Tcp and udp connection crash randomly after upgrade to 2.2.4
-
i installed pfsense on a nexcom network appliance with 8 "Intel(R) PRO/1000 Network Connection version - 2.4.0" NICs.
pfsense TCP and UDP Connections crash randomly (ssh,http,https,vpns and …)after upgrade to 2.2.4 but there is no any packet lose when i pinging. -
How do you know its crashing, what information/data are you seeing to form this judgement?
-
unfortunately i cant find any log related to this problem but my pfsense loges "lighttpd[65607]: (connections.c.1692) SSL (error): 5 -1 1 Operation not permitted" .
my tcp connections broken and all my web pages hangup (even pfsense management interface) -
OK, so you are using a crystal ball I guess? Good luck… :P
-
@smb3843:
unfortunately i cant find any log related to this problem but my pfsense loges "lighttpd[65607]: (connections.c.1692) SSL (error): 5 -1 1 Operation not permitted" .
my tcp connections broken and all my web pages hangup (even pfsense management interface)Nothing showing up in the logs mentioned here, like /var/crash?
https://doc.pfsense.org/index.php/Obtaining_Panic_Information_for_DevelopersI've posted similar but nothing showed up in the pfsense logs.
https://forum.pfsense.org/index.php?topic=96992.0 -
there is no any log in /var/crash,but when this happen done, my ssh and https connection broken and i got this log in systemlog :
sshd[2003]: fatal: Write failed: Operation not permitted
lighttpd[24810]: (connections.c.1692) SSL (error): 5 -1 1 Operation not permitted -
is the harddrive full or broken ?
-
That's indicative of something killing all states. They don't "crash", they're being deleted by something. Did you enable state killing on gateway failure, and your gateway monitor has loss briefly on occasion? The system log and gateway log would have something in that case.
-
i installed a new SSD hard on my server and "State Killing on Gateway Failure" is disable .
-
MY PROBLEM RESOLVED ;D
with thank to cmb for gave me an idea to resolve this problem.
my "State Killing on Gateway Failure" is unchecked but working ???,i have a gateway that always is offline and monitoring was enabled on it ,i disable monitoring on this gateway and my problem resolved ;D -
The default is checked (disabled), where you had it unchecked it was enabled. That's not the most clear config setting, need to make that description more clear. Glad that took care of it.