• Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Search
  • Register
  • Login
Netgate Discussion Forum
  • Categories
  • Recent
  • Tags
  • Popular
  • Users
  • Search
  • Register
  • Login

Warning: fopen(/tmp/config.lock): failed to open stream

Scheduled Pinned Locked Moved Problems Installing or Upgrading pfSense Software
38 Posts 7 Posters 7.1k Views
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • S
    stephenw10 Netgate Administrator
    last edited by Dec 30, 2014, 1:45 PM

    Ok,  that's fairly standard hardware, nothing unusual there. Is it identical on all three sites? Are those Crucial SSDs or really old/small hard drives? How old are they? Checking the SMART stats on them would probably be good idea.
    If it's none of those then i'd look at something unusual in your config that's common across the sites.

    Steve

    1 Reply Last reply Reply Quote 0
    • J
      jimp Rebel Alliance Developer Netgate
      last edited by Dec 30, 2014, 2:20 PM

      @tarun:

      I have just concerned with one of my colleague, he has installed AMD64 but faced the same issue.

      Warning: fopen(/tmp/config.lock): failed to open stream: Device not configured in /etc/inc/util.inc on line 123 Warning: flock() expects parameter 1 to be resource, null given in /etc/inc/util.inc on line 134 Warning: fclose(): supplied argument is not a valid stream resource in /etc/inc/util.inc on line 135 Warning: session_start(): open(/var/tmp//sess_fd59264b4e5cf3b6ae1121f1ccf4762a, O_RDWR) failed: No space left on device (28) in /etc/inc/auth.inc on line 1254

      More likely than not, the disk is dead. If you have multiple units doing it, then it wouldn't be the first time someone got a bad batch of SSDs. We've seen similar bad batches with both Kingston and Crucial in the past.

      It comes down to one of three possibilities:
      1. The drive really is full, or at least /var and /tmp both are (unlikely)
      2. The disk is dead, in which case it's a coin toss as to whether the system will come back after a reboot
      3. The disk has stopped responding to the operating system due to a controller issue, which may be OK after a reboot. Sometimes there are firmware updates for SSDs to help with such problems.

      More info here:
      https://doc.pfsense.org/index.php/Filesystem_Full_/_Out_of_Inode_Errors

      Remember: Upvote with the 👍 button for any user/post you find to be helpful, informative, or deserving of recognition!

      Need help fast? Netgate Global Support!

      Do not Chat/PM for help!

      1 Reply Last reply Reply Quote 0
      • T
        tarun
        last edited by Dec 31, 2014, 10:14 AM

        Hi Steve,

        Yes it is identical on all three sites,

        These Crucial SSDs are brand new hard drives.

        Thanks

        1 Reply Last reply Reply Quote 0
        • S
          stephenw10 Netgate Administrator
          last edited by Jul 21, 2015, 8:50 AM Dec 31, 2014, 2:56 PM

          Well, as Jim said, they could potentially be from a bad batch of drives if you bought them all together or maybe they have bad firmware that can be updated.  :-\ Have you tried using any other drives?

          Steve

          1 Reply Last reply Reply Quote 0
          • I
            Iahmad
            last edited by Jan 1, 2015, 9:23 PM

            the same probelm i was facing and it is with SATA harddisk now i used ide harddisk my luck i found 40 gb IDE hard disk and than i chang from bios hard disk detection auto to LBA(Logical Block Addressing) now it is working since two days hope it has solved my probelm.

            1 Reply Last reply Reply Quote 0
            • T
              tarun
              last edited by Jan 14, 2015, 11:57 AM

              Hi Guys,

              We have faced the issue again on one of our site and we need to rebuilt the firewal as it was crash after we reboot.

              Please let me know if any one has solution for this.

              Thanks

              pfsense.jpg
              pfsense.jpg_thumb

              1 Reply Last reply Reply Quote 0
              • S
                stephenw10 Netgate Administrator
                last edited by Jan 14, 2015, 1:17 PM

                Have you checked the SMART parameters from these SSDs? Firmware updates?

                Steve

                1 Reply Last reply Reply Quote 0
                • T
                  tarun
                  last edited by Jan 15, 2015, 9:25 AM

                  Hi Steve,

                  Yes, we have run SMART parameter on SSD its seems fine and yesterday one more pfsense failed with the same error.

                  Please have a look on SMART report.

                  Thanks

                  SMART.jpg
                  SMART.jpg_thumb

                  1 Reply Last reply Reply Quote 0
                  • I
                    Iahmad
                    last edited by Jan 15, 2015, 10:24 AM

                    the same issue was with me. before i was using sata 500GB and i also check 320GB but now i am using 40GB IDE but first you check from bios go to device information page there press enter by selecting HD chnage the reading method from auto to LBA . this trick work for me now pfsense is working fine since two weeks.

                    1 Reply Last reply Reply Quote 0
                    • T
                      tarun
                      last edited by Jan 15, 2015, 10:47 AM Jan 15, 2015, 10:42 AM

                      @ishtiaqaj:

                      the same issue was with me. before i was using sata 500GB and i also check 320GB but now i am using 40GB IDE but first you check from bios go to device information page there press enter by selecting HD chnage the reading method from auto to LBA . this trick work for me now pfsense is working fine since two weeks.

                      ishtiaqaj, we are not using IDE hard disk, we are using SSD hard disks and for few weeks our firewall is also working fine but its gives error in between after few weeks.

                      1 Reply Last reply Reply Quote 0
                      • I
                        Iahmad
                        last edited by Jan 16, 2015, 4:47 PM

                        @tarun:

                        @ishtiaqaj:

                        the same issue was with me. before i was using sata 500GB and i also check 320GB but now i am using 40GB IDE but first you check from bios go to device information page there press enter by selecting HD chnage the reading method from auto to LBA . this trick work for me now pfsense is working fine since two weeks.

                        ishtiaqaj, we are not using IDE hard disk, we are using SSD hard disks and for few weeks our firewall is also working fine but its gives error in between after few weeks.

                        dear tarun, you should also check bios hd option there are three option lbs chs and large you should try large mai b it solve your probelm. yes the firewall work someday and than down…

                        1 Reply Last reply Reply Quote 0
                        • S
                          stephenw10 Netgate Administrator
                          last edited by Jan 17, 2015, 11:18 PM

                          The smart parameters all look reasonable.
                          You said you tried multiple drives but were they all identical SSDs? As Jim suggested here and Chris in your other thread it's not unheard of for a whole batch of drives to have firmware bug that your particular setup is triggering.
                          Have you tried running from a standard SATA drive as a test?

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • K
                            keshkesh
                            last edited by Jul 21, 2015, 7:20 AM

                            I have encountered the same problem, when I activated

                            System: Advanced: Miscellaneous
                            Use RAM Disks with default /tmp (40 mb) /var (60 mb) ram disk sizes and
                            with 3hrs periodic frequencies

                            I had to restore configuration to an earlier state without these settings activated via ssh and reboot. (uninstalled havp package & dashboard widget, but I don't think that was the issue)

                            I can finally log back in via web interface.

                            here are some info without these settings set up

                            __________________________________
                            2.1.5-RELEASE (amd64) 
                            built on Mon Aug 25 07:44:45 EDT 2014 
                            FreeBSD 8.3-RELEASE-p16
                            Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz
                            2 CPUs: 1 package(s) x 2 core(s)
                            Memory usage 
                            18% of 4073 MB
                            SWAP usage 
                            0% of 8192 MB
                            Disk usage
                            1% of 443G
                            ____________________________
                            Installed packages:
                            
                            Cron 0.1.9
                            Lightsquid 2.41
                            pfBlocker 1.0.2
                            Sarg 2.3.6_2 pkg v.0.6.3
                            squid3 3.1.20 pkg 2.1.2
                            squidGuard-squid3
                            1.4_4 pkg v.1.9.12
                            _________________________________
                            output of pkg_info
                            
                            bsdinstaller-2.0.2014.0430 BSD Installer mega-package
                            compat6x-amd64-6.4.604000.200810_3 A convenience package to install the compat6x libraries
                            gettext-0.18.1.1    GNU gettext package
                            libexecinfo-1.1_3   A library for inspecting program's backtrace
                            libiconv-1.14       A character set conversion library
                            p5-Digest-HMAC-1.03 Perl5 interface to HMAC Message-Digest Algorithms
                            p5-IO-Socket-SSL-1.52 Perl5 interface to SSL sockets
                            p5-Net-SMTP-TLS-0.12_1 An SMTP client supporting TLS and AUTH
                            p5-Net-SSLeay-1.42  Perl5 interface to SSL
                            perl-5.12.4_3       Practical Extraction and Report Language
                            pkg_info: the package info for package 'pkg' is corrupt
                            pkgconf-0.8.9       Utility to help to configure compiler and linker flags
                            python27-2.7.3_3    An interpreted object-oriented programming language
                            samba36-smbclient-3.6.7 Samba "ftp-like" client
                            talloc-2.0.7        Hierarchical pool based memory allocator
                            tdb-1.2.9,1         Trivial Database
                            
                            
                            1 Reply Last reply Reply Quote 0
                            • S
                              stephenw10 Netgate Administrator
                              last edited by Jul 26, 2015, 4:03 PM

                              There's a good chance the HAVP package could have filled /tmp there. That's normally only applied in embedded (Nano) installs where running HAVP is not recomended.
                              Increase the size of /tmp if that's the case.

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.
                                [[user:consent.lead]]
                                [[user:consent.not_received]]