Client showing connected but not able to navigate to servers on network



  • I have a pfsense 2.1.2 installation and running OpenVPN on the box. There are a number of OpenVPN users on the box. They are all working except for one. The remote user is able to connect to the host and sometimes can ping the different servers at the host but not able to connect using UNC path (\Server). On the users PC I entered a host file to force the ip/server association and it still does not work. The host IP address is 172.16.11.0/24. The VPN Tunnel IP is 10.10.150.0/24 using UDP and port 1194. The IP address of the client is 192. 168.0.0/24

    Let me know what else you will need?

    Here is the openVPN config:

    dev ovpns1

    dev-type tun

    tun-ipv6

    dev-node /dev/tun1

    writepid /var/run/openvpn_server1.pid

    #user nobody

    #group nobody

    script-security 3

    daemon

    keepalive 10 60

    ping-timer-rem

    persist-tun

    persist-key

    proto udp

    cipher AES-128-CBC

    up /usr/local/sbin/ovpn-linkup

    down /usr/local/sbin/ovpn-linkdown

    client-connect /usr/local/sbin/openvpn.attributes.sh

    client-disconnect /usr/local/sbin/openvpn.attributes.sh

    local 72.38.249.106

    tls-server

    server 10.10.150.0 255.255.255.0

    client-config-dir /var/etc/openvpn-csc

    username-as-common-name

    auth-user-pass-verify /var/etc/openvpn/server1.php via-env

    tls-verify /var/etc/openvpn/server1.tls-verify.php

    lport 1194

    management /var/etc/openvpn/server1.sock unix

    max-clients 20

    push "route 172.16.11.0 255.255.255.0"

    ca /var/etc/openvpn/server1.ca

    cert /var/etc/openvpn/server1.cert

    key /var/etc/openvpn/server1.key

    dh /etc/dh-parameters.1024

    tls-auth /var/etc/openvpn/server1.tls-auth 0

    comp-lzo

    persist-remote-ip

    float



  • In this case you can check your firewall logs to see if there is traffic blocked.If it is, just simply create a new rule. System logs can be very helpful.


Log in to reply