OpenVPN Site-to-Site through Roadrunner
ehuk last edited by
I was wondering if anyone has managed to setup something similar to this:
Client A (OpenVPN Roadrunner) -> Site A (10.0.0.0/16) -> Site to Site OpenVPN -> Site B (192.168.0.0/16).
Basically I am trying to setup an OpenVPN client PC to connect to pfsense at Site A, then to use the Site to Site VPN between Site A and Site B to connect to Site B on a different network.
Do you think this is possible?
Thanks in advance.
marvosa last edited by
Yes, this is pretty common. Just need to configure separate instances of openvpn (one for the site-to-site and one for roadrunner).
On the road warrior config, you just need to push a route to Site B's LAN.
phil.davis last edited by
Let's assume the SiteA RoadRunner tunnel is 10.42.42.0/24
On SiteB site-to-site Remote Networks put 10.0.0.0/16,10.42.42.0/24
On Site A RoadRunner server Local Network/s put 10.0.0.0/16,192.168.0.0/16
Then routing will work.
Make sure rules on OpenVPN at SiteA and SiteB allow the traffic to/from those subnets.
Then firewalling will allow the traffic.
I connect in like this all the time, to 1 office, and use the whole internal network across lots of offices.