Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Taming the beasts… aka suricata blueprint

    IDS/IPS
    64
    504
    255.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • BBcan177B
      BBcan177 Moderator
      last edited by

      @G.D.:

      About IPv6 blacklisting.

      It seems that experts in general have an opinion that blacklisting has not been all that effective in IPv4 world, so may as well just abandon it for IPv6, and concentrate on other tactics instead.

      Say we still want to blacklist, I think we are going to quit blacklisting individual addresses all together, and ban entire /64 or /42 outright.
      Has anyone dabbled in IPv6 blacklisting yet? How is the quality of public IPv6 blacklists?

      I haven't even started to look at IPv6. I found this old link on Spamhaus website

      http://www.spamhaus.org/organization/statement/012/spamhaus-ipv6-blocklists-strategy-statement

      I don't know of any IPv6 Blocklists? If anyone has time to research, please forward to the group and we can begin to work out a process to include those.

      @jflsakfja:

      Now, if there was a way to keep track of the blocked hosts and identify subnets that could be automatically banned…I'm looking at you BBcan177  ;) (same thing the script does, but using pfsense's snort2c table)

      In regards to the snort2c file, I think keeping track of Repeated Offenders is a great Idea. This should also involve the pfSense Firewall Blocks also.

      I have been working away at getting a Beta of pfBlocker that incorporates my script and some other new features. I believe that I am 90% there. Would be nice to get help from the pfBlocker developers but they seem to have no interest in supporting a new release of pfBlocker. I am not even sure if the Devs want or will support it when I get it finalized. It may end up being a new package…..

      A few members have been helping to beta test the package and that is helping weed out issues. If anyone has real time to spare, drop me a PM if you have interest in helping BETA test. Thanks to Cino and wcrowder for their support!!  ;) ;)

      "Experience is something you don't get until just after you need it."

      Website: http://pfBlockerNG.com
      Twitter: @BBcan177  #pfBlockerNG
      Reddit: https://www.reddit.com/r/pfBlockerNG/new/

      1 Reply Last reply Reply Quote 0
      • BBcan177B
        BBcan177 Moderator
        last edited by

        @squatch04:

        Also, would pfBlocker.widget.php_PATCH and diag_dns.php_PATCH work with 2.1.5?

        I would assume that there are changes to those files in 2.1.5, so I will need to look at it and write a patch.

        From looking at 2.2 and from the 2.1.5 release notes, I think they removed the ability to Resolve External IP lookups. If thats the case, not sure if we should add the functionality manually or leave it alone? Other possibility is to add a new Log in pfBlocker just for the Blocklists and Resolve from there. This way there is no mucking around with pfSense System Files.

        - from the 2.1.5 Release Notes:

        Remove javascript alert DNS resolution action from the firewall log
            view. It was already removed from 2.2, and it's better not to allow a
            GET action to perform that action

        "Experience is something you don't get until just after you need it."

        Website: http://pfBlockerNG.com
        Twitter: @BBcan177  #pfBlockerNG
        Reddit: https://www.reddit.com/r/pfBlockerNG/new/

        1 Reply Last reply Reply Quote 0
        • S
          squatch04
          last edited by

          @BBcan177:

          @squatch04:

          Getting a lot of these errors from lists in my syslog:

          php: rc.filter_configure_sync: The command '/usr/bin/fetch -T 5 -q -o '/var/db/aliastables/AbusePalevo.txt.tmp' 'https://127.0.0.1:43/badips/AbusePalevo.txt'' returned exit code '1', the output was 'fetch: https://127.0.0.1:43/badips/AbusePalevo.txt: Operation timed out'

          How did you configure the Alias Table? It Should be a "URL Table".

          I would also recommend just using the existing IR_ Tables that the Script already created. This saves you the effort of making dozens of Alias Tables.

          /usr/local/www/aliastables/IR_MAIL
          /usr/local/www/aliastables/IR_PRI1
          /usr/local/www/aliastables/IR_IB
          /usr/local/www/aliastables/IR_SEC1
          /usr/local/www/aliastables/IR_PRI2
          /usr/local/www/aliastables/IR_SEC3
          /usr/local/www/aliastables/IR_TOR
          /usr/local/www/aliastables/IR_SEC2
          /usr/local/www/aliastables/IR_PRI3

          Thanks BBcan177,

          I'll try the IR_ Tables instead.

          Currently with the script installed and only Suricata configured following the guidelines on this thread my RAM usage is on average in the 80s%.

          I was thinking of setting up simple cache (squid proxy) along with it but with my RAM usage so high is there anyway i can still get the most out of using Suricata/pfiprep with the squid cache?
          What lists/rules would be fine to disable? (i've followed jflsakfja's guidelines but i still think that there are some lists/rules that may not apply to my usage scenario.)

          I have a 50mbps connection & my pfSense system is an Athlon 64 3000+ with 1.25GB of RAM and 2 nics (LAN/WAN). That's connected to a switch with a wireless AP, 5 wired clients and possibly over 25 wireless clients.

          We are basically a media consuming household (HD streaming,downloads,torrents,skype,teamviewer,facebook etc) and if it was up to me I'd block most of these kinds of traffic but all hell would break loose if i did that, seriously.
          Other than my OpenVPN server that i have on my pfSense machine, squid cache, suricata, pfiprep…that's about it.

          Any rules/lists that you recommend disabling to reduce memory usage?

          1 Reply Last reply Reply Quote 0
          • W
            wetspark
            last edited by

            @G.D.:

            About IPv6 blacklisting.

            It seems that experts in general have an opinion that blacklisting has not been all that effective in IPv4 world, so may as well just abandon it for IPv6, and concentrate on other tactics instead.

            Say we still want to blacklist, I think we are going to quit blacklisting individual addresses all together, and ban entire /64 or /42 outright.
            Has anyone dabbled in IPv6 blacklisting yet? How is the quality of public IPv6 blacklists?

            I see that jflsakfja already reply and I'd agree with near all except that I'd recommend blocking on subnet boundaries with IPv6 and here's why.  /64 is the smallest advertisable block size for IPv6.  In fact that size will likely be assigned to every home/consumer connection.    A /56 or /64 will likely be the smallest allocated size and you'll get your own /64 or so for your home etc.  Some are even saying that could be a /48 but I doubt that.  The trick is that not everyone is a home user and you could have issues with hosted systems and hitting an innocent with a /64 block blacklist entry.  There are other interesting characteristics about IPv6 and I think we will see some innovation in security due to it once we have a broad uptake of the address system.

            So, blacklisting in IPv6 should near certainly be done at those boundaries or we'd be in hairy hell chasing an effective blocking measure.  I'll take that conundrum over  IPv4 hell we are in now.

            1 Reply Last reply Reply Quote 0
            • ?
              A Former User
              last edited by

              @squatch04:

              Thanks BBcan177,

              I'll try the IR_ Tables instead.

              Currently with the script installed and only Suricata configured following the guidelines on this thread my RAM usage is on average in the 80s%.

              I was thinking of setting up simple cache (squid proxy) along with it but with my RAM usage so high is there anyway i can still get the most out of using Suricata/pfiprep with the squid cache?
              What lists/rules would be fine to disable? (i've followed jflsakfja's guidelines but i still think that there are some lists/rules that may not apply to my usage scenario.)

              I have a 50mbps connection & my pfSense system is an Athlon 64 3000+ with 1.25GB of RAM and 2 nics (LAN/WAN). That's connected to a switch with a wireless AP, 5 wired clients and possibly over 25 wireless clients.

              We are basically a media consuming household (HD streaming,downloads,torrents,skype,teamviewer,facebook etc) and if it was up to me I'd block most of these kinds of traffic but all hell would break loose if i did that, seriously.
              Other than my OpenVPN server that i have on my pfSense machine, squid cache, suricata, pfiprep…that's about it.

              Any rules/lists that you recommend disabling to reduce memory usage?

              I'm seeing 22-25% of 4GB RAM usage on systems configured to the T using this guide, so your 80% of 1.25GB seems about right.  1.25 seems wrong though. What's that, 1GB+256MB stick, or 2x512MB+256MB stick? In either case, getting more RAM is what I would do. 1GB shouldn't be more than $20. If you are using 1GB+256MB just get another GB and replace the 256MB module. Since it takes about 1GB for each system configured according to this guide, you should drop down to 50% RAM, which should give you plenty of room to use other things if you need to.

              1 Reply Last reply Reply Quote 0
              • S
                squatch04
                last edited by

                @jflsakfja:

                @squatch04:

                Thanks BBcan177,

                I'll try the IR_ Tables instead.

                Currently with the script installed and only Suricata configured following the guidelines on this thread my RAM usage is on average in the 80s%.

                I was thinking of setting up simple cache (squid proxy) along with it but with my RAM usage so high is there anyway i can still get the most out of using Suricata/pfiprep with the squid cache?
                What lists/rules would be fine to disable? (i've followed jflsakfja's guidelines but i still think that there are some lists/rules that may not apply to my usage scenario.)

                I have a 50mbps connection & my pfSense system is an Athlon 64 3000+ with 1.25GB of RAM and 2 nics (LAN/WAN). That's connected to a switch with a wireless AP, 5 wired clients and possibly over 25 wireless clients.

                We are basically a media consuming household (HD streaming,downloads,torrents,skype,teamviewer,facebook etc) and if it was up to me I'd block most of these kinds of traffic but all hell would break loose if i did that, seriously.
                Other than my OpenVPN server that i have on my pfSense machine, squid cache, suricata, pfiprep…that's about it.

                Any rules/lists that you recommend disabling to reduce memory usage?

                I'm seeing 22-25% of 4GB RAM usage on systems configured to the T using this guide, so your 80% of 1.25GB seems about right.  1.25 seems wrong though. What's that, 1GB+256MB stick, or 2x512MB+256MB stick? In either case, getting more RAM is what I would do. 1GB shouldn't be more than $20. If you are using 1GB+256MB just get another GB and replace the 256MB module. Since it takes about 1GB for each system configured according to this guide, you should drop down to 50% RAM, which should give you plenty of room to use other things if you need to.

                Thanks for the reply.

                You're correct it's 1GB+256MB stick and usage is around 83% of that most of the time and if that's average use for the guide then I'll invest in another 1G of RAM. Security is more important than bandwidth/speed ;D

                1 Reply Last reply Reply Quote 0
                • S
                  squatch04
                  last edited by

                  @BBcan177:

                  @squatch04:

                  Getting a lot of these errors from lists in my syslog:

                  php: rc.filter_configure_sync: The command '/usr/bin/fetch -T 5 -q -o '/var/db/aliastables/AbusePalevo.txt.tmp' 'https://127.0.0.1:43/badips/AbusePalevo.txt'' returned exit code '1', the output was 'fetch: https://127.0.0.1:43/badips/AbusePalevo.txt: Operation timed out'

                  How did you configure the Alias Table? It Should be a "URL Table".

                  I would also recommend just using the existing IR_ Tables that the Script already created. This saves you the effort of making dozens of Alias Tables.

                  /usr/local/www/aliastables/IR_MAIL
                  /usr/local/www/aliastables/IR_PRI1
                  /usr/local/www/aliastables/IR_IB
                  /usr/local/www/aliastables/IR_SEC1
                  /usr/local/www/aliastables/IR_PRI2
                  /usr/local/www/aliastables/IR_SEC3
                  /usr/local/www/aliastables/IR_TOR
                  /usr/local/www/aliastables/IR_SEC2
                  /usr/local/www/aliastables/IR_PRI3

                  Followed your suggestion and changed the URL Tables and it seems to be working (the IPs show up when i mouse over the Aliases) but i still get syslog errors.

                  
Aug 30 09:40:26 	php: rc.filter_configure_sync: The command '/usr/bin/fetch -T 5 -q -o '/var/db/aliastables/IR_SEC2.txt.tmp' 'https://127.0.0.1:443/usr/local/www/aliastables/IR_SEC2'' returned exit code '1', the output was 'fetch: https://127.0.0.1:443/usr/local/www/aliastables/IR_SEC2: Operation timed out'

                  Is this something to be concerned about?

                  pfIP Rep widget shows last update was Aug 30 09:43 with status arrow green (up) though…

                  1 Reply Last reply Reply Quote 0
                  • BBcan177B
                    BBcan177 Moderator
                    last edited by

                    @squatch04:

                    Getting a lot of these errors from lists in my syslog:

                    php: rc.filter_configure_sync: The command '/usr/bin/fetch -T 5 -q -o '/var/db/aliastables/AbusePalevo.txt.tmp' 'https://127.0.0.1:43/badips/AbusePalevo.txt'' returned exit code '1', the output was 'fetch: https://127.0.0.1:43/badips/AbusePalevo.txt: Operation timed out'

                    I don't understand where the .tmp extensions comes from? It should end with .txt?

                    If you are using the IR_ Alias URL Tables, I would remove URL Tables that are referencing the individual files as shown above. I would also delete these individual aliases in /var/db/aliastables

                    Hope that Helps.

                    "Experience is something you don't get until just after you need it."

                    Website: http://pfBlockerNG.com
                    Twitter: @BBcan177  #pfBlockerNG
                    Reddit: https://www.reddit.com/r/pfBlockerNG/new/

                    1 Reply Last reply Reply Quote 0
                    • S
                      squatch04
                      last edited by

                      @BBcan177:

                      @squatch04:

                      Getting a lot of these errors from lists in my syslog:

                      php: rc.filter_configure_sync: The command '/usr/bin/fetch -T 5 -q -o '/var/db/aliastables/AbusePalevo.txt.tmp' 'https://127.0.0.1:43/badips/AbusePalevo.txt'' returned exit code '1', the output was 'fetch: https://127.0.0.1:43/badips/AbusePalevo.txt: Operation timed out'

                      I don't understand where the .tmp extensions comes from? It should end with .txt?

                      If you are using the IR_ Alias URL Tables, I would remove URL Tables that are referencing the individual files as shown above. I would also delete these individual aliases in /var/db/aliastables

                      Hope that Helps.

                      Hey BBCan177!

                      i figured it out.

                      1. "Operation timed out" was caused by the port being blocked. i had previously created a custom port and disabled anti-lockout so entering my port number 66 allowed the fetch command to access the list directory.
                      2. Even though it passed using the custom port i still had the fetch error "not found".
                        i confirmed my directory was correct which was "/usr/local/www/aliastables"
                      
$ ls /usr/local/www/aliastables
IR_CC
IR_IB
IR_Match
IR_PRI1
IR_PRI2
IR_SEC1
IR_SEC2
IR_TOR

                      It seems like the directory was already defaulted to "/usr/local/www/" when adding the URL tables so the shortened directory address of "https://127.0.0.1:66/aliastables/IR_SEC2" for example worked for all the IR Lists.

                      1 Reply Last reply Reply Quote 0
                      • F
                        foetus
                        last edited by

                        Yah, to get back to my issue for future reference.
                        I'll give the example with Google again. The particular problem was for a client that cannot afford to miss certain mails from some senders, including several other connections both in & out. (long story)

                        I present this magnificent snip-it story.
                        Either a manual alias is created, or a cron job to whois a company into a list. Lets take Google.

                        cron job creating the list :

                        List used in floating rules (disabled here, but you get the idea):

                        Detailled :

                        If i enable that rule => Because every Gmail server is matched in that rule, the package is matched, rule is applied (pass it) and thats it.
                        My SMTP NAT rule does .. absolutely nothing. Its very easy to test in this case (enable & send mail = nothing, disable = instant mail received).

                        Disabeling the quick option works offcourse. But if an IP i want to whitelist is ever blacklisted (i'm not saying it is, or will be any time soon, does not matter as its a direct request from the direction there) i'm screwed :).
                        Since the blocklist beneath it will match, and will block.

                        I comfirmed the issue with 2 setups, both are completely ignoring NAT after a floating rule match.

                        OR
                        I'm completely wrong, and being the fact it is whitelisted first (like normal interfaces rules - priority ruling) is enough? No quick option.

                        For websites, DNS requests and the bunch its not an issue. Just where a forwarding rule has to be applied after seems to be impossible with floating rules.

                        @BBcan17
                        Haven't checked your updates yet, but since 2.1.5 altered DNS whois the DNS patch to include the lists doesn't show them anymore. Only updated 1 system thus far, so no idea if its a bug or not.

                        edit
                        woud be awesome if you could make a rule with "all ports except xyz". Just like its possible with hosts / networks.

                        1 Reply Last reply Reply Quote 0
                        • ?
                          A Former User
                          last edited by

                          Don't see anything wrong with those, but then again not much is given.

                          1. show the popup for the alias to see the IPs
                          2. show the complete rules (just change public IPs to something obviously public, eg 1.1.1.1 and leave private IPs as private).
                          3. show your floating rules tab
                          4. Run a packet capture on the ingress + egress interfaces and post the redacted (just replace IPs to understand if it's going public or private) text. No need for a full transcript, "Normal" detail will do, just to see how the packets are flowing.

                          I have traffic shaping rules limiting speeds to public IPs, which are in turn NATed to private ones and everything works perfectly, so as far as I can tell nothing gets ignored. And yes, that does apply to both inbound and outbound traffic.

                          1 Reply Last reply Reply Quote 0
                          • F
                            foetus
                            last edited by

                            1.  
                            list goes one quite a bit ;). Its not a problem its not loading or empty.

                            2.  
                            forwarding to alias (IP : 10.0.0.2 == internal exchange server)
                              The rule is applied on both WAN interfaces. Only MX record active on the VDSL interface in question (failover not yet active).
                            3.
                            Nothing but whitelist rule, rest is blocklist blocking.
                            The 2 blocking rules beneath whitelist are to isolate a seperate physical network to acces the main network. (basically a block all from interface x to y). Then a rule to lock down internet acces during the night for the second network.
                            4.
                            capturing WAN when rule is applied gives me :

                            00:47:40.700800 IP 209.85.220.177.38924 > <wanip>.25: tcp 0
00:47:41.699405 IP 209.85.220.177.38924 > <wanip>.25: tcp 0
00:47:43.699672 IP 209.85.220.177.38924 > <wanip>.25: tcp 0
00:47:47.699690 IP 209.85.220.177.38924 > <wanip>.25: tcp 0</wanip></wanip></wanip></wanip>

                            etc

                            disabling floating whitelist Google rule : (recaptured, the previous IP was another sender)

                            00:42:47.405562 IP 209.85.220.181.42122 > <wanip>.25: tcp 0
00:42:47.405847 IP <wanip>.25 > 209.85.220.181.42122: tcp 0
00:42:47.522800 IP 209.85.220.181.42122 > <wanip>.25: tcp 0
00:42:47.523516 IP <wanip>.25 > 209.85.220.181.42122: tcp 100
00:42:47.641067 IP 209.85.220.181.42122 > <wanip>.25: tcp 0
00:42:47.641599 IP 209.85.220.181.42122 > <wanip>.25: tcp 31
00:42:47.641865 IP <wanip>.25 > 209.85.220.181.42122: tcp 191
00:42:47.759789 IP 209.85.220.181.42122 > <wanip>.25: tcp 10
00:42:47.760055 IP <wanip>.25 > 209.85.220.181.42122: tcp 29
00:42:47.878097 IP 209.85.220.181.42122 > <wanip>.25: tcp 186
00:42:47.878731 IP <wanip>.25 > 209.85.220.181.42122: tcp 1418
00:42:47.878768 IP <wanip>.25 > 209.85.220.181.42122: tcp 54
00:42:47.998797 IP 209.85.220.181.42122 > <wanip>.25: tcp 0</wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip>

                            And the 3 test mails I send during the floating rule active get received 5 mins later (re-attempt by gmail server).

                            Internal :
                            rule on :

                            22:51:47.917275 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:47.917442 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0
22:51:48.917181 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:50.917183 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:50.937085 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0
22:51:54.917219 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:56.943003 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0
22:52:02.917255 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:52:08.939232 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0

                            209.85.220.174 is a Gmail server IP, and is present in the Google alias.

                            rule of : (capture running before turning it back off)

                            22:53:43.113162 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.113340 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:43.230793 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.231483 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 100
22:53:43.349044 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.349547 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 31
22:53:43.349829 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 191
22:53:43.467508 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 10
22:53:43.467741 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 29
22:53:43.589822 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 186
22:53:43.590172 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 1418
22:53:43.590213 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 54
22:53:43.710304 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.710853 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 326
22:53:43.723228 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 59
22:53:43.840808 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 69
22:53:43.841143 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 213
22:53:43.959329 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 85
22:53:43.959789 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 53
22:53:44.077556 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 69
22:53:44.080321 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 53
22:53:44.199096 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 1418
22:53:44.199126 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 11
22:53:44.199158 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 165
22:53:44.199278 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:44.632042 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 149
22:53:44.750021 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 37
22:53:44.750129 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:44.750235 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:44.750300 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 85
22:53:44.750437 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:44.867823 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:44.867919 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0

                            test mail instant received, previous test mail 5 mins later.
                            So yea..

                            • its not that it is such a disaster (I can find ways around it tbh). But I cannot stand not knowing why this is happening.

                            "edit" - wrong IP in first capture.

                            google.txt

                            1 Reply Last reply Reply Quote 0
                            • ?
                              A Former User
                              last edited by

                              @foetus:

                              list goes one quite a bit ;). Its not a problem its not loading or empty.

                              Yeap, verified a couple of IPs, and they do indeed belong to google. So the alias does not appear to be the problem.
                              @foetus:

                              forwarding to alias (IP : 10.0.0.2 == internal exchange server)
                                The rule is applied on both WAN interfaces. Only MX record active on the VDSL interface in question (failover not yet active).

                              Port forwarding rule verified and is correct.
                              @foetus:

                              Nothing but whitelist rule, rest is blocklist blocking.
                              The 2 blocking rules beneath whitelist are to isolate a seperate physical network to acces the main network. (basically a block all from interface x to y). Then a rule to lock down internet acces during the night for the second network.

                              General list rules look correct. Love the "GTFO during nighttime" rule. Are you sure the pass rule is applied to the correct interfaces? Careful with those rules. Putting yourself in pfsense's place: What does this rule tell me to do? Pass any traffic destined or sourced from Google, without any further processing. See where I'm going with it? Applying it to the wrong interfaces could open up your network to a spoofed (or originating from Google, who knows?) attacker.
                              @foetus:

                              capturing WAN when rule is applied gives me :

                              00:47:40.700800 IP 209.85.220.177.38924 > <wanip>.25: tcp 0
00:47:41.699405 IP 209.85.220.177.38924 > <wanip>.25: tcp 0
00:47:43.699672 IP 209.85.220.177.38924 > <wanip>.25: tcp 0
00:47:47.699690 IP 209.85.220.177.38924 > <wanip>.25: tcp 0</wanip></wanip></wanip></wanip>

                              Only incoming traffic. No return traffic which is interesting.
                              @foetus:

                              disabling floating whitelist Google rule : (recaptured, the previous IP was another sender)

                              00:42:47.405562 IP 209.85.220.181.42122 > <wanip>.25: tcp 0
00:42:47.405847 IP <wanip>.25 > 209.85.220.181.42122: tcp 0
00:42:47.522800 IP 209.85.220.181.42122 > <wanip>.25: tcp 0
00:42:47.523516 IP <wanip>.25 > 209.85.220.181.42122: tcp 100
00:42:47.641067 IP 209.85.220.181.42122 > <wanip>.25: tcp 0
00:42:47.641599 IP 209.85.220.181.42122 > <wanip>.25: tcp 31
00:42:47.641865 IP <wanip>.25 > 209.85.220.181.42122: tcp 191
00:42:47.759789 IP 209.85.220.181.42122 > <wanip>.25: tcp 10
00:42:47.760055 IP <wanip>.25 > 209.85.220.181.42122: tcp 29
00:42:47.878097 IP 209.85.220.181.42122 > <wanip>.25: tcp 186
00:42:47.878731 IP <wanip>.25 > 209.85.220.181.42122: tcp 1418
00:42:47.878768 IP <wanip>.25 > 209.85.220.181.42122: tcp 54
00:42:47.998797 IP 209.85.220.181.42122 > <wanip>.25: tcp 0</wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip></wanip>

                              Traffic both ways as expected.
                              @foetus:

                              Internal :
                              rule on :

                              22:51:47.917275 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:47.917442 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0
22:51:48.917181 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:50.917183 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:50.937085 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0
22:51:54.917219 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:51:56.943003 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0
22:52:02.917255 IP 209.85.220.174.48733 > 10.0.0.2.25: tcp 0
22:52:08.939232 IP 10.0.0.2.25 > 209.85.220.174.48733: tcp 0

                              Traffic both ways. Replies are leaving the internal server but get choked somewhere on pfsense.
                              @foetus:

                              rule off : (capture running before turning it back off)

                              22:53:43.113162 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.113340 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:43.230793 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.231483 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 100
22:53:43.349044 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.349547 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 31
22:53:43.349829 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 191
22:53:43.467508 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 10
22:53:43.467741 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 29
22:53:43.589822 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 186
22:53:43.590172 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 1418
22:53:43.590213 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 54
22:53:43.710304 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:43.710853 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 326
22:53:43.723228 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 59
22:53:43.840808 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 69
22:53:43.841143 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 213
22:53:43.959329 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 85
22:53:43.959789 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 53
22:53:44.077556 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 69
22:53:44.080321 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 53
22:53:44.199096 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 1418
22:53:44.199126 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 11
22:53:44.199158 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 165
22:53:44.199278 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:44.632042 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 149
22:53:44.750021 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 37
22:53:44.750129 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:44.750235 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:44.750300 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 85
22:53:44.750437 IP 10.0.0.2.25 > 209.85.220.181.33212: tcp 0
22:53:44.867823 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0
22:53:44.867919 IP 209.85.220.181.33212 > 10.0.0.2.25: tcp 0

                              Traffic both ways as expected.

                              @foetus:

                              • its not that it is such a disaster (I can find ways around it tbh). But I cannot stand not knowing why this is happening.

                              Dunno why it's not working tbh. Forgive my notes above, they were needed to follow the "flow"  ;D
                              It should work as is, but can you try changing the gateway in the floating rules to the default gateway? (manually select it instead of it being any)
                              Other than that I don't see anything being wrong. It could be that it's too early, but at least I tried  :P

                              1 Reply Last reply Reply Quote 0
                              • ?
                                A Former User
                                last edited by

                                Sidenote: Last night suricata banned an entire /24 with an incoming unwanted SSH connection alert. Yes, 254 alerts. SSH servers show increased pre-auth terminated sessions from all over the world. Either the Chinese are ramping up their script kiddie attacks, or a 0-day SSH exploit (possibly OpenSSH) has been found. Just letting everyone know, lock down your SSH servers.

                                1 Reply Last reply Reply Quote 0
                                • S
                                  squatch04
                                  last edited by

                                  Hey jflsakfja, or anyone else for that matter….

                                  First off please forgive my ignorance as i am still very much trying to learn all this.

                                  As stated by jflsakfja and on the pfSense Firewall:Rules section, "Everything that isn't explicitly passed is blocked by default. "

                                  Well i followed the guidelines for creating rules and added only rules for ports that my home network uses.

                                  I intentionally did not create rules for Samba shares and ICMP but i could still access my windows network shares and i could still ping internally (but not externally).
                                  I realised that there was a couple of auto created rules in my firewall:NAT:Outbound, most likely created using the pfSense startup wizard and the OpenVPN server wizard.

                                  | WAN  10.0.1.0/24 * * 500 WAN address * YES Auto created rule for ISAKMP - LAN to WAN 
                                  WAN  10.0.1.0/24 * * * WAN address * NO Auto created rule for LAN to WAN 
                                  WAN  127.0.0.0/8 * * * WAN address 1024:65535 NO Auto created rule for localhost to WAN 
                                  WAN  10.0.8.0/24 * * * WAN address * NO Auto created rule for OpenVPN server  |

                                  What's your advice on these rules? should i disable them? can the rules be fine-tuned to be "less vague"? My assumption is that these rules could circumvent the more fine-tuned floating and interface rules created using this thread guidelines?

                                  1 Reply Last reply Reply Quote 0
                                  • ?
                                    A Former User
                                    last edited by

                                    NAT rules shouldn't have an impact on the effect of other rules, as long as the NAT rules didn't automatically create other allow rules (the case for port forwarding for example).

                                    If you didn't create any rules for samba+ICMP, but you can still use those internally, then a rule exists somewhere that allows it. I've seen a couple of posts lately that pfsense allows things it shouldn't allow. That always comes down to misconfiguration issues.

                                    When trying to troubleshoot pfsense, please put yourself into pfsense's place. What would you do with a packet if you followed the rules below:

                                    1. floating rules first
                                    2. per interface rules next
                                    3. NAT rules
                                    4. general block everything rule

                                    Follow the rules through that order, and I'm sure you can find out what the problem is.

                                    1 Reply Last reply Reply Quote 0
                                    • S
                                      squatch04
                                      last edited by

                                      @jflsakfja:

                                      NAT rules shouldn't have an impact on the effect of other rules, as long as the NAT rules didn't automatically create other allow rules (the case for port forwarding for example).

                                      If you didn't create any rules for samba+ICMP, but you can still use those internally, then a rule exists somewhere that allows it. I've seen a couple of posts lately that pfsense allows things it shouldn't allow. That always comes down to misconfiguration issues.

                                      When trying to troubleshoot pfsense, please put yourself into pfsense's place. What would you do with a packet if you followed the rules below:

                                      1. floating rules first
                                      2. per interface rules next
                                      3. NAT rules
                                      4. general block everything rule

                                      Follow the rules through that order, and I'm sure you can find out what the problem is.

                                      I will do that, thanks jflsakfja!

                                      1 Reply Last reply Reply Quote 0
                                      • R
                                        raab
                                        last edited by

                                        So I've setup the pfIPRep rules per Cino's method here https://forum.pfsense.org/index.php?topic=78062.msg427132#msg427132

                                        Testing an outbound rule, for example 141.101.116.122 is in IR_SEC1 and I can still ping it even though my LAN and DMZ are selected

                                        If I select WAN then it gets dropped accordingly, why is this?

                                        Ticking Quick also drops it, do I need to have quick ticked for all the rules?

                                        1 Reply Last reply Reply Quote 0
                                        • C
                                          Cino
                                          last edited by

                                          Check Quick. I forgot to update the screenshots with that..  Without it check, it will compare the rest of your rules and the last one will win.. Which is probably the default allow all lan rule.  When Quick is checked, and there is a match; it will apply that rule and stop processing the rest for that packet.

                                          1 Reply Last reply Reply Quote 0
                                          • R
                                            raab
                                            last edited by

                                            @Cino:

                                            Check Quick. I forgot to update the screenshots with that..  Without it check, it will compare the rest of your rules and the last one will win.. Which is probably the default allow all lan rule.  When Quick is checked, and there is a match; it will apply that rule and stop processing the rest for that packet.

                                            Cool, thanks for that. You're right, I just have the default LAN to ANY rule so that makes sense.

                                            Should I have quick checked for inbound rules or just the outgoing ones?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post