10G Card VMWare

bcpereiraa

Hello,

I added a 10G network card. But it will appear this way in pfsense:

This would be a bug pfsense? I can not see via shell as well. in this case the plate is as 1G?

heper

depends what the virtual nic is, you are using … e1000 , vmxnet3 ??

bcpereiraa

@heper:

depends what the virtual nic is, you are using … e1000 , vmxnet3 ??

VmxNet3

cyberbot

@bcpereiraa:

@heper:

depends what the virtual nic is, you are using … e1000 , vmxnet3 ??

VmxNet3

if you mean a Virtual NIC it will always shows auto detect unless you have installed VMWARE tools on your host which are not working now.
but the auto detect is 10GB .

johnpoz

You do not need "vmware" tools to show correct speed and duplex..

The e1000 shows speed an duplex just fine at 1gig. The native vmx3 does not - it just shows autoselect and duplex not reported correctly either. This is why I went back to e1000, so that lldp and cdp via ladvd package.

I just have the open vmware tools.

edit: I would show a screenshot but attachments not working?