Cant Access web application from OPT1 network

[Abid Zehri]

Hi
I am new user for Pfsence

Wan : xx.xx.xx.xx
Lan:  192.168.0.2
OPT1: 192.168.5.1

I have one web application with IP 192.168.0.99 and is accessible with LAN Network locally but it can not access form OPT1 network i have to access the link from internet

i allow firwall rule to access the network from Lan network to OPT1 network OPT1 to Lan DNS Domain access form OPT1 but this web application not run

can any one help me it urgent

Web application run Live IP on the system

Wan IP : xx.xx.xx.xx.
Lan Ip:192.168.0.99
Gatway : None
DNS: none

Thanks

[kejianshi]

Can you post a pic of both the LAN and OP1 interface firewall rules?

[Abid Zehri]

please see the attachments

[kejianshi]

On the pass rule betweens the LANs you have a little purple "i" there indicating that you made some change to the basic rule.  My guess is that change in the advanced settings is breaking things.

Also, on OPT1 you aren't allowing much.  Might break things

[GroundX]

Since you allow Any traffic on IPv4 and TCP it should work (+ UDP to 192.168.5.0/24).
I think you either have wrong gateway configured or a software firewall on the destination. Or the routing table isn't updated.

[Abid Zehri]

Thanks for your reply Ground x

there is no gatway defined on web application server on private IP 192.168.0.66 this should be a problem ?

[GroundX]

@Abid:

Thanks for your reply Ground x

there is no gatway defined on web application server on private IP 192.168.0.66 this should be a problem ?

Sounds like that, yes  ;)

[KOM]

Yeah, your rules on LAN1 area  bit of a mess.  You should only need something like this:

(Note that I use DMZ instead of LAN2)