Self Inflicted Fail


  • Netgate Administrator

    Hmm, forum went down? Copy and pasted from earlier…..

    So I updated my test box (32bit Nano) as soon as I saw that snapshots were up and it never came back up after rebooting. Possibly I would have done a better job of it had I not been battling to stay awake at 3AM and using a tablet whilst in bed!  ::)
    This morning I hooked up a console cable and immediately saw what had happened. I don't think any of these things are 2.1.1 specific but maybe worth noting them here.

    The box was waiting at the assign interfaces dialogue. That was because it had previously had a USB wifi device attached and although I had disabled the interface it was still assigned. It seems like there should be an option to remove the offending interface here because the only way I got past that was to re-attach the USB NIC, once I'd retrieved it from the pile of stuff it ended up beneath.

    After successfully rebooting and reconfiguring my interfaces I had some error in the logs. Most concernin of which was this:

    php: rc.bootup: The command '/usr/local/sbin/dhcpd -user dhcpd -group _dhcp -chroot /var/dhcpd -cf /etc/dhcpd.conf -pf /var/run/dhcpd.pid bridge0' returned exit code '1', the output was 'Internet Systems Consortium DHCP Server 4.2.5-P1 Copyright 2004-2013 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ bad range, address 192.168.110.10 not in subnet 192.168.120.0 netmask 255.255.255.0 If you did not get this software from ftp.isc.org, please get the latest from ftp.isc.org and install that before requesting help. If you did get this software from ftp.isc.org and have not yet read the README, please read it before requesting help. If you intend to request help from the dhcp-server@isc.org mailing list, please read the section on the README about submitting bug reports and requests for help. Please do not under any circumstances send requests for help directly to the authors of this software - please send them to the appropriate
    

    The LAN interface is assigned as 192.168.110.1 and the DHCP server is set to use that subnet but looking at Status: Interfaces: or ifconfig it was actually on 192.168.120.1.
    This turns out to be an address I assigned to a virtual IP (IP alias) and forgot about. Not sure how LAN came to be using it as the primary address though.  :-
    Easily solved but doesn't seem right.

    I saw a number of RRD related errors inluding:

    php: rc.bootup: rrdtool restore -f '/var/db/rrd//wan-traffic.xml' '/var/db/rrd//wan-traffic.rrd' failed returning 1.
    ```and similar.
    Some "/var: write failed, filesystem is full" and some "ERROR: Incompatible file version, detected version . This is not supported by the version 0003 restore tool." errors.
    
    Steve

Log in to reply