Netgear USB WNDA3001v1 (a/b/g/n) Not Recognized.
-
I plugged in my "NETGEAR RangeMax Dual Band Wireless-N USB Adapter" a.k.a. WNDA3100v1…
I expected to find it available in the webConfigurator -> Interfaces: Assign Network Ports page (../interfaces_assign.php), but no such luck.
Here is the log entry:
Jun 1 16:53:41 kernel: ugen4.3: <ather>at usbus4</ather>
I ran:
$ usbconfig show_ifdrv ugen0.1: <uhci root="" hub="" via="">at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen0.1.0: uhub0: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">ugen1.1: <uhci root="" hub="" via="">at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen1.1.0: uhub1: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">ugen2.1: <uhci root="" hub="" via="">at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen2.1.0: uhub2: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">ugen3.1: <uhci root="" hub="" via="">at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE ugen3.1.0: uhub3: <via 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">ugen4.1: <ehci root="" hub="" via="">at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE ugen4.1.0: uhub4: <via 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">ugen3.2: <usb reader="" vendor="" 0x058f="">at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen3.2.0: umass0: <vendor 0="" 2="" 0x058f="" usb="" reader,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">ugen2.2: <novatel wireless="" cdma="" novatel="" inc.="">at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON ugen2.2.0: u3g0: <data interface="">ugen4.2: <product 0x3070="" vendor="" 0x148f="">at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON ugen4.2.0: run0: <> ugen4.3: <usb2.0 wlan="" ather="">at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON</usb2.0></product></data></novatel></vendor></usb></via></ehci></via></uhci></via></uhci></via></uhci></via></uhci>
As you can see, it's the last entry.
I got busy on Google…
Here is what seems to be some good info:
https://wikidevi.com/wiki/Netgear_WNDA3100v1I pulled out the following:
Netgear WNDA3100v1
Interface USB
Form Factor: dongle
USB Connector: Male A
FCC ID: PY307300073
FCC approval date: 11 January 2008
Manufacturer: Delta Networks
Country of manuf.: China
UPC: 606449055832
USB Vendor ID:0846 USB Product/Device ID:9010 0846:9010 | 0x0846:0x9010
Chipset: Atheros AR9001U-2NX
Chip 1: AR9170 (Otus) (802.11b/g/n ?)
Chip 2: AR9104 ( 802.11a ?)
WiFi/PHY Modes: abgn
MiMo Config: 2x2:2
OUI (1st 6 of MAC) 00:22:3F / 00:1F:33Anyone?
Thanks!
-
ugen means no driver attached.
Try a 2.2 snapshot
-
Thanks Jim,
But, eh…. While we're ALL beta testers, really, I'm not ready to be an ALPHA tester!
I've been able to look up which version of BSD has certain drivers, but have not been able to find match-ups between drivers and wireless devices/cards/chips...
I'm not quite clear on the "ugen". In the output I posted, earlier in the thread, where there are two similar entries with "ugen", with x.x & x.x.x numbers, the second entry has the driver info. "ugen4.3" is the one without a driver, listing the Atheros chip of the WNDA3001....