PfBlockerNG

JasonJoel

Thanks. You are right, the screenshot was there. For some reason it took a LONG time to load though (I was on that page for >3 minutes before the screenshot actually appeared…).

And, yeah, I should have realized it couldn't revert.

I have it all installed, configured, and working now. Thanks all for the guidance.

Thanks!

reggie14

@marcelloc:

The pull request needs to be merged by pfsense team before you can use it without any hacks.

Mostly out of curiosity, what does this mean for where this package is in the release process? That is, does the pfsense team do some testing before they merge it? Or do they just do some sort of minimal sanity check through the code?

wcrowder

If I understand correctly, they do an in-depth review of the code. This being a "New" package with a large code base it can take a while. I believe it is in that process now. It is in the pfSense package repository but is waiting for this process to be completed. The "patch", I hate the word "Hack", just allows you to bypass the "compatibility check" to download the package from the pfSense repository before it has gone through this process. It is "Use at your own risk" at the moment. The review process is a good thing. We just have to be patient.

@reggie14:

@marcelloc:

The pull request needs to be merged by pfsense team before you can use it without any hacks.

Mostly out of curiosity, what does this mean for where this package is in the release process? That is, does the pfsense team do some testing before they merge it? Or do they just do some sort of minimal sanity check through the code?

BBcan177

@BBcan177:

I will be submitting a Pull Request for the following :

MaxMind files will be saved to the PBI folder which will make them persist after reboot. (for Nano / Ramdisk installs)

MaxMind archive files in /var/db will be purged after installation to free up some space.

Add MaxMind "Anonymous Proxy and Satellite Providers".

https://github.com/pfsense/pfsense-packages/pull/801

fragged

Why do I occasionally see items on the "Permit" part of the Alerts tab when I have 0 permit rules?


Permit   -   Last 5 Alert Entries.							
Date		IF	Rule			Proto		Source			Destination		CC	List
Feb 2 14:32:59	WAN	pfB_iBlockHijacked (98)	UDP	  	119.186.197.255: 16001	192.168.YY.X: 64284	CN	No Match

When I search my firewall log for the source, nothing pops up. I have logging enabled for all my pass/block/deny rules.

swinn

When pfBlockerNG is enabled, any clients trying to sync with ntpd will fail 99% of the time. When disabled, the sync happens instantaneous. Using the old pfBlocker package, it works normally as well. I have eight IPv4 lists configured for deny inbound. I have the top 20 configured to be an alias which has a rule to block inbound on port 25. Then I have several countries configured for deny inbound. Inbound is set for my WAN. There is no blocking of outbound.

Is anyone else experiencing this?

doktornotor

@fragged:

When I search my firewall log for the source, nothing pops up.

This is not logged to general firewall logs unless configured so (Global Enable Logging).

@swinn:

When pfBlockerNG is enabled, any clients trying to sync with ntpd will fail 99% of the time.
Is anyone else experiencing this?

No. Stop blocking your NTP servers.

fragged

@doktornotor:

@fragged:

When I search my firewall log for the source, nothing pops up.

This is not logged to general firewall logs unless configured so (Global Enable Logging).

Is also enabled.

BBcan177

@swinn:

When pfBlockerNG is enabled, any clients trying to sync with ntpd will fail 99% of the time

MaxMind Country Database is accurate now! :) The old package had two years old Country Data.
I assume that the NTP server is in one of those Countries that you selected.

Look at the "Alerts" Tab, and find the IP that is being blocked. Then create a new "Permit Outbound" alias. You can add the IP to the Custom Text Box at the bottom of this new Alias. This is the recommended method to overcome blocking when "Country Blocking" is occuring.

For all other False Positives, use the Suppression method instead.

BBcan177

@fragged:

Why do I occasionally see items on the "Permit" part of the Alerts tab when I have 0 permit rules?
When I search my firewall log for the source, nothing pops up. I have logging enabled for all my pass/block/deny rules.

I haven't seen this before. But let me know if its repeating…

doktornotor

@BBcan177:

Look at the "Alerts" Tab, and find the IP that is being blocked. Then create a new "Permit Outbound" alias. You can add the IP to the Custom Text Box at the bottom of this new Alias. This is the recommended method to overcome blocking when "Country Blocking" is occuring.

If you are using any of those *.pool.ntp.org things or whatever similar for NTP, you really need some alias with FQDNs for those, otherwise you'll be hunting IPs for quite some time.

LinuxTracker

A couple of notes about my upgrade 1.0 -> 1.01 upgrade. (Xeon amd64 4GB RAM)

My /var/db/aliastables/ were all wiped out.
I followed the steps given by BBcan177 to set it right again -> https://forum.pfsense.org/index.php?topic=86212.msg484133#msg484133

also - A curiosity
The Maxmind AnonProxy A1 list in pfBlockerNG seems more accurate than the one on Maxmind's website.

Example: This IP 63.141.198.54 is A1 (and is in pfBlockerNG).
re: http://www.ip-tracker.org/locator/ip-lookup.php?ip=63.141.198.54
re: https://www.iptomaps.com/country_block/12245

but it isn't on Maxmind's web-list of A1 IPs
https://www.maxmind.com/en/anonymous_proxies

Just an oddity and a welcome one at that.

marcelloc

The pull request is merged. Package is available on list.

doktornotor

@marcelloc:

The pull request is merged. Package is available on list.

BBcan177

@LinuxTracker:

A curiosity
The Maxmind AnonProxy A1 list in pfBlockerNG seems more accurate than the one on Maxmind's website.

Example: This IP 63.141.198.54 is A1 (and is in pfBlockerNG)
but it isn't on Maxmind's web-list of A1 IPs
https://www.maxmind.com/en/anonymous_proxies

I think as this is a "Free" service, that they don't update the Web Site so frequently. The Database is updated the First Tuesday of each month, but I have noticed that it can change before that time.

I checked the Maxmind Database file and it is listed there.

GeoIPCountryWhois.csv:"63.141.198.0","63.141.199.255","1066255872","1066256383","A1","Anonymous Proxy"

BBcan177

@doktornotor:

@marcelloc:

The pull request is merged. Package is available on list.

Yes this pic is worth repeating as I am buying the next Round! Just don't expect me to be in any position to fix any bugs tomorrow! ;D

I have hammered at this package with my troop of loyal Beta Testers (just over 25 of them)… A really big Thanks to those Guys for really helping put the package thru real world testing. Any bugs you guys do find, let me know and I"m sure we can get them resolved. You Beta Testers are the Salt of the Earth kinda guys... Just what Open Source is all about. Hope you guys like the package. Its been fun!

samham

great news!!! thank you BBcan177 and everyone else who worked on this great package.

BBcan177

@wbennett77:

pfBlockerNG v1.0 – Official Release

Thanks to wbennett77 for allowing me to commandeer his First post in this thread …
https://forum.pfsense.org/index.php?topic=86212.msg472670#msg472670

Firemedic46

Noticed pfBlockerng is not showing up in the Dashboard services status Widgets. Not sure how to reload it after modification.

Thanks

doktornotor

It's not a running service, no business in there.