Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Tutorial: Configuring pfSense as VPN client to Private Internet Access

    OpenVPN
    99
    348
    418.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DerelictD
      Derelict LAYER 8 Netgate
      last edited by

      This really should be another thread.  Start one and post a screenshot of the torrent software config page where you're setting these ports.

      Again, you really can't set an outbound destination port for torrents because you have to connect to whatever port the peer is listening on.

      Chattanooga, Tennessee, USA
      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
      Do Not Chat For Help! NO_WAN_EGRESS(TM)

      1 Reply Last reply Reply Quote 0
      • D
        drpete12
        last edited by

        Thanks…Ill start e new thread..sorry to have hijacked this one ;D

        1 Reply Last reply Reply Quote 0
        • D
          drpete12
          last edited by

          When I start openvpn then my Unbound DNS Resolver service gets stopped everytime. Why? when I restart it then the ntp time service gets stopped. I then no longer have internet access even thru default gateway or vpn. Have I done something wrong?

          1 Reply Last reply Reply Quote 0
          • DerelictD
            Derelict LAYER 8 Netgate
            last edited by

            Start another thread.  Nobody is going to see it here.

            Chattanooga, Tennessee, USA
            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
            Do Not Chat For Help! NO_WAN_EGRESS(TM)

            1 Reply Last reply Reply Quote 0
            • L
              lt1360hp
              last edited by

              My PIA vpn died for unknown reasons and during the setup process thought I would for shits go to the PIA support site and see if there was anything new.  I was really looking to see if they were finally supporting better encryption.  I ran across this: https://www.youtube.com/watch?v=IymMdq5Ovls which simplifies the auth process using the username and password in the OpenVPN  - Client section rather than creating the openvpn-password test file.

              PIA seems to still not support better encryption.  >:(

              1 Reply Last reply Reply Quote 0
              • DerelictD
                Derelict LAYER 8 Netgate
                last edited by

                Yeah that was added in 2.2

                Chattanooga, Tennessee, USA
                A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                Do Not Chat For Help! NO_WAN_EGRESS(TM)

                1 Reply Last reply Reply Quote 0
                • L
                  lt1360hp
                  last edited by

                  Just saw that further up the thread chain.  Should have figured I wasn't the first one.

                  1 Reply Last reply Reply Quote 0
                  • R
                    rmpfyf
                    last edited by

                    An awesome tutorial, we have the house under PIA. I added some WAN rules to allow DNS servers, pfsense upgrade and time servers through, a second-last rule to allow traffic through the VPN server, and to block all else (I want strict control of what goes through the VPN).

                    Thanks to this thread I was also able to exclude our lounge room smart TV from the VPN.

                    I'm running into issues getting port forwarding running over the lounge room TV - or even getting basic ports to show that probably don't need to be forwarded at all. The TV needs 80, 443 and 48705 open. I can't get even 80 or 443 to show as open on the IP address reserved for the TV. It is routing outside the VPN, which is a start. This happens whether I have port forwarding enabled or not.

                    If I suspend the LAN rule allowing an IP address to run outside the VPN, 80 and 443 are open (seen externally and internally with reflection on).

                    Any help appreciated. I feel I've missed something obvious throughout this thread.

                    1 Reply Last reply Reply Quote 0
                    • DerelictD
                      Derelict LAYER 8 Netgate
                      last edited by

                      You should probably start your own thread and post more details about what you have done. Nobody can really offer any help with what has been provided.

                      Chattanooga, Tennessee, USA
                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                      1 Reply Last reply Reply Quote 0
                      • R
                        rmpfyf
                        last edited by

                        Thanks for responding.

                        Can do, along with configuration screenshots… should it go in the OpenVPN or Firewalling sub-boards?

                        1 Reply Last reply Reply Quote 0
                        • DerelictD
                          Derelict LAYER 8 Netgate
                          last edited by

                          Probably NAT if it's a port forwarding issue.

                          Chattanooga, Tennessee, USA
                          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                          Do Not Chat For Help! NO_WAN_EGRESS(TM)

                          1 Reply Last reply Reply Quote 0
                          • F
                            floyd2
                            last edited by

                            New here and to pfsense and having some problems getting it setup. Keep on getting error An IPv4 protocol was selected, but the selected interface has no IPv4 address.

                            pfSense.localdomain_-OpenVPN_Client-_2016-01-27_17.45.34.jpg
                            pfSense.localdomain_-OpenVPN_Client-_2016-01-27_17.45.34.jpg_thumb

                            1 Reply Last reply Reply Quote 0
                            • DerelictD
                              Derelict LAYER 8 Netgate
                              last edited by

                              Does WAN have an IPv4 Address?

                              (And you can use the User Authentication Settings instead of that username/password file in advanced options.)

                              Chattanooga, Tennessee, USA
                              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                              Do Not Chat For Help! NO_WAN_EGRESS(TM)

                              1 Reply Last reply Reply Quote 0
                              • F
                                floyd2
                                last edited by

                                Thanks for the guide, finally got it set up. I have a 4 port lan card and only set up 1 lan port during setup. Is it possible to configure the other 3 to work with PIA? I've tried configuring but end up losing internet connection on the original lan port.

                                1 Reply Last reply Reply Quote 0
                                • DerelictD
                                  Derelict LAYER 8 Netgate
                                  last edited by

                                  What are you doing with the four LAN ports? Are you creating four different networks?

                                  Chattanooga, Tennessee, USA
                                  A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                  DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                  Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                  1 Reply Last reply Reply Quote 0
                                  • F
                                    floyd2
                                    last edited by

                                    @Derelict:

                                    What are you doing with the four LAN ports? Are you creating four different networks?

                                    Port for Roku, TV and computer. Thinking it may be easier to to install access point off the one LAN port, but if the other ports can be used I would prefer that.

                                    1 Reply Last reply Reply Quote 0
                                    • DerelictD
                                      Derelict LAYER 8 Netgate
                                      last edited by

                                      No. pfSense is not a switch. Get a switch. The switch on the LAN side of a router used as an AP would be fine just disable its DHCP server first.

                                      Chattanooga, Tennessee, USA
                                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                      1 Reply Last reply Reply Quote 0
                                      • F
                                        floyd2
                                        last edited by

                                        Ok thanks

                                        1 Reply Last reply Reply Quote 0
                                        • J
                                          jameshouston135 Banned
                                          last edited by

                                          Although all information are here is good enough but it you are willing to Create OpenVPN interface then you need to go with this.

                                          - Click "Interfaces"
                                              - Click "(assign)"
                                              - "Available network ports:" select "ovpnc1(PIA OpenVPN)"
                                              - Click "add selected interface" (icon is a "+" symbol on a small lined sheet of paper)
                                          However for more vpn Configuring you may also explore vpnrnaks

                                          1 Reply Last reply Reply Quote 0
                                          • RangoR
                                            Rango
                                            last edited by

                                            So pia vpn was working on pfsense then i started getting messages vpn host which is pia midewest is not recognized host. So i rebooted and same.
                                            I setup everything from scratch again and now i can not get onto pia vpn. I've been trying all day today. I need some help.
                                            I think the issue may be with NAT rules. My nat rules do not generate in 2.2.6 client as they did in this tutorial in earlier version.
                                            But i recrated it the same way and still no luck. I can not start vpn service. Any help is very much appriciated. I'm exhusted. lol

                                            I had to clone the mac of my physical nic card (wan) in order to get isp wan address. Is that the reason why host name is not recognized ?

                                            Here is the log

                                            Feb 17 14:35:31 openvpn[33355]: client_connect_script = '[UNDEF]'
                                            Feb 17 14:35:31 openvpn[33355]: learn_address_script = '[UNDEF]'
                                            Feb 17 14:35:31 openvpn[33355]: client_disconnect_script = '[UNDEF]'
                                            Feb 17 14:35:31 openvpn[33355]: client_config_dir = '[UNDEF]'
                                            Feb 17 14:35:31 openvpn[33355]: ccd_exclusive = DISABLED
                                            Feb 17 14:35:31 openvpn[33355]: tmp_dir = '/tmp'
                                            Feb 17 14:35:31 openvpn[33355]: push_ifconfig_defined = DISABLED
                                            Feb 17 14:35:31 openvpn[33355]: push_ifconfig_local = 0.0.0.0
                                            Feb 17 14:35:31 openvpn[33355]: push_ifconfig_remote_netmask = 0.0.0.0
                                            Feb 17 14:35:31 openvpn[33355]: push_ifconfig_ipv6_defined = DISABLED
                                            Feb 17 14:35:31 openvpn[33355]: push_ifconfig_ipv6_local = ::/0
                                            Feb 17 14:35:31 openvpn[33355]: push_ifconfig_ipv6_remote = ::
                                            Feb 17 14:35:31 openvpn[33355]: enable_c2c = DISABLED
                                            Feb 17 14:35:31 openvpn[33355]: duplicate_cn = DISABLED
                                            Feb 17 14:35:31 openvpn[33355]: cf_max = 0
                                            Feb 17 14:35:31 openvpn[33355]: cf_per = 0
                                            Feb 17 14:35:31 openvpn[33355]: max_clients = 1024
                                            Feb 17 14:35:31 openvpn[33355]: max_routes_per_client = 256
                                            Feb 17 14:35:31 openvpn[33355]: auth_user_pass_verify_script = '[UNDEF]'
                                            Feb 17 14:35:31 openvpn[33355]: auth_user_pass_verify_script_via_file = DISABLED
                                            Feb 17 14:35:31 openvpn[33355]: port_share_host = '[UNDEF]'
                                            Feb 17 14:35:31 openvpn[33355]: port_share_port = 0
                                            Feb 17 14:35:31 openvpn[33355]: client = ENABLED
                                            Feb 17 14:35:31 openvpn[33355]: pull = ENABLED
                                            Feb 17 14:35:31 openvpn[33355]: auth_user_pass_file = '/etc/openvpn-password.txt'
                                            Feb 17 14:35:31 openvpn[33355]: OpenVPN 2.3.8 amd64-portbld-freebsd10.1 [SSL (OpenSSL)] [LZO] [MH] [IPv6] built on Aug 21 2015
                                            Feb 17 14:35:31 openvpn[33355]: library versions: OpenSSL 1.0.1l-freebsd 15 Jan 2015, LZO 2.09
                                            Feb 17 14:35:31 openvpn[33355]: WARNING: file '/etc/openvpn-password.txt' is group or others accessible
                                            Feb 17 14:35:31 openvpn[33627]: MANAGEMENT: unix domain socket listening on /var/etc/openvpn/client1.sock
                                            Feb 17 14:35:31 openvpn[33627]: NOTE: the current –script-security setting may allow this configuration to call user-defined scripts
                                            Feb 17 14:35:31 openvpn[33627]: LZO compression initialized
                                            Feb 17 14:35:31 openvpn[33627]: Control Channel MTU parms [ L:1558 D:138 EF:38 EB:0 ET:0 EL:3 ]
                                            Feb 17 14:35:31 openvpn[33627]: Socket Buffers: R=[42080->65536] S=[57344->65536]
                                            Feb 17 14:35:47 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:35:47 openvpn[33627]: Data Channel MTU parms [ L:1558 D:1450 EF:58 EB:143 ET:0 EL:3 AF:3/1 ]
                                            Feb 17 14:35:47 openvpn[33627]: Local Options String: 'V4,dev-type tun,link-mtu 1558,tun-mtu 1500,proto UDPv4,comp-lzo,cipher AES-128-CBC,auth SHA1,keysize 128,key-method 2,tls-client'
                                            Feb 17 14:35:47 openvpn[33627]: Expected Remote Options String: 'V4,dev-type tun,link-mtu 1558,tun-mtu 1500,proto UDPv4,comp-lzo,cipher AES-128-CBC,auth SHA1,keysize 128,key-method 2,tls-server'
                                            Feb 17 14:35:47 openvpn[33627]: Local Options hash (VER=V4): '66096c33'
                                            Feb 17 14:35:47 openvpn[33627]: Expected Remote Options hash (VER=V4): '691e95c7'
                                            Feb 17 14:36:14 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:36:36 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:36:57 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:37:19 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:37:56 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:38:48 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:39:40 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:40:31 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:41:22 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:42:13 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known
                                            Feb 17 14:43:05 openvpn[33627]: RESOLVE: Cannot resolve host address: us-east.privateinternetaccess.com: hostname nor servname provided, or not known

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.