I can't route through my openVPN tunnel

[HC]

Hey all,

im having an issue getting to my LAN from my openVPN connection. I'm able to connect to the vpn with no issues  but I cannot access anything on my LAN. I have routes in pfsense to both openvpn network and the LAN, and my laptop also has route to my pan network through my vpn tunnel.

mac laptop routing info

10.2/16            10.2.6.5           UGSc            0        0    tun0
10.2.6/29          10.2.6.5           UGSc            0        0    tun0
10.2.6.5           10.2.6.6           UH              2        0    tun0

and my pfbox has

IPv4 
Destination Gateway Flags Refs Use Mtu Netif Expire 

default 198.206.134.1 UGS 0 3883508 1500 em0   
8.8.8.8 198.206.134.1 UGHS 0 14502 1500 em0   
10.0.0.0/8 10.3.0.2 UGS 0 5952 1500 ovpns2   
10.2.0.0/16 link#2 U 0 9352529 1500 em1   
10.2.0.1 link#2 UHS 0 0 16384 lo0   
10.2.6.0/29 10.2.6.2 UGS 0 1362 1500 ovpns1   
10.2.6.1 link#8 UHS 0 0 16384 lo0   
10.2.6.2 link#8 UH 0 0 1500 ovpns1   
10.3.0.1 link#30 UHS 0 0 16384 lo0   
10.3.0.2 link#30 UH 0 0 1500 ovpns2   
68.56.40.15 198.206.134.1 UGHS 0 7320231 1500 em0   
127.0.0.1 link#6 UH 0 99076 16384 lo0   
198.206.134.0/24 link#1 U 0 1465612 1500 em0   
198.206.134.59 link#1 UHS 0 0 16384 lo0 

on the firewall on pfsense i have a allow any>any rule for openvpn.

EDIT:
heres my trace route from my computer

Traceroute has started…

traceroute to 10.2.0.1 (10.2.0.1), 64 hops max, 72 byte packets
 1  * * *
 2  * * *
 3  * * *
 4  * * *
 5  * * *
 6  * * *
 7  * * *
 8  * * *
 9  * * *
10  * * *
11  * * *
12  * * 10.2.0.1 (10.2.0.1)  1100.417 ms

im not sure what to do :(

[viragomann]

You have a strange VPN setup.

VPN1: 10.2.6.0/29
VPN2: 10.0.0.0/8
?????

VPN1 is part of VPN2!
Why is VPN2 as large? I can't believe that your hardware can manage as many connections.
Why is VPN1 as small? By default the server allocates a /30 net for each client.

You should clean up this at first.