PortForward NAT to S2S



  • I currently have a S2S VPN setup through OpenVPN with two pfSense boxes v 2.1.  We will call them site A and B.

    Site A has static WAN IP addresses…
    1.1.1.1
    2.2.2.2
    3.3.3.3

    Site A Internal IP Address...
    10.0.1.XXX

    Site B has DHCP WAN IP Address...
    5.5.5.5

    Site B Internal IP Address...
    10.0.2.XXX

    I am wanting to open ports so that when you go to 2.2.2.2 it will pull up something on a client in the S2S VPN (10.0.2.100).

    I am not able to figure out how to do this.

    I followed the directions on http://forum.pfsense.org/index.php/topic,57970.0.html, but still no go.

    Maybe I am not understanding step 3 and 4 fully, but I have add the VPN as an interface.    Then I went to Firewall/NAT and added a rule...  Anything coming from 2.2.2.2 goes to 10.0.2.100

    Am I missing something?  I have on the VPN interface tab under Firewall/Rules/[VPN Interface] a rule that allows ALL traffic.  Is this not right?

    Hope someone can assist me.