OpenVPN Multiple Site-to-multiSites routing
-
thank you jdp0418
problem resolved all is working .
have same requirement here, could u share u'r configuration ?
-
is it possible to use the same configuration explained in the example, but using preshared key instead certificates?
-
Bump!
I too have this same question.
I am using PEER to PEER with preshared key. A second connection to the server never generates an entry in the server the two seem to hack each other (when on is up the other is down) so I went to a separate Server for each client connection too.
I used different TUNNEL Ip's if that matters, 172.16 /24 and 172.17/24 for the tunnel ips.
Anyway with my multiple Servers at site A, I have established both client connections, to sites B and C. A to B works fine and I can ping and both directions from A->B and B->A fine. However I CANNOT do the same for A->C or C->A!!!
Can not figure it out. All Client settings ate the same except for those specific to the client.
What would cause this? I can ping from PFSENSE console at site C to ip's at site A, but from any PC at site C I cannot ping anything at site A.
Rules look fine, again everthing is IDENTICAL in Clients/Server settings for B and C. Cant figure it out!
Thanks,
MP