Local vs VPN DNS Name Resolution
OpenVPN server set to force all traffic through tunnel and provide DNS server to clients.
Although this works. The clients still resolve names with the local DNS as well.
If an address is returned for say Yahoo.com by both the VPN DNS and local DNS, which one is used by the client? I'm guessing the first one returned would be used. But since the connection is actually going to be made via the VPN it seems that would be the proper address to use.
Is there anyway to prevent non-local name queries from being made to the local DNS and only to the VPN DNS? With out local network access being blocked of course.
Update: (6:21 PM PDT 5/24/2014)
Original description above is a little in accurate.
All internet name resolution queries are being handled by the local network DNS and not being sent to the VPN DNS.
Really would like to figure this out to get all internet name resolution queries to be handled by the VPN DNS. Having them handled by the local DNS seems like a big security hole. As public hot spots could direct clients to cloned sites to collect user credentials for banks etc.
Client is Windows 8.1 Pro
Ideas and / or confirmation (issue duplication / verification) welcome.
"With out local network access being blocked of course."
Well if the local dns is on the local dns, its up to the client what he uses - you can hand out dns when they connect for the vpn. And if the dns they decide to use was off their network then they would have to go through the vpn to get there, etc.
But if dns they are using local and you want to allow local access, then you need to have the client make sure they use the dns you hand out from your vpn first - take a look at your binding order.
My binding order does not show any OpenVPN item.
(Windows 8.1 Pro)
![Binding Order Win 8.1.jpg](/public/imported_attachments/1/Binding Order Win 8.1.jpg)
![Binding Order Win 8.1.jpg_thumb](/public/imported_attachments/1/Binding Order Win 8.1.jpg_thumb)
Your on provider - I renamed mined, your is prob called tap, etc. Whatever the default is.. Switch over to adapters and bindings. What does it show?
Ah okay I see.
Yes in Adapters and Bindings my TAP device is named Local Area Connection.
I'll try moving it to the top of the list and see what that does to the name resolution.
Thanks for the pointer.
Well that's a little bit of an improvement, but not much.
Queries for internet names (non-local and non-vpn) using nslookup all go to the VPN DNS exclusively. This is the desired behavior.
However, for browsing, queries still go to both the local and VPN DNS servers and responses are received from both. The desired behavior would be for only local name queries to be sent to the local DNS server and all other name queries to be sent to the VPN DNS server.
" The desired behavior would be for only local name queries to be sent to the local DNS server and all other name queries to be sent to the VPN DNS server."
That is not how dns works.. You would have to run a nameserver on your local box - and create forwarder rules, so all your KNOWN local went to your local dns server, and everything else (non local and internet went to whatever other dns you wanted to send it to)
What do you mean by browsing btw, like \somename or ping hostnameonly ?
Browsing is not a dns thing.. queries for FQDN are what dns is for.. if your client is sending hostname to dns how do you expect it to resolve in the first place without domain to look up that the name server either forwards on, or is authoritative for..
What response are you getting from your vpn dns, it sure and the hell would not know about your local zones?
please give a detailed example of for starters how you know where the queries are going and what your getting back for an answer.. window client does not query all the dns servers it has listed at once.. It will query one, if it doesn't get answer it will go onto next, etc..
What version of windows is this client?
Using Wireshark to capture both the WiFi and VPN networks. Filter on port 53.
Query for nslookup yahoo.con goes to the VPN DNS only. As desired.
Browse (IE) to http://yahoo.com and the name queries go to both the local (192.168.1.1) and VPN (192.168.2.1) DNS servers. And resolved addresses are received from both.
Seems like this could be a big security hole. Possible for a public hot spot network to send clients to malicious sites even though they are using a VPN.
That is your browser doing that - not the OS.. Don't use IE for starters if your worried about security ;)
Well yeah if you query them, they will answer if they can ;)
It's not just IE that this OpenVPN DNS behavior occurs with.
Its not openvpn behavior.. Openvpn has nothing to do with dns, what your os or application does with what its handed has nothing to do with openvpn.
I don't see this behavior, are you talking about queries for such like wpad ?
You see in first picture that hey I am doing dns to the dns server on my openvpn interface..
Look what happens if I ask for something like pfsense.local.lan - it asks my openvpn dns, he says NX.. Sorry.. there is no domain like that.. So client gives up.. Now if dns server had not answered, or returned serv fail, then sure would of keep trying to resolve via methods it knows how to use to resolve.
You sure your not seeing broadcasts for names – we dns your set to says fails to respond windows will get desperate and even broadcast for your fqdn even though it doesn't exist, etc.
Lets see a specific example of what your concerned with.
Wireshark capture on both the WiFi and OpenVPN interfaces with capture filter 'port 53'.
192.168.1.x is local WiFi hotspot network.
192.168.22.x is OpenVPN to pfSense (configured to force all traffic through VPN and provide DNS servers list.
Browse to: https://wwws.ameritrade.com/apps/LogIn/
DNS queries for the non-local name are sent to both the local WiFi hotspot network DNS server and the OpenVPN DNS server.
DNS response received from both. Making it possible for the local WiFi hotspot network DNS to provide an address that sends the client to a malicious site.
OpenVPN Forum Thread:
![OpenVPN DNS.jpg](/public/imported_attachments/1/OpenVPN DNS.jpg)
![OpenVPN DNS.jpg_thumb](/public/imported_attachments/1/OpenVPN DNS.jpg_thumb)
kpa last edited by
Are you handing out one or two DNS forwarders during the OpenVPN tunnel set up? If you're handing out just one forwarder Windows may keep the second forwarder from the initial DHCP setup and combine it with the one it got from the OpenVPN tunnel set up. Try giving the client at least two DNS forwarders and see how it behaves then.
But yes, this has almost nothing to do with OpenVPN itself. Windows is known for its "creative adaptations" of internet standards and this is just one of them.
Well my home box that I showed was static IP on its local interface..
Its quite possible windows does something odd with dhcp.. It sure and the F shouldn't but as stated MS likes to go their own route sometimes when it comes to standards.
I vpn to my home network pretty much every single day from work, so happy to validate what your seeing. That second query should not be happening - unless the fist 1 failed to answer or returned serv fail. But again this has NOTHING to do with openvpn.. Openvpn just hands the client dns to use, it can not control the how the OS uses or doesn't use that info.
You did update your binding btw? Your screenshot was of providers.. keep in mind if you enable or disable interfaces this order can and does change.. So double check it, from your sniff where the local dns was .001 second later I would assume vpn connection is first.. Its best to rename your interfaces so you know exactly what they are vs local connection 1, local connection 2 ;)
Ok - from a quick test when I got into the office, I set client to redirect-gateway def1
now get this in my route print for default, before I was not redirecting
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 10.56.41.1 10.56.41.36 10
0.0.0.0 184.108.40.206 10.0.200.5 10.0.200.6 20
Now what I noticed right off the bat was that it was sending dns to my local configured dns at 10.56.144.11 and 10.56.144.21 down my vpn connection. This is all it was doing it was not sending anything to my 192.168.1.253 dns (pfsense) down the vpn..
So as suggested I added couple more entries fro dns to openvpn config.. so it handed out 192.168.1.253 3 times
Ethernet adapter vpn:
Connection-specific DNS Suffix . : local.lan
Description . . . . . . . . . . . : TAP-Windows Adapter V9
Physical Address. . . . . . . . . : 00-FF-5A-2F-7E-EA
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.0.200.6(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.252
Lease Obtained. . . . . . . . . . : Tuesday, May 27, 2014 10:19:14 AM
Lease Expires . . . . . . . . . . : Wednesday, May 27, 2015 10:19:14 AM
Default Gateway . . . . . . . . . :
DHCP Server . . . . . . . . . . . : 10.0.200.5
DNS Servers . . . . . . . . . . . : 192.168.1.253
NetBIOS over Tcpip. . . . . . . . : Enabled
Now watching dns queries with wireshark - I only see dns queries to my pfsense box down the vpn.. Nothing going local at all.
Ok something is weird, I disconnected and connected again and now its only sending queries to my local dns - but down the gateway.. I don't have dns on my local segment to test that scenario. Windows can do some odd shit for sure.. In this scenario you would be good because the queries would just go nowhere down your tunnel to those addresses.. If your worried about dns leakage, I would prob use a proxy on your vpn side and set your browser to use that proxy and setup in firefox for example the socks dns setting.
Pippin, Maybe this would be a better place to continue the "block-outside-dns" discussion from https://forum.pfsense.org/index.php?topic=110910.0
So verb 4 shows the logs as you have too. So my only issue with this is that it eliminates resolution of local names. Need those some places.
continue?? this thread was from 2014 ;)
Hmm, ok I see, the difference is that I'm not in a road worrier situation.
Connecting from home to my external server (NAS) which runs (adblocking) DNS and I can still talk to local.
Maybe ask over at OpenVPN Community Forum or even better on the users mailing list?
"Connecting from home to my external server"
How is that not a road warrior connection?? You don't have a site to site setup do you? If its not site to site then your road warrior.
I mean as in local is my home and my home is not switching networks :)
continue?? this thread was from 2014 ;)
Continuing from the other thread that we had hijacked.
Yes this thread is from 2014. Is my thread that I started on the specific subject of local vs. VPN DNS name resolution, or more concisely put "DNS leakage", and previously there had not been a solid resolution to the issue. So it is a very direct fit for the newly implemented "block-outside-dns" option discussion.
So what exactly do you want again.
So you want to use your vpn dns, but not your local dns to resolve stuff other than local? Is that what your after? Yeah not going to happen.. How do you control your client to only ask the local dns where its at for stuff that is local, and ask your vpn dns for everything else..
Or am I missing something?
kpa last edited by
I believe the following is possible when the client is MS Windows:
- The TUN/TAP adapter on the client gets an adapter specific DNS domain name.
- The DNS resolvers pushed from the OpenVPN server are associated with the TUN/TAP adapter on the client.
- DNS names ending with this adapter specific DNS domain name get resolved by the adapter specific DNS forwarders which can be directed over the VPN tunnel using routes.
Of course none of this will work on any other operating system.
"DNS names ending with this adapter specific DNS domain name get resolved by the adapter specific DNS forwarders which can be directed over the VPN tunnel using routes."
Where did you get that idea from?? Where is the MS article that says dns is used based upon connection specific domains or search order?
That is not how it works…
Now per the above there was an API that allows a program do do name resolution out a specific interface... Are you writing the program to tell your browser what to resolve and from where to use this API? Or any of your other applications you might use? They made some changes to the binding order of how name resolution is done. But I have not read anywhere that if I put a specific domain name on a specific interface that that is the dns servers it uses for name resolution of that domain name.. But will for sure test it on monday when get to work.. Because what I can tell you from every single day using vpn into home network and resolving different things both locally and remotely.. That is not how it works on windows 7 for sure.. But sure I will double check it..
I'm thinking/wondering if maybe the name resolution you are getting for local services is WINS. With the block outside dns enabled I can for example ping via local host name even though there is no DNS resolution of the name. Though there is a slight second or two delay in resolving the address since WINS is later in the resolution order.
Pretty much. Yes, I want to have my cake and eat it too. I want local names resolution for local resources only, and VPN provided DNS only for everything else. I know it doesn't work like that. But that's how I want it to work.
Will try to find why it
s working for me. That machine as I just discovered, is getting detected through NetBIOS so yes maybe its WINS.
Under Network select View-Details, then right click on the columns (Name-Category-Workgroup-etc.) and select "Discovery Method".
Then you can see how they`re discovered, obviously :o
I hope that
s clear enough because I dont have English version of Windows :)