Best Hardware?
-
The two Intel NICs on the the board are different so I guess he is saying that one is less well supported. I've not heard any reports of that though. Please enlighten us Aluminum.
Steve
-
I am still having a hard time finding a better mini itx board so unless he has bad news I will probably still opt for this board. I was also looking at cases like the Euler but In-Win K2 BASIC Thin Mini-ITX is a lot cheaper and has a higher TDP rating (35W TDP CPU is recommended for the Euler even though I've seen reviews of a Pentium G2120 55W in it running fine).
-
The two Intel NICs on the the board are different so I guess he is saying that one is less well supported. I've not heard any reports of that though. Please enlighten us Aluminum.
Steve
The onboards both work fine.
Expansion cards are limited, it does not like various NICs to the point it will not boot (82576/VT) or will do weird things like disable a memory channel (i350). I have not tested everything out there but the only ones I've not had problems with have been 82571 duals and quads. Its not a power problem either, none pull over 25W.
Its purely an UEFI problem but Intel Inc does not care enough to fix it, believe me I tried. (supposed reason: its a "desktop" Q77 board despite supporting obviously server only features like VT-d, ironically their itx "server" C206 board does not)
I'm tempted to look into the asus/gigabyte/etc haswell socket thin itx boards as they may be easier vendors to persuade to fix hardware bios problems, so far none have dual intel but mix in some realcrap. Also until i21x is in pfsense release I'm in no hurry.
Still love to have a full height ITX w/ DC input and no lcd display frills to drive up the price, would be good for various DIY builds not just pfsense. I'd prefer asrock as they often go to the trouble to support xeons (and ecc if possible) in firmware and are known to actually test things like esxi on some of their consumer boards.
-
I can report that this i350-based dual port PCI-E Mini board work well with the DQ77KB.
It's not too expensive and not very hot. It is much easier to install in a crammed Mini-ITX chassis than a normal PCI-E card and you don't need to also buy a riser card/cable.
It is by the way also available in a single port variant, should anyone prefer that.
-
@P3R:
I can report that this i350-based dual port PCI-E Mini board work well with the DQ77KB.
It's not too expensive and not very hot. It is much easier to install in a crammed Mini-ITX chassis than a normal PCI-E card and you don't need to also buy a riser card/cable.
It is by the way also available in a single port variant, should anyone prefer that.
Very nice find. My new motherboard supports two Mini PCI-E slots so this would be perfect if I need to expand more ports. Yes my case is crammed enough as it is..lol but still very compact the way I want it.
-
The two Intel NICs on the the board are different so I guess he is saying that one is less well supported. I've not heard any reports of that though. Please enlighten us Aluminum.
Steve
The onboards both work fine.
Expansion cards are limited, it does not like various NICs to the point it will not boot (82576/VT) or will do weird things like disable a memory channel (i350). I have not tested everything out there but the only ones I've not had problems with have been 82571 duals and quads. Its not a power problem either, none pull over 25W.
Its purely an UEFI problem but Intel Inc does not care enough to fix it, believe me I tried. (supposed reason: its a "desktop" Q77 board despite supporting obviously server only features like VT-d, ironically their itx "server" C206 board does not)
I'm tempted to look into the asus/gigabyte/etc haswell socket thin itx boards as they may be easier vendors to persuade to fix hardware bios problems, so far none have dual intel but mix in some realcrap. Also until i21x is in pfsense release I'm in no hurry.
Still love to have a full height ITX w/ DC input and no lcd display frills to drive up the price, would be good for various DIY builds not just pfsense. I'd prefer asrock as they often go to the trouble to support xeons (and ecc if possible) in firmware and are known to actually test things like esxi on some of their consumer boards.
I wasn't even aware that this board had LCD Display functionality. Good to know though, as well as the post from P3R about the dual port i350 PCI-E Mini board.
-
Please notice though that the Jetway cards mentioned above are full length PCI-E Mini cards. The DQ77KB have one full and one half length PCI-E Mini card slots and several other motherboards only support half length PCI-E Mini cards :'(
-
Welp, just purchased everything.
Intel 530 120 SSD
Intel DQ77KB Mini-ITX
Intel Core i3-3240 Dual-Core Processor 3.4 Ghz 3 MB Cache LGA 1155
Kingston Value RAM 4GB 1600MHz PC3-12800 DDR3 Non-ECC CL11 SODIMM SR x8 Notebook Memory -
You may want to return that 530 SSD and get a S3500, or find an old Intel 320 somewhere.
We don't ship the 530s at Netgate. There are reasons, including the lack of a cap to keep the SSD alive long enough to complete the write to the correct flash sector.
http://lkcl.net/reports/ssd_analysis.html
Now that we have the pfSense store launched, the best hardware for pfSense comes from pfSense itself.
-
The retired 320 series has a very, very good reputation among our customers. Everyone loved that line, and found it very reliable. Hopefully the S3500 line does similarly well as it appears to be doing so far. Power loss issues are as important (and sometimes more important) than overall longevity. It doesn't matter how long the drive lasts if it gets corrupted any time the power fails longer than your UPS does.
An 80GB S3500 is only about $120 on Newegg, a 120GB S3500 is $150. It's not that much more expensive than the 520, and well worth the extra few bucks for the cap and the extra piece of mind.
-
@gonzopancho:
You may want to return that 530 SSD and get a S3500, or find an old Intel 320 somewhere.
We don't ship the 530s at Netgate. There are reasons, including the lack of a cap to keep the SSD alive long enough to complete the write to the correct flash sector.
http://lkcl.net/reports/ssd_analysis.html
Now that we have the pfSense store launched, the best hardware for pfSense comes from pfSense itself
I didn't see this post till now and unfortunately I already have everything up and running :(
-
It's only an issue if you have regular power outages. I'm sure there are many thousands of 530s out there in desktops running without an issue.
Steve
-
It's only an issue if you have regular power outages. I'm sure there are many thousands of 530s out there in desktops running without an issue.
Steve
Thanks for all the help and advice Steve, appreciate it! Here are a couple pics of the build. I really like this In-Win K2 case. System temp is 27C right now, about 19% CPU is my norm with the packages I have installed thus far.
-
It's only an issue if you have regular power outages. I'm sure there are many thousands of 530s out there in desktops running without an issue.
Steve
Both of my main pfSense boxes at work are using Intel 530 SSDs. There's nothing wrong with them as long as ONE of the following is true:
-
You are using a UPS and have your system set to shutdown at low power. (This is true of most non-enterprise SSDs)
-
You don't care about the (tiny) possibility of needing to reinstall your system. (I use CARP + AutoConfigBackup so it's not an issue for me)
-
-
It's only an issue if you have regular power outages. I'm sure there are many thousands of 530s out there in desktops running without an issue.
Steve
Both of my main pfSense boxes at work are using Intel 530 SSDs. There's nothing wrong with them as long as ONE of the following is true:
-
You are using a UPS and have your system set to shutdown at low power. (This is true of most non-enterprise SSDs)
-
You don't care about the (tiny) possibility of needing to reinstall your system. (I use CARP + AutoConfigBackup so it's not an issue for me)
Any UPS you recommend for home use?
-
-
Any UPS you recommend for home use?
I use these, plus the remote monitoring cards. I like them because of the Sine Wave output.
http://www.apc.com/products/resource/include/techspec_index.cfm?base_sku=SMT1500
If you're looking for something cheaper then APC's Back-UPS Pro line is nice.
