current_host] = true; } } else { $sysiflist = get_configured_interface_list(); foreach ($sysiflist as $sysif) { if (!interface_has_gateway($sysif)) { $current_host = $syscfg['hostname'].".".$syscfg['domain']; $cfgip = get_interface_ip($sysif); if (is_ipaddr($cfgip)) { $unbound_entries .= "local-data-ptr: \"{$cfgip} {$current_host}\"\n"; $unbound_entries .= "local-data: \"{$current_host} A {$cfgip}\"\n"; $unbound_entries .= "local-data: \"{$syscfg['hostname']} A {$cfgip}\"\n"; $added_item_v4[$current_host] = true; } $cfgip6 = get_interface_ipv6($sysif); if (is_ipaddr($cfgip6)) { $unbound_entries .= "local-data-ptr: \"{$cfgip6} {$current_host}\"\n"; $unbound_entries .= "local-data: \"{$current_host} AAAA {$cfgip6}\"\n"; $unbound_entries .= "local-data: \"{$syscfg['hostname']} AAAA {$cfgip6}\"\n"; $added_item_v6[$current_host] = true; } if (is_ipaddr($cfgip) || is_ipaddr($cfgip6)) break; } } } // DNSMasq entries static host entries if (isset($dnsmasqcfg['hosts'])) { $hosts = $dnsmasqcfg['hosts']; $host_entries = "# DNSMasq Host overrides\n"; $added_item = array(); foreach ($hosts as $host) { $current_host = ($host['host'] != "") ? $host['host'].".".$host['domain'] : $host['domain']; if (function_exists("is_ipaddrv6") && is_ipaddrv6($host['ip'])) { if (!$added_item_v6[$current_host]) { $host_entries .= "local-data-ptr: \"{$host['ip']} {$current_host}\"\n"; $host_entries .= "local-data: \"{$current_host} IN AAAA {$host['ip']}\"\n"; $added_item_v6[$current_host] = true; } if ($host['aliases']['item'] && is_array($host['aliases']['item'])) foreach ($host['aliases']['item'] as $alias) { $current_alias = ($alias['host'] != "") ? $alias['host'].".".$alias['domain'] : $alias['domain']; if (!$added_item_v6[$current_alias]) { $host_entries .= "local-data: \"{$current_alias} IN AAAA {$host['ip']}\"\n"; $added_item_v6[$current_alias] = true; if ((!$added_item[$current_alias]) && (!empty($alias['description'])) && ($unboundcfg['txtsupport'] == 'on')) { $host_entries .= "local-data: '{$current_alias} TXT \"".addslashes($alias['description'])."\"'\n"; $added_item[$current_alias] = true; } } } } else { if (!$added_item_v4[$current_host]) { $host_entries .= "local-data-ptr: \"{$host['ip']} {$current_host}\"\n"; $host_entries .= "local-data: \"{$current_host} IN A {$host['ip']}\"\n"; $added_item_v4[$current_host] = true; } if ($host['aliases']['item'] && is_array($host['aliases']['item'])) foreach ($host['aliases']['item'] as $alias) { $current_alias = ($alias['host'] != "") ? $alias['host'].".".$alias['domain'] : $alias['domain']; if (!$added_item_v4[$current_alias]) { $host_entries .= "local-data: \"{$current_alias} IN A {$host['ip']}\"\n"; $added_item_v4[$current_alias] = true; if ((!$added_item[$current_alias]) && (!empty($alias['description'])) && ($unboundcfg['txtsupport'] == 'on')) { $host_entries .= "local-data: '{$current_alias} TXT \"".addslashes($alias['description'])."\"'\n"; $added_item[$current_alias] = true; } } } } if ((!$added_item[$current_host]) && (!empty($host['descr'])) && ($unboundcfg['txtsupport'] == 'on')) { $host_entries .= "local-data: '{$current_host} TXT \"".addslashes($host['descr'])."\"'\n"; $added_item[$current_host] = true; } } $unbound_entries .= $host_entries; } // Static DHCP entries $host_entries = "# DHCP Reservations\n"; if (isset($unboundcfg['regdhcpstatic']) && is_array($config['dhcpd'])) { foreach ($config['dhcpd'] as $dhcpif => $dhcpifconf) if(is_array($dhcpifconf['staticmap']) && isset($dhcpifconf['enable'])) foreach ($dhcpifconf['staticmap'] as $host) if ($host['ipaddr'] && $host['hostname']) { $current_host = $host['hostname'].".".$syscfg['domain']; if (!$added_item_v4[$current_host]) { $host_entries .= "local-data-ptr: \"{$host['ipaddr']} {$current_host}\"\n"; $host_entries .= "local-data: \"{$current_host} IN A {$host['ipaddr']}\"\n"; $added_item_v4[$current_host] = true; if ((!$added_item[$current_host]) && (!empty($host['descr'])) && ($unboundcfg['txtsupport'] == 'on')) { $host_entries .= "local-data: '{$host['hostname']}.{$syscfg['domain']} TXT \"".addslashes($host['descr'])."\"'\n"; $added_item[$current_host] = true; } } } $unbound_entries .= $host_entries; } // Static DHCPv6 entries $host_entries = "# DHCPv6 reservations\n"; if (isset($unboundcfg['regdhcpstatic']) && is_array($config['dhcpdv6'])) { foreach ($config['dhcpdv6'] as $dhcpif => $dhcpifconf) if(is_array($dhcpifconf['staticmap']) && isset($dhcpifconf['enable'])) foreach ($dhcpifconf['staticmap'] as $host) if ($host['ipaddrv6'] && $host['hostname']) { $current_host = $host['hostname'].".".$syscfg['domain']; if (!$added_item_v6[$current_host]) { $host_entries .= "local-data-ptr: \"{$host['ipaddrv6']} {$current_host}\"\n"; $host_entries .= "local-data: \"{$current_host} IN AAAA {$host['ipaddrv6']}\"\n"; $added_item_v6[$current_host] = true; if ((!$added_item[$current_host]) && (!empty($host['descr'])) && ($unboundcfg['txtsupport'] == 'on')) { $host_entries .= "local-data: '{$host['hostname']}.{$syscfg['domain']} TXT \"".addslashes($host['descr'])."\"'\n"; $added_item[$current_host] = true; } } } $unbound_entries .= $host_entries; } // Handle DHCPLeases added host entries $dhcplcfg = read_hosts(); $host_entries = "# /etc/hosts entries\n"; if(is_array($dhcplcfg)) { foreach($dhcplcfg as $key=>$host) { $current_host = $host['fqdn']; if (function_exists("is_ipaddrv6") && is_ipaddrv6($host['ipaddr'])) { if (!$added_item_v6[$current_host]) { $host_entries .= "local-data-ptr: \"{$host['ipaddr']} {$host['fqdn']}\"\n"; $host_entries .= "local-data: \"{$host['fqdn']} IN AAAA {$host['ipaddr']}\"\n"; $added_item_v6[$current_host] = true; if ((!empty($host['name'])) && (!$added_item_v6[$host['name']])) { $host_entries .= "local-data-ptr: \"{$host['ipaddr']} {$host['name']}\"\n"; $host_entries .= "local-data: \"{$host['name']} IN AAAA {$host['ipaddr']}\"\n"; $added_item_v6[$host['name']] = true; } } } else { if (!$added_item_v4[$current_host]) { $host_entries .= "local-data-ptr: \"{$host['ipaddr']} {$host['fqdn']}\"\n"; $host_entries .= "local-data: \"{$host['fqdn']} IN A {$host['ipaddr']}\"\n"; $added_item_v4[$current_host] = true; if ((!empty($host['name'])) && (!$added_item_v4[$host['name']])) { $host_entries .= "local-data-ptr: \"{$host['ipaddr']} {$host['name']}\"\n"; $host_entries .= "local-data: \"{$host['name']} IN A {$host['ipaddr']}\"\n"; $added_item_v4[$host['name']] = true; } } } } $unbound_entries .= $host_entries; } return $unbound_entries; } /* Setup any domain overrides that have been configured with stub-zone parameter */ function unbound_add_domain_overrides($pvt=false) { global $config; if (isset($config['dnsmasq']['domainoverrides'])) { $domains = $config['dnsmasq']['domainoverrides']; // Domain overrides that have multiple entries need multiple stub-addr: added $sorted_domains = msort($domains, "domain"); $result = array(); foreach($sorted_domains as $domain) { $domain_key = current($domain); if (!isset($result[$domain_key])) $result[$domain_key] = array(); $result[$domain_key][] = $domain['ip']; } $domain_entries = ""; foreach($result as $domain=>$ips) { if ($pvt == true) { if (strpos($domain, "in-addr.arpa") !== false) $domain_entries .= "local-zone: \"$domain\" transparent\n"; else $domain_entries .= "private-domain: \"$domain\"\n"; if (isset($config['installedpackages']['unbound']['config'][0]['dnssec_status'])) $domain_entries .= "domain-insecure: \"$domain\"\n"; } else { $domain_entries .= "stub-zone:\n"; $domain_entries .= "\tname: \"$domain\"\n"; foreach($ips as $ip) $domain_entries .= "\tstub-addr: $ip\n"; $domain_entries .= "\tstub-prime: no\n"; } } return $domain_entries; } }Once Unbound quit I had to hurriedly get the system back online. No time to collect ps.aux or logs. I'll schedule this again for 4AM instead of 7AM when I can tolerate more downtime and get what you ask for and when I can reboot the router to perhaps clear port 53 in the event a disabled Forwarder doesn't release the port as it should. I underlined so you don't misunderstand that I know this was why Unbound didn't start. I don't know at this time.
Yes it is probably the reason. I understand circumstances but having a second SSH open or third to launch a couple commands wouldn't hurt in the future as you are the one that needs the information after all ;)
I did say this was an online system right? I won't bother posting again unless I can fully document the results.
Sorry for the bother…I understand production. No hostility meant. It isn't the clearest process or setup in the GUI ever. That is the problem with abstracting things into a GUI sometimes stuff gets meshed together and without looking at code you have no idea what is going on.
No such thing needed. Frankly, with all your issues noone's able to reproduce, I'd recommend to flatten and rebuild the box from scratch.
Don't think there is a need for this. I think it is just a misunderstanding. Think we have about everything covered now. Wagonza has fixed the conf generation clause order problem for custom options and probably this current problem as markn62 has noted that it was probably something to do with DNS Forwarder still running or something.
-
I uninstalled/reinstalled the Unbound pkg last night at 9PM PST. Not sure if Wagonza's changes were a part of the pkg download. The PfSense server downloaded ver _21 again.
Nope not yet.
Launched this morning after disabling the forwarder and all seems well except I couldn't log into forum.pfsense.org. I have in the DNS forwarder host overrides;
pfsense.com=66.219.34.171
files.pfsense.org=66.111.2.167If you recall adding hostnames was recommended earlier in this thread as a way to recover Unbound from the PfSense server when Unbound won't start.
So I thought well maybe I need to add;
pfsense.org=192.207.126.26I entered into the forwarder then disabled unbound then enabled the forwarder to populate the changes so Unbound could pick it up from the revised hosts file. Then I reversed the services never having both services enabled at the same time. It's at this time Unbound refused to start again and I had to revert back to the forwarder pointing to another Win box running Unbound.
Is this strike 3?
You shouldn't need to do any of the above.
-
I mean maybe wagonza can make it regen config on service restart would seem clearer. It has nothing to do with starting dnsmasq it just it shares the page with DNS Forwarder and is
Only gonna happen in pfSense2.2.
-
I mean maybe wagonza can make it regen config on service restart would seem clearer. It has nothing to do with starting dnsmasq it just it shares the page with DNS Forwarder and is
Only gonna happen in pfSense2.2.
:) fair enough as it is getting integrated in.
-
Well I reinstalled unbound again @ 4AM. Ran fine initially so I tried the option command "outgoing-range: 900" and it killed the service. I thought Wagonza put this into the pkg. I removed that and normal function returned.
So I went back to bed until later this morning. Complaints of *.org, *.info and *.co resolution started rolling in around 9AM. Narrowed it down to the incoming/outgoing buffers. When set to zero, .com, .net resolves but the others mentioned above do not. So it appears these two parameters may not be doing what they're suppose to do, or doing more than is apparent in the GUI. Suppose to ignore TCP and only use UDP.
Doesn't make sense to me that with UDP only that DNS resolution would be selective by domain.
-
@markn62 was this problem fixed for you? or is it still an issue?
Not much has changed. Seems that the package operates very much like it did since the question above was asked. The only change I noticed was a few more "do not's" that are important to adhere too for the package to work properly. I guess it is what it is.
-
@markn62 was this problem fixed for you? or is it still an issue?
Not much has changed. Seems that the package operates very much like it did since the question above was asked. The only change I noticed was a few more "do not's" that are important to adhere too for the package to work properly. I guess it is what it is.
I can't reproduce any of your current issues at all with the package even using all your custom options. Something else must be going on or you have something else as an additional problem. Try saving your whole pfsense configuration and loading that config onto a VM ands testing to give us information to go on. Or even for yourself. The devs are replacing dnsmasq with unbound afterall. If you copy your unbound.conf on your seperate box to your pfsense and only restart the service does it work?