FreePBX



  • Hi

    I know there are a lot of threads about this but after reading some of them I have not find the answer, is there some body with some advice, this is what I have

    WAN:10.0.3.1
    LAN:192.168.1.1
    DMZ:10.0.10.1

    My FreePBX is in the DMZ and I have a NAT configuration for port 5060 to 5080 and 10000 to 20000 to the PBX, I can get connected but no audio, also some times takes a lot of time to get connected.

    Any advice will be apreciated.



  • Hello, what do you have on sip.conf and sip_nat.conf ?


Log in to reply