PfBlockerNG
-
I thought of it too, but I can't find any difference on the firewall rules from when I don't have pfBlockerNG installed and when I do.
Plus the fact that it happens once every two reboots leaves me very confused… -
I thought of it too, but I can't find any difference on the firewall rules from when I don't have pfBlockerNG installed and when I do.
Plus the fact that it happens once every two reboots leaves me very confused…I don't think its an issue with the pfBlockerNG package… Try to post in the OpenVPN forum thread.
May 5 17:43:13 openvpn 30398 TCP/UDP: Socket bind failed on local address [AF_INET]192.168.1.100:1194: Address already in use -
I've got pfSense at home and I wanted to put the lvl1 bluetack list in pfBlockerNG but when I get to that entry, it takes a long time for it to load and can make new DNS queries time out (I'm guessing since it's making changes to Unbound?)
Everything else is working fine. Running on a AMD Athlon
II X2 240 Processor with 3GB of RAM.Do I just need to throw more RAM in there or is there something I can tweak to fix this behavior?
Thanks,
-Nick-
-
I've got pfSense at home and I wanted to put the lvl1 bluetack list in pfBlockerNG but when I get to that entry, it takes a long time for it to load and can make new DNS queries time out (I'm guessing since it's making changes to Unbound?)
Everything else is working fine. Running on a AMD Athlon
II X2 240 Processor with 3GB of RAM.Do I just need to throw more RAM in there or is there something I can tweak to fix this behavior
I guess that Level 1 Bluetack is a subscription list… Not sure how many IPs are in that list? But I assume that its an IP list and not a DNSBL list, so it should be added to the IPv4 Tab. It shouldn't timeout Unbound tho...
-
Hi all,
I’ve just tried to install pfBlockerNG on pfSense 2.3.1_1 and I got error message:pkg: https://pkg.pfsense.org/pfSense_v2_3_1_amd64-pfSense_v2_3_1/All/pfSense-pkg-pfBlockerNG-2.0.17.txz: Not Found FailedAfter quick check I found that repository contains 2.0.14 but not 2.0.17.
-
Hi all,
I’ve just tried to install pfBlockerNG on pfSense 2.3.1_1 and I got error message:pkg: https://pkg.pfsense.org/pfSense_v2_3_1_amd64-pfSense_v2_3_1/All/pfSense-pkg-pfBlockerNG-2.0.17.txz: Not Found FailedAfter quick check I found that repository contains 2.0.14 but not 2.0.17.
Should be fixed now… One of the Devs looked into it...
-
Hope someone can help I have outbound deny selected on the IPV4 list below
Alias Name Alias Description Action Frequency Logging
IBlock pfBlockerNG IBlock Deny_Outbound 04hours enabledPRI1 pfBlockerNG PRI1 Deny_Outbound 01hour enabled
PRI2 pfBlockerNG PRI2 Deny_Outbound 04hours enabled
PRI3 pfBlockerNG PRI3 Deny_Outbound 04hours enabled
SEC1 pfBlockerNG SEC1 Deny_Outbound 04hours enabled
TOR pfBlockerNG TOR Deny_Outbound 04hours enabled
MAIL pfBlockerNG MAIL Deny_Outbound 08hours enabled
Now I want to keep all the listed enabled but i keep getting some good sites blocked like dropbox.com.
Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.
-
Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.
If an IP is getting blocked, then you can either: 1) Suppress the IP from the Alerts Tab 2) Create a new pfBlockerNG alias (Whitelist), and add the IP to the customlist and set the format to "Permit Outbound". Ensure that the "Rule Order" places the Permit Rules, above the Block/Reject Rules.
If a domain is getting blocked by DNSBL, then you need to suppress it from the Alerts Tab.
-
Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.
If an IP is getting blocked, then you can either: 1) Suppress the IP from the Alerts Tab 2) Create a new pfBlockerNG alias (Whitelist), and add the IP to the customlist and set the format to "Permit Outbound". Ensure that the "Rule Order" places the Permit Rules, above the Block/Reject Rules.
If a domain is getting blocked by DNSBL, then you need to suppress it from the Alerts Tab.
Thanks I will try that. :)
-
after i installed this package on a new installation, a error has pop up
Filter Reload
• There were error(s) loading the rules: /tmp/rules.debug:20: cannot define table bogonsv6: Cannot allocate memory - The line in question reads [20]: table <bogonsv6> persist file "/etc/bogonsv6" @ 2016-06-11 23:56:52
any suggestions what its might be ? -
after i installed this package on a new installation, a error has pop up
Filter Reload
• There were error(s) loading the rules: /tmp/rules.debug:20: cannot define table bogonsv6: Cannot allocate memory - The line in question reads [20]: table <bogonsv6> persist file "/etc/bogonsv6" @ 2016-06-11 23:56:52
any suggestions what its might be ?The bogons is handled by the pfSense code not pfBlockerNG. Maybe try to disable and re-enable Bogons to see what that does. The package changes the max table entry in the advanced settings automatically so it shouldn't be that.
-
after i installed this package on a new installation, a error has pop up
Filter Reload
• There were error(s) loading the rules: /tmp/rules.debug:20: cannot define table bogonsv6: Cannot allocate memory - The line in question reads [20]: table <bogonsv6> persist file "/etc/bogonsv6" @ 2016-06-11 23:56:52
any suggestions what its might be ?The bogons is handled by the pfSense code not pfBlockerNG. Maybe try to disable and re-enable Bogons to see what that does. The package changes the max table entry in the advanced settings automatically so it shouldn't be that.
will do it and report back,
can i filter the internet with this package ?
block adult websites ? porn ?
does the package wordt with squad guard and squid 3 ? -
Can someone advice how i can exclude these destination domains please. I have tried the advance rule outbound invert but when i do it locks me out of the firewall interface.
If an IP is getting blocked, then you can either: 1) Suppress the IP from the Alerts Tab 2) Create a new pfBlockerNG alias (Whitelist), and add the IP to the customlist and set the format to "Permit Outbound". Ensure that the "Rule Order" places the Permit Rules, above the Block/Reject Rules.
If a domain is getting blocked by DNSBL, then you need to suppress it from the Alerts Tab.
BBCan- first off, great work. Been using pfblocker for a bit and love it (one of my favorite packages on pfsense.) Second- trying to suppress an internal IP (ie. 192.168.1.xxx). I do not have ANY + sign in the alerts tab to add it to the suppression list. As far as I understand, you can add NATted local IPs to the list right? Even when I modify the alias directly and reload, pfblocker continues to block the packets.
For reference, I am blocking LAN outbound to certain countries and some on WAN too perhaps (not at the box to check.) But regardless, it just seems like my box is not working as it should. I'm running 2.3.1-p5 but I DID upgrade from 2.2.6 with pfblocker still installed (I stupidly didn't uninstall before the big upgrade.)
Any ideas?
-
Trying to suppress an internal IP (ie. 192.168.1.xxx).
I do not have ANY + sign in the alerts tab to add it to the suppression list. As far as I understand, you can add NATted local IPs to the list right? Even when I modify the alias directly and reload, pfblocker continues to block the packets.
You don't suppress Internal IPs.. Suppression is for External IPs and the Suppression Icon is only visible when "suppression" is enabled, and when the External IP is a /32 or /24. Also it won't suppress for Country Blocking…
To have some internal IPs excluded from the Block Rules… Best to use the "Adv. Inbound/Outbound" Rule settings.
-
Trying to suppress an internal IP (ie. 192.168.1.xxx).
I do not have ANY + sign in the alerts tab to add it to the suppression list. As far as I understand, you can add NATted local IPs to the list right? Even when I modify the alias directly and reload, pfblocker continues to block the packets.
You don't suppress Internal IPs.. Suppression is for External IPs and the Suppression Icon is only visible when "suppression" is enabled, and when the External IP is a /32 or /24. Also it won't suppress for Country Blocking…
To have some internal IPs excluded from the Block Rules… Best to use the "Adv. Inbound/Outbound" Rule settings.
Sounds good. Part of me thought that I'd have to adjust the rules and couldn't use the suppression but I figured I'd try.
Thanks again mate. -
pfsense 2.2.6
I use the country lists to pretty much block anything outside of US/CA
I then have a whitelist set up for any exceptions
I am pretty sure that in the past this worked fine.
At some point the whitelist stopped having any effect.
The firewall rules order also seems incorrect in that the whitelist follows the pfb block lists
After poking around in the settings I found that setting the Rule Order to :
pfB_Pass/Match|pfB_Block/Reject|pfSense_Pass/Match
seems to get things working correctly - and the rules are now ordered as expected with the pass rule above the block rules.
Did something change that requires using this rule order rather than the default to get whitelists to work ?
I would have thought that this and the default would have been the same thing as far as whitelisting goes.
Although this works I am concerned that this may have unforeseen consequences. -
pfsense 2.2.6
I use the country lists to pretty much block anything outside of US/CAKeep in mind that you could also just "Permit" the Countries that you want instead of blocking the world…
I am pretty sure that in the past this worked fine.
At some point the whitelist stopped having any effect.
The firewall rules order also seems incorrect in that the whitelist follows the pfb block lists
After poking around in the settings I found that setting the Rule Order to :
pfB_Pass/Match|pfB_Block/Reject|pfSense_Pass/Match
seems to get things working correctly - and the rules are now ordered as expected with the pass rule above the block rules.
Did something change that requires using this rule order rather than the default to get whitelists to work ?
I would have thought that this and the default would have been the same thing as far as whitelisting goes.
Although this works I am concerned that this may have unforeseen consequences.Nothing has changed in that part of the code for awhile…
-
Having a problem getting Bambenek "C2 All Indicator Feed" going.
I have tried to put it in DNSBL but get this in log when update:[ dnsc2allindicatorbambenek ] Downloading update .. 200 OK No Domains FoundAny ideas?
-
Having a problem getting Bambenek "C2 All Indicator Feed" going.
I have tried to put it in DNSBL but get this in log when update:[ dnsc2allindicatorbambenek ] Downloading update .. 200 OK No Domains FoundDNSBL
https://osint.bambenekconsulting.com/feeds/dga-feed.gz
https://osint.bambenekconsulting.com/feeds/c2-dommasterlist.txtIP
https://osint.bambenekconsulting.com/feeds/c2-ipmasterlist.txt -
Thanks, those I use without problem, only for dga-feed.gz I have dga-feed.txt.
The one that gives No Domains Found is:
http://osint.bambenekconsulting.com/feeds/c2-masterlist.txtOr is it not suitable for pfB?
In text editor I see it`s different format then the rest.
