Squid3 Setup questions

pollardhimself

I've gotten squid3 to work for a single webserver as soon as I enable the second one and configure the mappings I start getting potential dns rebind errors and squid cache errors. Where am i going wrong?

fileserver.domain.com 192.168.38.4
actionlist.domain.com 192.168.38.4

maxpro.domain.com 192.168.38.3

hvac.domain.com 192.168.38.2

PfSense Version 2.1.5-RELEASE (i386)
SQUID3 Version 3.1.20 pkg 2.1.2

General.JPG_thumb

web.JPG_thumb

AC.JPG_thumb

FileServer.JPG_thumb

Maxpro.JPG_thumb

Rule.JPG_thumb

pollardhimself

Where am I going wrong? Can you not have all the webservers running on port 80?

pollardhimself

I've also tired forwarding it to the loopback address but my second webserver it inaccessible. I get this error

And no matter what I do only the 1st web server only works even if I disable the 1st and enable the second I get nothing.

Error.PNG_thumb

pollardhimself

After uninstalling installing round and round I finally got it working. :)

I believe there's and issue if you ad your 1st webserver then add 2 mapping's right away it wont allow any other connections to work. I had to add 1 webserver at a time and 1 mapping at a time then go back and add the second mapping.