Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Captive portal doesn´t work after upgrade to 2.2

    Scheduled Pinned Locked Moved Captive Portal
    23 Posts 4 Posters 5.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      michaelschefczyk
      last edited by

      Dear doktornotor,

      wishing it was that simple: My guest network is on a separate vlan configured as an interface - if lagg0_vlan4 (pls. see ifconfig output below). Unless I do misunderstand this, a vlan configured as an interface does qualify as a separate interface in line for your reply, right? Alternatively, do I need to set a physical interface aside by removing it from lagg0, connecting it to the switch by a separate cable and use it for the capitve portal interface excusively?

      Regards,

      Michael Schefczyk

      $ ifconfig
      igb0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:e9:f6:a2
      inet 192.168.6.4 netmask 0xffffff00 broadcast 192.168.6.255
      inet6 fe80::225:90ff:fee9:f6a2%igb0 prefixlen 64 scopeid 0x1
      inet 192.168.6.2 netmask 0xffffff00 broadcast 192.168.6.255 vhid 1
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
      status: active
      carp: MASTER vhid 1 advbase 1 advskew 100
      igb1: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:e9:f6:a3
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
      status: active
      igb2: flags=8843 <up,broadcast,running,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:f3:8b:82
      inet 172.16.1.79 netmask 0xffffff00 broadcast 172.16.1.255
      inet6 fe80::225:90ff:fef3:8b82%igb2 prefixlen 64 scopeid 0x3
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
      status: active
      igb3: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:f3:8b:83
      inet 192.168.0.4 netmask 0xffffff00 broadcast 192.168.0.255
      inet6 fe80::225:90ff:fef3:8b83%igb3 prefixlen 64 scopeid 0x4
      inet 192.168.0.2 netmask 0xffffff00 broadcast 192.168.0.255 vhid 2
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
      status: active
      carp: MASTER vhid 2 advbase 1 advskew 100
      igb4: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:e9:f6:a3
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
      status: active
      igb5: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:e9:f6:a3
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect (1000baseT <full-duplex>)
      status: active
      pflog0: flags=100 <promisc>metric 0 mtu 33144
      pfsync0: flags=41 <up,running>metric 0 mtu 1500
      pfsync: syncdev: igb2 syncpeer: 172.16.1.78 maxupd: 128 defer: on
      syncok: 1
      lo0: flags=8049 <up,loopback,running,multicast>metric 0 mtu 16384
      options=600003 <rxcsum,txcsum,rxcsum_ipv6,txcsum_ipv6>inet 127.0.0.1 netmask 0xff000000
      inet6 ::1 prefixlen 128
      inet6 fe80::1%lo0 prefixlen 64 scopeid 0x9
      nd6 options=21 <performnud,auto_linklocal>enc0: flags=0<> metric 0 mtu 1536
      nd6 options=21 <performnud,auto_linklocal>lagg0: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=400bb <rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso>ether 00:25:90:e9:f6:a3
      inet6 fe80::225:90ff:fee9:f6a3%lagg0 prefixlen 64 scopeid 0xb
      inet 192.168.1.79 netmask 0xffffff00 broadcast 192.168.1.255
      inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255 vhid 3
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect
      status: active
      carp: MASTER vhid 3 advbase 1 advskew 100
      laggproto lacp lagghash l2,l3,l4
      laggport: igb5 flags=1c <active,collecting,distributing>laggport: igb4 flags=1c <active,collecting,distributing>laggport: igb1 flags=1c <active,collecting,distributing>lagg0_vlan4: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
      options=3 <rxcsum,txcsum>ether 00:25:90:e9:f6:a3
      inet6 fe80::225:90ff:fee9:f6a3%lagg0_vlan4 prefixlen 64 scopeid 0xc
      inet 192.168.4.79 netmask 0xffffff00 broadcast 192.168.4.255
      inet 192.168.4.1 netmask 0xffffff00 broadcast 192.168.4.255 vhid 4
      nd6 options=21 <performnud,auto_linklocal>media: Ethernet autoselect
      status: active
      vlan: 4 vlanpcp: 0 parent interface: lagg0
      carp: MASTER vhid 4 advbase 1 advskew 100
      ovpns1: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
      options=80000 <linkstate>inet6 fe80::225:90ff:fee9:f6a2%ovpns1 prefixlen 64 scopeid 0xd
      inet 192.168.9.1 –> 192.168.9.2 netmask 0xffffffff
      nd6 options=21 <performnud,auto_linklocal>Opened by PID 24764
      ovpns2: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
      options=80000 <linkstate>inet6 fe80::225:90ff:fee9:f6a2%ovpns2 prefixlen 64 scopeid 0xe
      inet 192.168.10.1 --> 192.168.10.2 netmask 0xffffffff
      nd6 options=21 <performnud,auto_linklocal>Opened by PID 28882
      ovpns3: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
      options=80000 <linkstate>inet6 fe80::225:90ff:fee9:f6a2%ovpns3 prefixlen 64 scopeid 0xf
      inet 192.168.18.1 --> 192.168.18.2 netmask 0xffffffff
      nd6 options=21 <performnud,auto_linklocal>Opened by PID 33508
      ovpns4: flags=8051 <up,pointopoint,running,multicast>metric 0 mtu 1500
      options=80000 <linkstate>inet6 fe80::225:90ff:fee9:f6a2%ovpns4 prefixlen 64 scopeid 0x10
      inet 192.168.19.1 --> 192.168.19.2 netmask 0xffffffff
      nd6 options=21 <performnud,auto_linklocal>Opened by PID 37582</performnud,auto_linklocal></linkstate></up,pointopoint,running,multicast></performnud,auto_linklocal></linkstate></up,pointopoint,running,multicast></performnud,auto_linklocal></linkstate></up,pointopoint,running,multicast></performnud,auto_linklocal></linkstate></up,pointopoint,running,multicast></performnud,auto_linklocal></rxcsum,txcsum></up,broadcast,running,promisc,simplex,multicast></active,collecting,distributing></active,collecting,distributing></active,collecting,distributing></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></performnud,auto_linklocal></performnud,auto_linklocal></rxcsum,txcsum,rxcsum_ipv6,txcsum_ipv6></up,loopback,running,multicast></up,running></promisc></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast></full-duplex></performnud,auto_linklocal></rxcsum,txcsum,vlan_mtu,vlan_hwtagging,jumbo_mtu,vlan_hwcsum,vlan_hwtso></up,broadcast,running,promisc,simplex,multicast>

      1 Reply Last reply Reply Quote 0
      • D
        doktornotor Banned
        last edited by

        @michaelschefczyk:

        wishing it was that simple: My guest network is on a separate vlan configured as an interface - if lagg0_vlan4 (pls. see ifconfig output below).

        And what's that CARP IP doing there?

        lagg0_vlan4: flags=8943 <up,broadcast,running,promisc,simplex,multicast>metric 0 mtu 1500
          inet 192.168.4.79 netmask 0xffffff00 broadcast 192.168.4.255
          inet 192.168.4.1 netmask 0xffffff00 broadcast 192.168.4.255 vhid 4</up,broadcast,running,promisc,simplex,multicast>

        Really, this was said already a couple of times on this thread:

        • https://forum.pfsense.org/index.php?topic=87991.msg485907#msg485907
        • https://forum.pfsense.org/index.php?topic=87991.msg485987#msg485987

        Again, nuke CARP from the interface that you have CP running on.

        1 Reply Last reply Reply Quote 0
        • M
          michaelschefczyk
          last edited by

          Dear doktornotor,

          Thank you very much. I can read the text about CARP changes in 2.2, but I am unable to make sense out of it - probably it is not myself alone.

          By my understanding, the CP guest network is something like the LAN to guests. The pfSense 2.1 draft book lists the following CARP example on page 473:

          Table 25.2. LAN IP Address Assignments
          IP Address Usage
          192.168.1.1 CARP shared IP
          192.168.1.2 Primary firewall LAN IP
          192.168.1.3 Secondary firewall LAN IP

          This was my world for a long time. Translated to my CP it meant that 192.168.4.1 was the router (Gateway, DNS) for guests. And that address was sometimes held by the primary and sometimes by the secondary firewall. Guests would not have to know about that. In my translation, 192.168.1.2 was 192.168.4.78 and 192.168.1.3 was 192.168.4.79.

          Please let me know HOW I can move the CARP IP elsewhere. I have tried to understand that for a long time, but I cannot solve it intuitively and I cannot find documentation. To which interface would I move the CARP IP? Then, how could guests reach the CARP IP if it it was not on their networks interface anymore? The aim should still be that guests have one Gateway and DNS IP, regardless which firewall is master at a given point in time. Ideally, that address would be 192.168.4.1.

          My CARP setting is enclosed as a jpg screenshot. DMESG output is attached below.

          Thank you very much for your efforts!

          Regards,

          Michael Schefczyk

          $ dmesg | less
          Copyright © 1992-2014 The FreeBSD Project.
          Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
          The Regents of the University of California. All rights reserved.
          FreeBSD is a registered trademark of The FreeBSD Foundation.
          FreeBSD 10.1-RELEASE-p4 #0 36d7dec(releng/10.1)-dirty: Thu Jan 22 15:12:35 CST 2015
              root@pfsense-22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64
          FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
          CPU: Intel(R) Atom(TM) CPU  C2758  @ 2.40GHz (2400.06-MHz K8-class CPU)
            Origin = "GenuineIntel"  Id = 0x406d8  Family = 0x6  Model = 0x4d  Stepping = 8
            Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x43d8e3bf <sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,rdrand>AMD Features=0x28100800 <syscall,nx,rdtscp,lm>AMD Features2=0x101 <lahf,prefetch>Structured Extended Features=0x2282 <tscadj,smep,erms>VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
            TSC: P-state invariant, performance statistics
          real memory  = 17179869184 (16384 MB)
          avail memory = 16567734272 (15800 MB)
          Event timer "LAPIC" quality 600
          ACPI APIC Table: <intel  tiano ="">FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
          FreeBSD/SMP: 1 package(s) x 8 core(s)
          cpu0 (BSP): APIC ID:  0
          cpu1 (AP): APIC ID:  2
          cpu2 (AP): APIC ID:  4
          cpu3 (AP): APIC ID:  6
          cpu4 (AP): APIC ID:  8
          cpu5 (AP): APIC ID: 10
          cpu6 (AP): APIC ID: 12
          cpu7 (AP): APIC ID: 14
          ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20130823/tbfadt-682)
          ioapic0 <version 2.0="">irqs 0-23 on motherboard
          wlan: mac acl policy registered
          ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
          ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
          module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80606c30, 0) error 1
          ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
          ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
          module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff80606ce0, 0) error 1
          ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.
          ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
          module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80606d90, 0) error 1
          iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
          iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
          module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff8062e400, 0) error 1
          iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
          iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
          module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff8062e4b0, 0) error 1
          iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/.
          iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
          module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff8062e560, 0) error 1
          random: <software, yarrow="">initialized
          module_register_init: MOD_LOAD (vesa, 0xffffffff80fb8b00, 0) error 19
          kbd0 at kbdmux0
          cryptosoft0: <software crypto="">on motherboard
          padlock0: No ACE support.
          acpi0: <alaska a="" m="" i="">on motherboard
          acpi0: Power Button (fixed)
          cpu0: <acpi cpu="">on acpi0
          cpu1: <acpi cpu="">on acpi0
          cpu2: <acpi cpu="">on acpi0
          cpu3: <acpi cpu="">on acpi0
          cpu4: <acpi cpu="">on acpi0
          cpu5: <acpi cpu="">on acpi0
          cpu6: <acpi cpu="">on acpi0
          cpu7: <acpi cpu="">on acpi0
          hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0
          Timecounter "HPET" frequency 14318180 Hz quality 950
          Event timer "HPET" frequency 14318180 Hz quality 350
          Event timer "HPET1" frequency 14318180 Hz quality 340
          Event timer "HPET2" frequency 14318180 Hz quality 340
          atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0
          atrtc0: Warning: Couldn't map I/O.
          Event timer "RTC" frequency 32768 Hz quality 0
          attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0
          Timecounter "i8254" frequency 1193182 Hz quality 0
          Event timer "i8254" frequency 1193182 Hz quality 100
          Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
          acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
          pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
          pci0: <acpi pci="" bus="">on pcib0
          pcib1: <acpi pci-pci="" bridge="">mem 0xdf6e0000-0xdf6fffff irq 16 at device 1.0 on pci0
          pci1: <acpi pci="" bus="">on pcib1
          pcib2: <acpi pci-pci="" bridge="">at device 0.0 on pci1
          pci2: <acpi pci="" bus="">on pcib2
          vgapci0: <vga-compatible display="">port 0xd000-0xd07f mem 0xde000000-0xdeffffff,0xdf000000-0xdf01ffff irq 16 at device 0.0 on pci2
          vgapci0: Boot video device
          pcib3: <acpi pci-pci="" bridge="">mem 0xdf6c0000-0xdf6dffff irq 16 at device 2.0 on pci0
          pci3: <acpi pci="" bus="">on pcib3
          xhci0: <xhci (generic)="" usb="" 3.0="" controller="">mem 0xdf500000-0xdf501fff irq 17 at device 0.0 on pci3
          xhci0: 64 byte context size.
          usbus0 on xhci0
          pcib4: <acpi pci-pci="" bridge="">mem 0xdf6a0000-0xdf6bffff irq 20 at device 3.0 on pci0
          pci4: <acpi pci="" bus="">on pcib4
          igb0: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xc020-0xc03f mem 0xdf200000-0xdf2fffff,0xdf404000-0xdf407fff irq 22 at device 0.0 on pci4
          igb0: Using MSIX interrupts with 9 vectors
          igb0: Bound queue 0 to cpu 0
          igb0: Bound queue 1 to cpu 1
          igb0: Bound queue 2 to cpu 2
          igb0: Bound queue 3 to cpu 3
          igb0: Bound queue 4 to cpu 4
          igb0: Bound queue 5 to cpu 5
          igb0: Bound queue 6 to cpu 6
          igb0: Bound queue 7 to cpu 7
          igb1: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xc000-0xc01f mem 0xdf100000-0xdf1fffff,0xdf400000-0xdf403fff irq 23 at device 0.1 on pci4
          igb1: Using MSIX interrupts with 9 vectors
          igb1: Bound queue 0 to cpu 0
          igb1: Bound queue 1 to cpu 1
          igb1: Bound queue 2 to cpu 2
          igb1: Bound queue 3 to cpu 3
          igb1: Bound queue 4 to cpu 4
          igb1: Bound queue 5 to cpu 5
          igb1: Bound queue 6 to cpu 6
          igb1: Bound queue 7 to cpu 7
          pci0: <processor>at device 11.0 (no driver attached)
          pci0: <base peripheral,="" iommu=""> at device 15.0 (no driver attached)
          igb2: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe0c0-0xe0df mem 0xdf660000-0xdf67ffff,0xdf70c000-0xdf70ffff irq 20 at device 20.0 on pci0
          igb2: Using MSIX interrupts with 9 vectors
          igb2: Bound queue 0 to cpu 0
          igb2: Bound queue 1 to cpu 1
          igb2: Bound queue 2 to cpu 2
          igb2: Bound queue 3 to cpu 3
          igb2: Bound queue 4 to cpu 4
          igb2: Bound queue 5 to cpu 5
          igb2: Bound queue 6 to cpu 6
          igb2: Bound queue 7 to cpu 7
          igb3: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe0a0-0xe0bf mem 0xdf640000-0xdf65ffff,0xdf708000-0xdf70bfff irq 21 at device 20.1 on pci0
          igb3: Using MSIX interrupts with 9 vectors
          igb3: Bound queue 0 to cpu 0
          igb3: Bound queue 1 to cpu 1
          igb3: Bound queue 2 to cpu 2
          igb3: Bound queue 3 to cpu 3
          igb3: Bound queue 4 to cpu 4
          igb3: Bound queue 5 to cpu 5
          igb3: Bound queue 6 to cpu 6
          igb3: Bound queue 7 to cpu 7
          igb4: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe080-0xe09f mem 0xdf620000-0xdf63ffff,0xdf704000-0xdf707fff irq 22 at device 20.2 on pci0
          igb4: Using MSIX interrupts with 9 vectors
          igb4: Bound queue 0 to cpu 0
          igb4: Bound queue 1 to cpu 1
          igb4: Bound queue 2 to cpu 2
          igb4: Bound queue 3 to cpu 3
          igb4: Bound queue 4 to cpu 4
          igb4: Bound queue 5 to cpu 5
          igb4: Bound queue 6 to cpu 6
          igb4: Bound queue 7 to cpu 7
          igb5: <intel(r) 1000="" pro="" network="" connection="" version="" -="" 2.4.0="">port 0xe060-0xe07f mem 0xdf600000-0xdf61ffff,0xdf700000-0xdf703fff irq 23 at device 20.3 on pci0
          igb5: Using MSIX interrupts with 9 vectors
          igb5: Bound queue 0 to cpu 0
          igb5: Bound queue 1 to cpu 1
          igb5: Bound queue 2 to cpu 2
          igb5: Bound queue 3 to cpu 3
          igb5: Bound queue 4 to cpu 4
          igb5: Bound queue 5 to cpu 5
          igb5: Bound queue 6 to cpu 6
          igb5: Bound queue 7 to cpu 7
          ehci0: <intel avoton="" usb="" 2.0="" controller="">mem 0xdf717000-0xdf7173ff irq 23 at device 22.0 on pci0
          usbus1: EHCI version 1.0
          usbus1 on ehci0
          ahci0: <intel avoton="" ahci="" sata="" controller="">port 0xe150-0xe157,0xe140-0xe143,0xe130-0xe137,0xe120-0xe123,0xe040-0xe05f mem 0xdf716000-0xdf7167ff irq 19 at device 23.0 on pci0
          ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
          ahcich0: <ahci channel="">at channel 0 on ahci0
          ahcich1: <ahci channel="">at channel 1 on ahci0
          ahcich2: <ahci channel="">at channel 2 on ahci0
          ahcich3: <ahci channel="">at channel 3 on ahci0
          ahci1: <intel avoton="" ahci="" sata="" controller="">port 0xe110-0xe117,0xe100-0xe103,0xe0f0-0xe0f7,0xe0e0-0xe0e3,0xe020-0xe03f mem 0xdf715000-0xdf7157ff irq 19 at device 24.0 on pci0
          ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier not supported
          ahcich4: <ahci channel="">at channel 0 on ahci1
          ahcich5: <ahci channel="">at channel 1 on ahci1
          isab0: <pci-isa bridge="">at device 31.0 on pci0
          isa0: <isa bus="">on isab0
          uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
          uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
          orm0: <isa option="" roms="">at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff on isa0
          sc0: <system console="">at flags 0x100 on isa0
          sc0: CGA <16 virtual consoles, flags=0x300>
          vga0: <generic isa="" vga="">at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
          ppc0: cannot reserve I/O port range
          est0: <enhanced speedstep="" frequency="" control="">on cpu0
          p4tcc0: <cpu frequency="" thermal="" control="">on cpu0
          est1: <enhanced speedstep="" frequency="" control="">on cpu1
          p4tcc1: <cpu frequency="" thermal="" control="">on cpu1
          est2: <enhanced speedstep="" frequency="" control="">on cpu2
          p4tcc2: <cpu frequency="" thermal="" control="">on cpu2
          est3: <enhanced speedstep="" frequency="" control="">on cpu3
          p4tcc3: <cpu frequency="" thermal="" control="">on cpu3
          est4: <enhanced speedstep="" frequency="" control="">on cpu4
          p4tcc4: <cpu frequency="" thermal="" control="">on cpu4
          est5: <enhanced speedstep="" frequency="" control="">on cpu5
          p4tcc5: <cpu frequency="" thermal="" control="">on cpu5
          est6: <enhanced speedstep="" frequency="" control="">on cpu6
          p4tcc6: <cpu frequency="" thermal="" control="">on cpu6
          est7: <enhanced speedstep="" frequency="" control="">on cpu7
          p4tcc7: <cpu frequency="" thermal="" control="">on cpu7
          Timecounters tick every 1.000 msec
          IPsec: Initialized Security Association Processing.
          random: unblocking device.
          usbus0: 5.0Gbps Super Speed USB v3.0
          usbus1: 480Mbps High Speed USB v2.0
          ugen1.1: <intel>at usbus1
          uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1
          ugen0.1: <0x1912> at usbus0
          uhub1: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
          uhub1: 8 ports with 8 removable, self powered
          uhub0: 8 ports with 8 removable, self powered
          ugen1.2: <vendor 0x8087="">at usbus1
          uhub2: <vendor 2="" 9="" 0x8087="" product="" 0x07db,="" class="" 0,="" rev="" 2.00="" 0.02,="" addr="">on usbus1
          uhub2: 4 ports with 4 removable, self powered
          ugen1.3: <american power="" conversion="">at usbus1
          ugen1.4: <vendor 0x0000="">at usbus1
          uhub3: <vendor 4="" 9="" 0x0000="" product="" 0x0001,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus1
          uhub3: 4 ports with 3 removable, self powered
          ugen1.5: <vendor 0x0557="">at usbus1
          ukbd0: <vendor 0="" 5="" 0x0557="" product="" 0x2419,="" class="" 0,="" rev="" 1.10="" 1.00,="" addr="">on usbus1
          kbd1 at ukbd0
          ada0 at ahcich4 bus 0 scbus4 target 0 lun 0
          ada0: <hgst hts541010a9e680="" ja0oa560="">ATA-8 SATA 3.x device
          ada0: Serial Number JA10001F1PP8AM
          ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
          ada0: Command Queueing enabled
          ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
          ada0: Previously was known as ad12
          ada1 at ahcich5 bus 0 scbus5 target 0 lun 0
          ada1: <hgst hts541010a9e680="" ja0oa560="">ATA-8 SATA 3.x device
          ada1: Serial Number JA10001F1RA14N
          ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
          ada1: Command Queueing enabled
          ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
          ada1: Previously was known as ad14
          SMP: AP CPU #3 Launched!
          SMP: AP CPU #1 Launched!
          SMP: AP CPU #6 Launched!
          SMP: AP CPU #4 Launched!
          SMP: AP CPU #2 Launched!
          SMP: AP CPU #7 Launched!
          SMP: AP CPU #5 Launched!
          Timecounter "TSC-low" frequency 1200028632 Hz quality 1000
          GEOM_MIRROR: Device mirror/pfSenseMirror launched (2/2).
          Trying to mount root from ufs:/dev/mirror/pfSenseMirrors1a [rw]…
          padlock0: No ACE support.
          aesni0: <aes-cbc,aes-xts,aes-gcm>on motherboard
          lagg0: IPv6 addresses on igb1 have been removed before adding it as a member to prevent IPv6 address scope violation.
          lagg0: link state changed to DOWN
          lagg0: IPv6 addresses on igb4 have been removed before adding it as a member to prevent IPv6 address scope violation.
          lagg0: IPv6 addresses on igb5 have been removed before adding it as a member to prevent IPv6 address scope violation.
          vlan0: changing name to 'lagg0_vlan4'
          igb0: promiscuous mode enabled
          carp: demoted by 240 to 240 (interface down)
          igb3: promiscuous mode enabled
          carp: demoted by 240 to 480 (interface down)
          igb5: promiscuous mode enabled
          igb4: promiscuous mode enabled
          igb1: promiscuous mode enabled
          lagg0: promiscuous mode enabled
          carp: demoted by 240 to 720 (interface down)
          lagg0_vlan4: promiscuous mode enabled
          carp: demoted by 240 to 960 (interface down)
          carp: demoted by 240 to 1200 (pfsync bulk start)
          igb4: link state changed to UP
          carp: VHID 3@lagg0: INIT -> BACKUP
          carp: demoted by -240 to 960 (interface up)
          lagg0: link state changed to UP
          carp: VHID 4@lagg0_vlan4: INIT -> BACKUP
          carp: demoted by -240 to 720 (interface up)
          lagg0_vlan4: link state changed to UP
          igb5: link state changed to UP
          tun1: changing name to 'ovpns1'
          tun2: changing name to 'ovpns2'
          carp: VHID 2@igb3: INIT -> BACKUP
          carp: demoted by -240 to 480 (interface up)
          igb3: link state changed to UP
          tun3: changing name to 'ovpns3'
          tun4: changing name to 'ovpns4'
          carp: VHID 1@igb0: INIT -> BACKUP
          carp: demoted by -240 to 240 (interface up)
          igb0: link state changed to UP
          pflog0: promiscuous mode enabled
          ovpns1: link state changed to UP
          ovpns2: link state changed to UP
          ovpns4: link state changed to UP
          ovpns3: link state changed to UP
          igb2: link state changed to UP
          carp: demoted by -240 to 0 (pfsync bulk done)
          carp: VHID 1@igb0: BACKUP -> MASTER (preempting a slower master)
          carp: VHID 2@igb3: BACKUP -> MASTER (preempting a slower master)
          carp: VHID 4@lagg0_vlan4: BACKUP -> MASTER (master down)
          carp: VHID 3@lagg0: BACKUP -> MASTER (master down)
          igb1: link state changed to UP
          carp: demoted by 240 to 240 (send error 50 on lagg0)
          ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled
          DUMMYNET 0 with IPv6 initialized (100409)
          load_dn_sched dn_sched FIFO loaded
          load_dn_sched dn_sched QFQ loaded
          load_dn_sched dn_sched RR loaded
          load_dn_sched dn_sched WF2Q+ loaded
          load_dn_sched dn_sched PRIO loaded

          ![CARP Secondary.jpg](/public/imported_attachments/1/CARP Secondary.jpg)
          ![CARP Secondary.jpg_thumb](/public/imported_attachments/1/CARP Secondary.jpg_thumb)</aes-cbc,aes-xts,aes-gcm></hgst></hgst></vendor></vendor></vendor></vendor></american></vendor></vendor></intel></intel></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></cpu></enhanced></generic></system></isa></isa></pci-isa></ahci></ahci></intel></ahci></ahci></ahci></ahci></intel></intel></intel(r)></intel(r)></intel(r)></intel(r)></processor></intel(r)></intel(r)></acpi></acpi></xhci></acpi></acpi></vga-compatible></acpi></acpi></acpi></acpi></acpi></acpi></at></at></high></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></alaska></software></software,></version></intel ></tscadj,smep,erms></lahf,prefetch></syscall,nx,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,est,tm2,ssse3,cx16,xtpr,pdcm,sse4.1,sse4.2,movbe,popcnt,tscdlt,aesni,rdrand></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.