Wireless stops working, won't return until reboot, logs say stuck beacon + more
-
Mar 5 11:50:47 kernel: ath0: ath_reset: unable to reset hardware; hal status 14 Mar 5 11:50:47 kernel: ath0: stuck beacon; resetting (bmiss count 4)
I am getting this over and over in my system logs.
Is there anything I can look at to get more information or a known fix? -
Try 2.2.1 snapshots. (Not the 04-Mar-2015 ones, they are apparently incomplete, but 02-Mar-2015 should be fine.)
http://snapshots.pfsense.org/FreeBSD_releng/10.1/amd64/pfSense_RELENG_2_2/updates/
http://snapshots.pfsense.org/FreeBSD_releng/10.1/i386/pfSense_RELENG_2_2/updates/Other than that, with no information about the WLAN card model, relevant settings or whatnot, you probably won't see much advise here.
-
Other than that, with no information about the WLAN card model, relevant settings or whatnot, you probably won't see much advise here.
Is there a way to get the model from within PFSense. I do not recall what was included when I originally built the box.
As far as settings, it's in AP mode, g/n mode, wpa2.When this happens it stops broadcasting at all.
-
Is there a way to get the model from within PFSense. I do not recall what was included when I originally built the box.
pciconf -lv
-
ath0@pci0:7:0:0: class=0x028000 card=0x10891a3b chip=0x002b168c rev=0x01 hdr=0x00 class = network
Are there any other settings that may be relevant?
-
Should be AR9285. As said above, try the snapshots, they have latest FreeBSD 11 ath drivers.