Site to Site OpenVPN cannot communicate 100%

  • I've got a site A (client site) to site B (home office) VPN setup with advanced config command " redirect-gateway def1;  " in the A client, and a outgoing manual route setup such as:
    "CABLE * * * CABLE address * NO Tunnel to other office"

    in the site B pfsense

    Both units are PFSense.

    Now it seems that this is forwarding all traffic from A to B, and even registers the public IP at site A as the public IP of site B.

    However there are some virtual servers that I cannot seem to figure out why they will not respond to pings. I also cannot join the domain on that subnet. The firewall is also off on these devices.

    Site A subnet:
    Site B subnet:

    The firewall is off on all servers at the moment to troubleshoot this and still not working how we need it.

    Is there a way I can direct domain traffic between these hosts without directing ALL traffic? I just want these computers to be able to use certain network apps over a csv file share and join the domain.


  • Also when I do a tracert from site A (89.*) this is the result:


    Tracing route to VS1 []
    over a maximum of 30 hops:

    1    <1 ms    <1 ms    <1 ms
      2  200 ms    28 ms    29 ms
      3    20 ms    37 ms    38 ms  VS1 []

    Trace complete.


    Tracing route to over a maximum of 30 hops

    1    <1 ms    <1 ms    <1 ms
      2    <1 ms    <1 ms    <1 ms [108.170.xx.xx
      3    *        *        *    Request timed out.
      4  ^C

    Tracing route to DATA []
    over a maximum of 30 hops:

    1    <1 ms    <1 ms    <1 ms
      2    22 ms    38 ms    43 ms
      3    21 ms    20 ms    23 ms  DATA []

    Trace complete.

    I can ping my physical nodes perfectly. (1 and 10)  I ping my virtual node (3) and I get nothing.

    Any ideas?

Log in to reply