Squid3, c-icap, clamd, only https works

[stegfeld]

hi,

due to some issues after updating from 2.1.5 to 2.2.2 I newly installed 2.2.2 and restored my config.
after that I didn't get HAVP running, so I tried to use c-icap+clamd of the squid package..
I followed the steps shown in http://taste-of-it.de/pfsense-squid-als-transparenter-proxy-mit-antivirus-funktion-fuer-http/

now if I enable antivirus, only https pages are reachable, if I try any http page, I get an c icap configuration error c-icap-config not found

[2.2.2-RELEASE][admin@pfsense.local]/root: tail -f /var/log/clamav/freshclam.log 
WARNING: Local version: 0.98.6 Recommended version: 0.98.7
DON'T PANIC! Read http://www.clamav.net/support/faq
Downloading main.cvd [100%]
main.cvd updated (version: 55, sigs: 2424225, f-level: 60, builder: neo)
Downloading daily.cvd [100%]
daily.cvd updated (version: 20445, sigs: 1385980, f-level: 63, builder: neo)
Downloading bytecode.cvd [100%]
bytecode.cvd updated (version: 254, sigs: 45, f-level: 63, builder: anvilleg)
Database updated (3810250 signatures) from database.clamav.net (IP: 193.1.193.64)
WARNING: Clamd was NOT notified: Can't connect to clamd through /var/run/clamav/clamd.sock: No such file or directory

[2.2.2-RELEASE][admin@pfsense.local]/root: tail -f /var/log/clamav/clamd.log 
Set stacksize to 2162688
No stats for Database check - forcing reload
Reading databases from /var/db/clamav
Database correctly reloaded (3804677 signatures)
SelfCheck: Database status OK.
SelfCheck: Database status OK.
SelfCheck: Database status OK.
Reading databases from /var/db/clamav
Database correctly reloaded (3804677 signatures)
SelfCheck: Database status OK.

[entropywrench]

Same problem here, been working on this a few days with no result.  The fixes posted for 2.1 don't apply.

did you ever figure out how to get this going?

Edit –-

I was able to get AV with squid 3 to work from this post:

https://forum.pfsense.org/index.php?topic=91362.0