Hidemyass



  • Salve,
    ho pfsense 2.1.5-RELEASE (amd64) e sto cercando (invano) di collegarmi alla VPN di hydemyass. Ho seguito questa guida, ma proprio non ne vengo a capo. Quando la VPN si collega, non riesco più a navigare. In System -> General setup, i DNS hanno il gateway della WAN. In Firewall -> NAT -> Outbound  ho messo Manual Outbound NAT rule generation come suggerito qui.
    Continuo ad avere lo stesso problema.

    Grazie



  • Log di openvpn

    May 18 19:32:22	pfSense openvpn[31930]: PUSH: Received control message: 'PUSH_REPLY,topology subnet,route-gateway 10.200.0.1,dhcp-option DNS 208.67.222.222,dhcp-option DNS 208.67.220.220,redirect-gateway def1,ifconfig 10.200.1.118 255.255.252.0'
    May 18 19:32:22	pfSense openvpn[31930]: OPTIONS IMPORT: --ifconfig/up options modified
    May 18 19:32:22	pfSense openvpn[31930]: OPTIONS IMPORT: route options modified
    May 18 19:32:22	pfSense openvpn[31930]: OPTIONS IMPORT: route-related options modified
    May 18 19:32:22	pfSense openvpn[31930]: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified
    May 18 19:32:22	pfSense openvpn[31930]: ROUTE_GATEWAY 192.168.0.254
    May 18 19:32:22	pfSense openvpn[31930]: TUN/TAP device ovpnc1 exists previously, keep at program end
    May 18 19:32:22	pfSense openvpn[31930]: TUN/TAP device /dev/tun1 opened
    May 18 19:32:22	pfSense openvpn[31930]: ioctl(TUNSIFMODE): Device busy: Device busy (errno=16)
    May 18 19:32:22	pfSense openvpn[31930]: do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=0
    May 18 19:32:22	pfSense openvpn[31930]: /sbin/ifconfig ovpnc1 10.200.1.118 10.200.1.118 mtu 1500 netmask 255.255.252.0 up
    May 18 19:32:22	pfSense openvpn[31930]: /sbin/route add -net 10.200.0.0 10.200.1.118 255.255.252.0
    May 18 19:32:22	pfSense openvpn[31930]: /usr/local/sbin/ovpn-linkup ovpnc1 1500 1543 10.200.1.118 255.255.252.0 init
    May 18 19:32:22	pfSense openvpn[31930]: /sbin/route add -net 104.224.1.2 192.168.0.254 255.255.255.255
    May 18 19:32:22	pfSense openvpn[31930]: /sbin/route add -net 0.0.0.0 10.200.0.1 128.0.0.0
    May 18 19:32:22	pfSense openvpn[31930]: /sbin/route add -net 128.0.0.0 10.200.0.1 128.0.0.0
    May 18 19:32:22	pfSense openvpn[31930]: Initialization Sequence Completed
    

    Outbound mappings

    WAN	 	127.0.0.0/8	*	*	500	WAN address	*	YES	
    WAN	 	127.0.0.0/8	*	*	*	WAN address	*	NO
    WAN	 	192.168.1.0/24	*	*	500	WAN address	*	YES
    WAN	 	192.168.1.0/24	*	*	*	WAN address	*	NO
    

    Ip gateway

    192.168.0.254
    

    Ip pfsense

    192.168.1.1
    


  • Ho risolto aggiungendo questa regola NAT

    HMA  	192.168.1.0/24	*	*	*	HMA address	*	NO