SAN Storage to SAN Storage - One Inter vlan layer 3 switch
-
Hello,
I am having issues doing inter VLANing between my two SAN devices through a single, Layer 3 HP switch. I am not too familiar with HP my background is in Cisco, so I was hoping someone could tell me what I am missing. Here is the current configuration in my Switch:
hostname "ProCurve 2910al-48G Switch"
ip routing
vlan 1
name "DEFAULT_VLAN"
untagged 1-4,15-24,26-30,36,43-48
ip address dhcp-bootp
no untagged 5-14,25,31-35,37-42
exit
vlan 200
name "SANA"
untagged 5-14,37-38
ip address 10.0.1.1 255.255.255.0
exit
vlan 400
name "VLAN400"
no ip address
exit
vlan 600
name "SANB"
untagged 25,31-35,39-42
ip address 10.1.1.1 255.255.255.0
exit
ip route 0.0.0.0 0.0.0.0 10.0.0.1
ip route 0.0.0.0 0.0.0.0 10.1.0.1
snmp-server community "public" unrestricted
no autorun
password manager
password operatorSAN Set up
SANA SANB
Mgmt1:10.0.0.40 /24 GW:10.0.0.1 <–Port 26 VLAN 1 Mgmt1:10.1.0.40 /24 GW:10.1.0.1 <--Port 28 VLAN1
Mgmt1:10.0.0.41 /24 GW:10.0.0.1 <--Port 27 VLAN 1 Mgmt1:10.1.0.41 /24 GW:10.1.0.1 <--Port 29 VLAN1iSCSI A1: 10.0.1.10 iSCSI A1: 10.1.1.10
iSCSI A1: 10.0.1.11 iSCSI A1: 10.1.1.11
iSCSI A1: 10.0.1.12 iSCSI A1: 10.1.1.12
iSCSI A1: 10.0.1.13 iSCSI A1: 10.1.1.13
iSCSI A1: 10.0.1.14 iSCSI A1: 10.1.1.14
iSCSI A1: 10.0.1.15 iSCSI A1: 10.1.1.15
iSCSI A1: 10.0.1.16 iSCSI A1: 10.1.1.16
iSCSI A1: 10.0.1.17 iSCSI A1: 10.1.1.17I am able to ping all the iSCSI interfaces from the switch, I am able to ping and login to SANA management, but I am not able to ping or logon to the SANB management interface.
Thanks,