USB WiFi adapter problem
-
Hello.
I'm trying to configure Wifi on pfSense 2.2.3.
I have added to loader.conf.local:if_run_load="YES"
runfw_load="YES"Then I have USB WiFi adapter (HAMA rt2870) connected to pfSense.
The USB WiFi adapter has been detected in the (assign) Interface.
This is the output of the pfsense command # dmesg:$ dmesg Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p13 #0 c77d1b2(releng/10.1)-dirty: Tue Jun 23 17:09:45 CDT 2015 root@pfs22-i386-builder:/usr/obj.i386/usr/pfSensesrc/src/sys/pfSense_wrap_vga.10.i386 i386 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1600.09-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x106c2 Family = 0x6 Model = 0x1c Stepping = 2 Features=0xbfe9fbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x40c39d <sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,xtpr,pdcm,movbe>AMD Features=0x100000 <nx>AMD Features2=0x1 <lahf>TSC: P-state invariant, performance statistics real memory = 1064173568 (1014 MB) avail memory = 1007480832 (960 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <intelr awrdacpi=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <version 2.0=""> irqs 0-23 on motherboard ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc08136b0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc0813760, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc0813810, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc083be40, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc083bef0, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc083bfa0, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 random: <software, yarrow=""> initialized cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <intelr awrdacpi=""> on motherboard acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 3f5e0000 (3) failed cpu0: <acpi cpu=""> on acpi0 cpu1: <acpi cpu=""> on acpi0 attimer0: <at timer=""> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <at realtime="" clock=""> port 0x70-0x73 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <power button=""> on acpi0 acpi_button1: <sleep button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 vgapci0: <vga-compatible display=""> port 0xff00-0xff07 mem 0xfde80000-0xfdefffff,0xd0000000-0xdfffffff,0xfdf80000-0xfdfbffff irq 16 at device 2.0 on pci0 agp0: <intel 945gme="" svga="" controller=""> on vgapci0 agp0: aperture size is 256M, detected 7932k stolen memory vgapci0: Boot video device vgapci1: <vga-compatible display=""> mem 0xfdf00000-0xfdf7ffff at device 2.1 on pci0 hdac0: <intel 82801g="" hda="" controller=""> mem 0xfdff8000-0xfdffbfff irq 16 at device 27.0 on pci0 pcib1: <acpi pci-pci="" bridge=""> irq 16 at device 28.0 on pci0 pci1: <acpi pci="" bus=""> on pcib1 re0: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0xbe00-0xbeff mem 0xfd7ff000-0xfd7fffff,0xfd4f0000-0xfd4fffff irq 16 at device 0.0 on pci1 re0: Using 1 MSI-X message re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <mii bus=""> on re0 rgephy0: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow pcib2: <acpi pci-pci="" bridge=""> irq 17 at device 28.1 on pci0 pci2: <acpi pci="" bus=""> on pcib2 re1: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0xae00-0xaeff mem 0xfddff000-0xfddfffff,0xfdcf0000-0xfdcfffff irq 17 at device 0.0 on pci2 re1: Using 1 MSI-X message re1: Chip rev. 0x3c000000 re1: MAC rev. 0x00400000 miibus1: <mii bus=""> on re1 rgephy1: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow pcib3: <acpi pci-pci="" bridge=""> irq 18 at device 28.2 on pci0 pci3: <acpi pci="" bus=""> on pcib3 re2: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0xee00-0xeeff mem 0xfdbff000-0xfdbfffff,0xfdaf0000-0xfdafffff irq 18 at device 0.0 on pci3 re2: Using 1 MSI-X message re2: Chip rev. 0x3c000000 re2: MAC rev. 0x00400000 miibus2: <mii bus=""> on re2 rgephy2: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow pcib4: <acpi pci-pci="" bridge=""> irq 19 at device 28.3 on pci0 pci4: <acpi pci="" bus=""> on pcib4 re3: <realtek 8111="" 8168="" b="" c="" cp="" d="" dp="" e="" f="" g="" pcie="" gigabit="" ethernet=""> port 0xde00-0xdeff mem 0xfd9ff000-0xfd9fffff,0xfd8f0000-0xfd8fffff irq 19 at device 0.0 on pci4 re3: Using 1 MSI-X message re3: Chip rev. 0x3c000000 re3: MAC rev. 0x00400000 miibus3: <mii bus=""> on re3 rgephy3: <rtl8169s 8211="" 8110s="" 1000base-t="" media="" interface=""> PHY 1 on miibus3 rgephy3: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow uhci0: <intel 82801g="" (ich7)="" usb="" controller="" usb-a=""> port 0xfe00-0xfe1f irq 23 at device 29.0 on pci0 usbus0 on uhci0 uhci1: <intel 82801g="" (ich7)="" usb="" controller="" usb-b=""> port 0xfd00-0xfd1f irq 19 at device 29.1 on pci0 usbus1 on uhci1 uhci2: <intel 82801g="" (ich7)="" usb="" controller="" usb-c=""> port 0xfc00-0xfc1f irq 18 at device 29.2 on pci0 usbus2 on uhci2 uhci3: <intel 82801g="" (ich7)="" usb="" controller="" usb-d=""> port 0xfb00-0xfb1f irq 16 at device 29.3 on pci0 usbus3 on uhci3 ehci0: <intel 82801gb="" r="" (ich7)="" usb="" 2.0="" controller=""> mem 0xfdfff000-0xfdfff3ff irq 23 at device 29.7 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci0 pcib5: <acpi pci-pci="" bridge=""> at device 30.0 on pci0 pci5: <acpi pci="" bus=""> on pcib5 isab0: <pci-isa bridge=""> at device 31.0 on pci0 isa0: <isa bus=""> on isab0 atapci0: <intel ich7="" udma100="" controller=""> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 31.1 on pci0 ata0: <ata channel=""> at channel 0 on atapci0 atapci1: <intel ich7m="" sata150="" controller=""> port 0xf900-0xf907,0xf800-0xf803,0xf700-0xf707,0xf600-0xf603,0xf500-0xf50f mem 0xfdffe000-0xfdffe3ff irq 19 at device 31.2 on pci0 ata2: <ata channel=""> at channel 0 on atapci1 ata3: <ata channel=""> at channel 1 on atapci1 acpi_tz0: <thermal zone=""> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 pmtimer0 on isa0 orm0: <isa option="" rom=""> at iomem 0xef000-0xeffff pnpid ORM0000 on isa0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: parallel port not found. est0: <enhanced speedstep="" frequency="" control=""> on cpu0 p4tcc0: <cpu frequency="" thermal="" control=""> on cpu0 est1: <enhanced speedstep="" frequency="" control=""> on cpu1 p4tcc1: <cpu frequency="" thermal="" control=""> on cpu1 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. random: unblocking device. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 ugen0.1: <intel> at usbus0 uhub0: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus0 ugen1.1: <intel> at usbus1 uhub1: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus1 ugen3.1: <intel> at usbus3 uhub2: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus3 ugen2.1: <intel> at usbus2 uhub3: <intel 1="" 9="" uhci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus2 ugen4.1: <intel> at usbus4 uhub4: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus4 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered SMP: AP CPU #1 Launched! Timecounter "TSC" frequency 1600090032 Hz quality 1000 Root mount waiting for: usbus4 uhub4: 8 ports with 8 removable, self powered Root mount waiting for: usbus4 ugen4.2: <vendor 0x05e3=""> at usbus4 uhub5: <vendor 2="" 9="" 0x05e3="" usb2.0="" hub,="" class="" 0,="" rev="" 2.00="" 77.64,="" addr=""> on usbus4 Root mount waiting for: usbus4 uhub5: 4 ports with 4 removable, self powered ugen4.3: <generic> at usbus4 umass0: <generic 0="" 3="" mass="" storage="" device,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus4 Root mount waiting for: usbus4 ugen4.4: <vendor 0x04f3=""> at usbus4 ukbd0: <vendor 0="" 4="" 0x04f3="" product="" 0x0103,="" class="" 0,="" rev="" 2.00="" 1.07,="" addr=""> on usbus4 kbd2 at ukbd0 uhid0: <vendor 0="" 4="" 0x04f3="" product="" 0x0103,="" class="" 0,="" rev="" 2.00="" 1.07,="" addr=""> on usbus4 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <multiple card ="" reader="" 1.00=""> Removable Direct Access SCSI-0 device da0: Serial Number 058F63666433 da0: 40.000MB/s transfers da0: 7580MB (15523840 512 byte sectors: 255H 63S/T 966C) da0: quirks=0x2 <no_6_byte>Trying to mount root from ufs:/dev/ufs/pfsense1 [ro,sync,noatime]... WARNING: / was not properly dismounted pflog0: promiscuous mode enabled re0: link state changed to DOWN re0: link state changed to UP ng0: changing name to 'pppoe0' re0: link state changed to DOWN re0: link state changed to UP re3: link state changed to UP ng_pppoe[13]: no matching session ng_pppoe[13]: no matching session ng_pppoe[13]: no matching session ng_pppoe[13]: no matching session ng0: changing name to 'pppoe0' ugen4.5: <ralink> at usbus4 run0: <1.0> on usbus4 run0: MAC/BBP RT2872 (rev 0x0202), RF RT2820 (MIMO 2T2R), address 90:2a:4c:14:33:a3</ralink></no_6_byte></multiple></vendor></vendor></vendor></generic></generic></vendor></vendor></intel></intel></intel></intel></intel></intel></intel></intel></intel></intel></cpu></enhanced></cpu></enhanced></at></keyboard></generic></system></isa></thermal></ata></ata></intel></ata></intel></isa></pci-isa></acpi></acpi></intel></intel></intel></intel></intel></rtl8169s></mii></realtek></acpi></acpi></rtl8169s></mii></realtek></acpi></acpi></rtl8169s></mii></realtek></acpi></acpi></rtl8169s></mii></realtek></acpi></acpi></intel></vga-compatible></intel></vga-compatible></acpi></acpi></sleep></power></at></at></acpi></acpi></intelr></software></software,></version></intelr></lahf></nx></sse3,dtes64,mon,ds_cpl,est,tm2,ssse3,xtpr,pdcm,movbe></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>When I try to configure WiFI and to save settings, pfsense freezes and can not reboot.
Has anyone any ideas on how to make it work? -
If you look through recent posts in this section you will notice problems with RALink's. I tested a RALink module and it worked fine but i notice USB dongles seem troubled. Also no need to add anything to pfSense loader. The RALink driver should catch those automatically. Is your chipset not supported? Mine worked seamlessly just as the Atheros modules do. Not quite as fast…
-
The Chipset (RT2870 https://www.freebsd.org/cgi/man.cgi?query=run%284%29)
is supported and it worked with the pfSense version 2.1.5.
I have now the kernel runfw.ko and if_run.ko from "/boot/kernel/" and the entries
from loader.conf.local removed and tried it again.I have the same problem after reboot. Do I need another kernel?
-
Waste of time.
https://redmine.pfsense.org/issues/4722
-
I have bought Compex WLE200NX mini-PCIe card (Atheros AR9280) and I try it to activate on 3I270D embeded PC, but pfsense will not detect the WiFi card.
Which kernel drivers do I need? -
The drivers for that card are already present.
-
My first though was maybe it is a WWAN slot but i see the BRIK3i270 has a regular slot. Do you see a ath0 in your boot logs?
-
Well my first inkling was right:
http://www.lex.com.tw/products/BRIK2.5-3I270D.html
USB slot for WWAN
