Client showing connected but not able to navigate to servers on network
-
I have a pfsense 2.1.2 installation and running OpenVPN on the box. There are a number of OpenVPN users on the box. They are all working except for one. The remote user is able to connect to the host and sometimes can ping the different servers at the host but not able to connect using UNC path (\Server). On the users PC I entered a host file to force the ip/server association and it still does not work. The host IP address is 172.16.11.0/24. The VPN Tunnel IP is 10.10.150.0/24 using UDP and port 1194. The IP address of the client is 192. 168.0.0/24
Let me know what else you will need?
Here is the openVPN config:
dev ovpns1
dev-type tun
tun-ipv6
dev-node /dev/tun1
writepid /var/run/openvpn_server1.pid
#user nobody
#group nobody
script-security 3
daemon
keepalive 10 60
ping-timer-rem
persist-tun
persist-key
proto udp
cipher AES-128-CBC
up /usr/local/sbin/ovpn-linkup
down /usr/local/sbin/ovpn-linkdown
client-connect /usr/local/sbin/openvpn.attributes.sh
client-disconnect /usr/local/sbin/openvpn.attributes.sh
local 72.38.249.106
tls-server
server 10.10.150.0 255.255.255.0
client-config-dir /var/etc/openvpn-csc
username-as-common-name
auth-user-pass-verify /var/etc/openvpn/server1.php via-env
tls-verify /var/etc/openvpn/server1.tls-verify.php
lport 1194
management /var/etc/openvpn/server1.sock unix
max-clients 20
push "route 172.16.11.0 255.255.255.0"
ca /var/etc/openvpn/server1.ca
cert /var/etc/openvpn/server1.cert
key /var/etc/openvpn/server1.key
dh /etc/dh-parameters.1024
tls-auth /var/etc/openvpn/server1.tls-auth 0
comp-lzo
persist-remote-ip
float
-
In this case you can check your firewall logs to see if there is traffic blocked.If it is, just simply create a new rule. System logs can be very helpful.