VPN through squid proxy not connecting (split tunneling through squid proxy)
Hi all, hope this is the correct section for this, been having a very hard time at this.
I have a non transparent proxy (wpad using squid3 0.2.8) setup and I am using at&t network client to connect to a private network.
When I connect directly (not going through the proxy) everything works as it should (Note: doing this is not a long term solution and a bit of a pain to do every time someone wants to use the vpn).
When I try to go through the proxy and block ports 80 and 443 (NOTE here I setup at&t network client to use the proxy) first it cannot connect, checking the logs I see that it cannot connect to the server, I have tired to just pass the blocked server ips but to test it I unblocked port 80 and 443 and it is then able to connect HOWEVER webpages from the private network do not load or only half load.
I then tried to make pass rules in the wpad to bypass the proxy (had a little success) however the rabbit hole of server ips or domains I need to find seems endless and does not always fix the issue.
Has anyone got any advice for me?
~~ok found a fix
Firewall: Rules LAN FROM~~
IPv4 * LAN NET * * * * none Default allow LAN to any rule IPv6 * LAN NET * * * * none Default allow LAN IPv6 to any rule
IPv4 * * * * * * none Default allow LAN to any rule IPv6 * * * * * * none Default allow LAN IPv6 to any rule
arr, made an update in my wpad which took out the proxy, that's why it worked :(
Ok think i found the issue, it is a split tunnel through squid issue.
Still have not fixed this issue.
Has anyone been able to get split tunnel working through squid?
Could this be an issue with pfsense passing the wpad to the local connection and the vpn connecting?
Because when I do not use a wpad and go direct there is no connection issue.
KOM last edited by
No idea. I've never done what you're doing there.