Pfsense/freebsd ath kernel modules missing
-
Hi all,
I'm relatively new to Pfsense and BSD for that mater but I have been running Linux in various forms for a number of years and I am quite comfortable at moving around the command line to troubleshoot systems.The problem is this;
I have an atheros wifi card it is supported in the latest freebsd build and therefore the latest pfsense.
After numerous attempts back and forward searching internet resources on how to enable the atheros card I have discovered that if_ath is missing from my system;kldstat -v | grep ath 410 uhub/uath 98 pci/ath_pci
ls /boot/kernel alpm.ko fdescfs.ko iicbb.ko ipmi.ko nfsmb.ko smb.ko amdpm.ko glxsb.ko iicbus.ko ipmi_linux.ko opensolaris.ko smbus.ko amdsmb.ko ichsmb.ko iicsmb.ko kernel.gz pcf.ko viapm.ko amdtemp.ko if_ic.ko intpm.ko linker.hints pfsense_kernel.txt zfs.ko coretemp.ko if_stf.ko ipdivert.ko lpbb.ko sfxge.ko dummynet.ko iic.ko ipfw.ko ndis.ko sfxge.ko.symbols
I have also looked for a means to acquire if_ath.ko whether that be by compiling it myself or an official download (I say official but that is in expectation of a kernel module/module source being available from either freebsd or pfsense or atheros/qualcomm) though this has proven difficult to discover.
If someone has a resource that shows how to build/add a kernel module and where i can either get the precompiled .ko or the source it would be appreciated.
Update 1: Managed to find this mailing list post (http://lists.freebsd.org/pipermail/freebsd-wireless/2011-June/000230.html) hope it is relevant. I'll post the results after I get working on it tomorrow. Again if anyone has more pieces of the puzzle please post a link or comment it may help someone else later.
Thanks
-
If it aint' detected, it ain't supported. There's certainly no Atheros support missing anywhere. Get a supported Atheros card model. Or better, get a proper AP.
-
I don't have any Atheros hardware on my pfSense hosts, but this is what I found for the kernel running on my 64-bit 2.2.4 .
kldstat -v | grep ath
93 pci/ath_pci
387 uhub/uathIt appears that PCI and USB support for Atheros is there.
Are you certain that your card is supported? https://wiki.freebsd.org/dev/ath_hal%284%29/HardwareSupport
Have you tried building a FreeBSD 10.1 system of the same type to prove it works?
If you can get the card running under FreeBSD 10.1 and find that a module is missing, copy it across to your pfSense and edit /boot/loader.conf accordingly.
-
There's no need to copy any modules for Atheros. If some WiFi HW has a chance of working with FBSD/pfSense, it's Atheros. Once again - if it ain't detected, you have an unsupported model. Do NOT copy random crap from anywhere, totally pointless.
$ sysctl kern.conftxt | grep ath device ath device ath_pci device ath_hal device ath_rate_sample device uath
-
Sorry to post in here but I beleive I have a similar issue.
I'm trying with no luck to use an Atheros Ar5b95 mini pcie WiFi or Atheros Ar5bxb72 with my PFsense box.
The card was never recognized by OS. Maybe if_ath.ko is missing?
My /boot/loader.conf.local is like above:
kern.cam.boot_delay=10000 legal.intel_ipw.license_ack=1 legal.intel_wpi.license_ack=1 legal.intel_iwi.license_ack=1 if_ath_load="YES" if_ath_pci_load="YES" if_ath_hal_load="YES" hw.ath.debug="1" hw.ath.hal.debug="1"
kldstat output (Should ath.ko be in here?!?):```
Id Refs Address Size Name
1 15 0xffffffff80200000 225f380 kernel
2 1 0xffffffff82611000 7577 aesni.ko
3 1 0xffffffff82619000 29eb coretemp.ko
4 1 0xffffffff8261c000 2a9bf ipfw.ko
5 1 0xffffffff82647000 d299 dummynet.kols /boot/kernel output:
aesni.ko
alpm.ko
amdpm.ko
amdsmb.ko
amdtemp.ko
coretemp.ko
dummynet.ko
fdescfs.ko
glxsb.ko
hwpmc.ko
ichsmb.ko
if_ic.ko
if_ixgbe.ko
if_stf.ko
iic.ko
iicbb.ko
iicbus.ko
iicsmb.ko
intpm.ko
ipdivert.ko
ipfw.ko
ipmi.ko
ipmi_linux.ko
ismt.ko
kernel.gz
linker.hints
lpbb.ko
ndis.ko
nfsmb.ko
nmdm.ko
opensolaris.ko
pcf.ko
sfxge.ko
smb.ko
smbus.ko
viapm.ko
vmm.ko
zfs.kodmesg output:``` Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.3-RELEASE-p19 #1 76a12c4e6(RELENG_2_3_4): Fri Jul 14 15:02:35 CDT 2017 root@ce23-amd64-builder:/builder/pfsense-234/tmp/obj/builder/pfsense-234/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: Intel(R) Core(TM) i7-4790T CPU @ 2.70GHz (2693.82-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>Features2=0x7ffafbff <sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,x2apic,movbe,popcnt,tscdlt,aesni,xsave,osxsave,avx,f16c,rdrand>AMD Features=0x2c100800 <syscall,nx,page1gb,rdtscp,lm>AMD Features2=0x21 <lahf,abm>Structured Extended Features=0x2fbb <fsgsbase,tscadj,bmi1,hle,avx2,smep,bmi2,erms,invpcid,rtm,nfpusg>XSAVE Features=0x1 <xsaveopt>VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 4294967296 (4096 MB) avail memory = 4025741312 (3839 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <alaska a="" m="" i="">FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 2 cpu3 (AP): APIC ID: 3 cpu4 (AP): APIC ID: 4 cpu5 (AP): APIC ID: 5 cpu6 (AP): APIC ID: 6 cpu7 (AP): APIC ID: 7 random: <software, yarrow="">initialized ioapic0 <version 2.0="">irqs 0-23 on motherboard wlan: mac acl policy registered netmap: loaded module kbd1 at kbdmux0 cryptosoft0: <software crypto="">on motherboard padlock0: No ACE support. acpi0: <alaska a="" m="" i="">on motherboard acpi0: Power Button (fixed) cpu0: <acpi cpu="">on acpi0 cpu1: <acpi cpu="">on acpi0 cpu2: <acpi cpu="">on acpi0 cpu3: <acpi cpu="">on acpi0 cpu4: <acpi cpu="">on acpi0 cpu5: <acpi cpu="">on acpi0 cpu6: <acpi cpu="">on acpi0 cpu7: <acpi cpu="">on acpi0 hpet0: <high precision="" event="" timer="">iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <at realtime="" clock="">port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <at timer="">port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus="">on pcib0 pcib1: <acpi pci-pci="" bridge="">irq 16 at device 1.0 on pci0 pci1: <acpi pci="" bus="">on pcib1 igb0: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe060-0xe07f mem 0xf7580000-0xf75fffff,0xf760c000-0xf760ffff irq 16 at device 0.0 on pci1 igb0: Using MSIX interrupts with 9 vectors igb0: Ethernet address: 00:90:27:e1:2d:93 igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: Bound queue 4 to cpu 4 igb0: Bound queue 5 to cpu 5 igb0: Bound queue 6 to cpu 6 igb0: Bound queue 7 to cpu 7 igb0: netmap queues/slots: TX 8/1024, RX 8/1024 igb1: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe040-0xe05f mem 0xf7500000-0xf757ffff,0xf7608000-0xf760bfff irq 17 at device 0.1 on pci1 igb1: Using MSIX interrupts with 9 vectors igb1: Ethernet address: 00:90:27:e1:2d:94 igb1: Bound queue 0 to cpu 0 igb1: Bound queue 1 to cpu 1 igb1: Bound queue 2 to cpu 2 igb1: Bound queue 3 to cpu 3 igb1: Bound queue 4 to cpu 4 igb1: Bound queue 5 to cpu 5 igb1: Bound queue 6 to cpu 6 igb1: Bound queue 7 to cpu 7 igb1: netmap queues/slots: TX 8/1024, RX 8/1024 igb2: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe020-0xe03f mem 0xf7480000-0xf74fffff,0xf7604000-0xf7607fff irq 18 at device 0.2 on pci1 igb2: Using MSIX interrupts with 9 vectors igb2: Ethernet address: 00:90:27:e1:2d:95 igb2: Bound queue 0 to cpu 0 igb2: Bound queue 1 to cpu 1 igb2: Bound queue 2 to cpu 2 igb2: Bound queue 3 to cpu 3 igb2: Bound queue 4 to cpu 4 igb2: Bound queue 5 to cpu 5 igb2: Bound queue 6 to cpu 6 igb2: Bound queue 7 to cpu 7 igb2: netmap queues/slots: TX 8/1024, RX 8/1024 igb3: <intel(r) 1000="" pro="" network="" connection,="" version="" -="" 2.5.3-k="">port 0xe000-0xe01f mem 0xf7400000-0xf747ffff,0xf7600000-0xf7603fff irq 19 at device 0.3 on pci1 igb3: Using MSIX interrupts with 9 vectors igb3: Ethernet address: 00:90:27:e1:2d:96 igb3: Bound queue 0 to cpu 0 igb3: Bound queue 1 to cpu 1 igb3: Bound queue 2 to cpu 2 igb3: Bound queue 3 to cpu 3 igb3: Bound queue 4 to cpu 4 igb3: Bound queue 5 to cpu 5 igb3: Bound queue 6 to cpu 6 igb3: Bound queue 7 to cpu 7 igb3: netmap queues/slots: TX 8/1024, RX 8/1024 vgapci0: <vga-compatible display="">port 0xf000-0xf03f mem 0xf7000000-0xf73fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: <haswell desktop="" gt2="">on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory vgapci0: Boot video device hdac0: <intel haswell="" hda="" controller="">mem 0xf7f10000-0xf7f13fff irq 16 at device 3.0 on pci0 xhci0: <intel lynx="" point="" usb="" 3.0="" controller="">mem 0xf7f00000-0xf7f0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 pci0: <simple comms="">at device 22.0 (no driver attached) ehci0: <intel lynx="" point="" usb="" 2.0="" controller="" usb-b="">mem 0xf7f18000-0xf7f183ff irq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 pcib2: <acpi pci-pci="" bridge="">irq 16 at device 28.0 on pci0 pci2: <acpi pci="" bus="">on pcib2 em0: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xd000-0xd01f mem 0xf7e00000-0xf7e1ffff,0xf7e20000-0xf7e23fff irq 16 at device 0.0 on pci2 em0: Using MSIX interrupts with 3 vectors em0: Ethernet address: 00:90:28:01:2e:f1 em0: netmap queues/slots: TX 1/1024, RX 1/1024 pcib3: <acpi pci-pci="" bridge="">irq 17 at device 28.1 on pci0 pci3: <acpi pci="" bus="">on pcib3 em1: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xc000-0xc01f mem 0xf7d00000-0xf7d1ffff,0xf7d20000-0xf7d23fff irq 17 at device 0.0 on pci3 em1: Using MSIX interrupts with 3 vectors em1: Ethernet address: 00:90:28:01:2e:f2 em1: netmap queues/slots: TX 1/1024, RX 1/1024 pcib4: <acpi pci-pci="" bridge="">irq 18 at device 28.2 on pci0 pci4: <acpi pci="" bus="">on pcib4 em2: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xb000-0xb01f mem 0xf7c00000-0xf7c1ffff,0xf7c20000-0xf7c23fff irq 18 at device 0.0 on pci4 em2: Using MSIX interrupts with 3 vectors em2: Ethernet address: 00:90:28:01:2e:f3 em2: netmap queues/slots: TX 1/1024, RX 1/1024 pcib5: <acpi pci-pci="" bridge="">irq 19 at device 28.3 on pci0 pci5: <acpi pci="" bus="">on pcib5 em3: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0xa000-0xa01f mem 0xf7b00000-0xf7b1ffff,0xf7b20000-0xf7b23fff irq 19 at device 0.0 on pci5 em3: Using MSIX interrupts with 3 vectors em3: Ethernet address: 00:90:28:01:2e:f4 em3: netmap queues/slots: TX 1/1024, RX 1/1024 pcib6: <acpi pci-pci="" bridge="">irq 16 at device 28.4 on pci0 pci6: <acpi pci="" bus="">on pcib6 em4: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x9000-0x901f mem 0xf7a00000-0xf7a1ffff,0xf7a20000-0xf7a23fff irq 16 at device 0.0 on pci6 em4: Using MSIX interrupts with 3 vectors em4: Ethernet address: 00:90:28:01:2e:f5 em4: netmap queues/slots: TX 1/1024, RX 1/1024 pcib7: <acpi pci-pci="" bridge="">irq 17 at device 28.5 on pci0 pci7: <acpi pci="" bus="">on pcib7 em5: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x8000-0x801f mem 0xf7900000-0xf791ffff,0xf7920000-0xf7923fff irq 17 at device 0.0 on pci7 em5: Using MSIX interrupts with 3 vectors em5: Ethernet address: 00:90:28:01:2e:f6 em5: netmap queues/slots: TX 1/1024, RX 1/1024 pcib8: <acpi pci-pci="" bridge="">irq 18 at device 28.6 on pci0 pci8: <acpi pci="" bus="">on pcib8 em6: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x7000-0x701f mem 0xf7800000-0xf781ffff,0xf7820000-0xf7823fff irq 18 at device 0.0 on pci8 em6: Using MSIX interrupts with 3 vectors em6: Ethernet address: 00:90:28:01:2e:f7 em6: netmap queues/slots: TX 1/1024, RX 1/1024 pcib9: <acpi pci-pci="" bridge="">irq 19 at device 28.7 on pci0 pci9: <acpi pci="" bus="">on pcib9 em7: <intel(r) 1000="" pro="" network="" connection="" 7.6.1-k="">port 0x6000-0x601f mem 0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 19 at device 0.0 on pci9 em7: Using MSIX interrupts with 3 vectors em7: Ethernet address: 00:90:28:01:2e:f8 em7: netmap queues/slots: TX 1/1024, RX 1/1024 ehci1: <intel lynx="" point="" usb="" 2.0="" controller="" usb-a="">mem 0xf7f17000-0xf7f173ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 isab0: <pci-isa bridge="">at device 31.0 on pci0 isa0: <isa bus="">on isab0 ahci0: <intel lynx="" point="" ahci="" sata="" controller="">port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7f16000-0xf7f167ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich1: <ahci channel="">at channel 1 on ahci0 ahciem0: <ahci enclosure="" management="" bridge="">on ahci0 acpi_button0: <power button="">on acpi0 acpi_tz0: <thermal zone="">on acpi0 acpi_tz1: <thermal zone="">on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 sc0: <system console="">at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0 atkbd0: <at keyboard="">irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range est0: <enhanced speedstep="" frequency="" control="">on cpu0 est1: <enhanced speedstep="" frequency="" control="">on cpu1 est2: <enhanced speedstep="" frequency="" control="">on cpu2 est3: <enhanced speedstep="" frequency="" control="">on cpu3 est4: <enhanced speedstep="" frequency="" control="">on cpu4 est5: <enhanced speedstep="" frequency="" control="">on cpu5 est6: <enhanced speedstep="" frequency="" control="">on cpu6 est7: <enhanced speedstep="" frequency="" control="">on cpu7 Timecounters tick every 1.000 msec hdacc0: <intel haswell="" hda="" codec="">at cad 0 on hdac0 hdaa0: <intel haswell="" audio="" function="" group="">at nid 1 on hdacc0 pcm0: <intel haswell="" (hdmi="" dp="" 8ch)="">at nid 3 on hdaa0 random: unblocking device. usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 480Mbps High Speed USB v2.0 usbus2: 480Mbps High Speed USB v2.0 ugen2.1: <intel>at usbus2 uhub0: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus2 ugen1.1: <intel>at usbus1 uhub1: <intel 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus1 ugen0.1: <0x8086> at usbus0 uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 21 ports with 21 removable, self powered ugen2.2: <vendor 0x8087="">at usbus2 uhub3: <vendor 2="" 9="" 0x8087="" product="" 0x8000,="" class="" 0,="" rev="" 2.00="" 0.05,="" addr="">on usbus2 ugen1.2: <vendor 0x8087="">at usbus1 uhub4: <vendor 2="" 9="" 0x8087="" product="" 0x8008,="" class="" 0,="" rev="" 2.00="" 0.05,="" addr="">on usbus1 uhub4: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <ahci sgpio="" enclosure="" 1.00="" 0001="">SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich1 bus 0 scbus0 target 0 lun 0 ada0: <intel ssdsc2bw120h6="" rg20="">ACS-3 ATA SATA 3.x device ada0: Serial Number CVTR523204PX120AGN ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada0: quirks=0x1<4K> ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! Timecounter "TSC-low" frequency 1346911190 Hz quality 1000 Trying to mount root from ufs:/dev/ufsid/597c9240b1c6b067 [rw]... WARNING: / was not properly dismounted padlock0: No ACE support. aesni0: <aes-cbc,aes-xts,aes-gcm,aes-icm>on motherboard coretemp0: <cpu on-die="" thermal="" sensors="">on cpu0 coretemp1: <cpu on-die="" thermal="" sensors="">on cpu1 coretemp2: <cpu on-die="" thermal="" sensors="">on cpu2 coretemp3: <cpu on-die="" thermal="" sensors="">on cpu3 coretemp4: <cpu on-die="" thermal="" sensors="">on cpu4 coretemp5: <cpu on-die="" thermal="" sensors="">on cpu5 coretemp6: <cpu on-die="" thermal="" sensors="">on cpu6 coretemp7: <cpu on-die="" thermal="" sensors="">on cpu7 vlan0: changing name to 'em5_vlan5' vlan1: changing name to 'em5_vlan6' vlan2: changing name to 'em5_vlan7' vlan3: changing name to 'em5_vlan9' em5: link state changed to UP em5_vlan5: link state changed to UP em5_vlan6: link state changed to UP em5_vlan7: link state changed to UP em5_vlan9: link state changed to UP em0: link state changed to UP igb0: link state changed to UP bridge0: Ethernet address: 02:47:8c:95:a5:00 bridge0: link state changed to UP em5: promiscuous mode enabled em5_vlan7: promiscuous mode enabled em3: promiscuous mode enabled tun1: changing name to 'ovpns1' ovpns1: link state changed to UP pflog0: promiscuous mode enabled em1: link state changed to UP ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled DUMMYNET 0 with IPv6 initialized (100409) load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded em2: link state changed to UP em6: promiscuous mode enabled em6: link state changed to UP</cpu></cpu></cpu></cpu></cpu></cpu></cpu></cpu></aes-cbc,aes-xts,aes-gcm,aes-icm></intel></ahci></vendor></vendor></vendor></vendor></intel></intel></intel></intel></intel></intel></intel></enhanced></enhanced></enhanced></enhanced></enhanced></enhanced></enhanced></enhanced></at></keyboard></generic></system></thermal></thermal></power></ahci></ahci></intel></isa></pci-isa></intel></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel></simple></intel></intel></haswell></vga-compatible></intel(r)></intel(r)></intel(r)></intel(r)></acpi></acpi></acpi></acpi></at></at></high></acpi></acpi></acpi></acpi></acpi></acpi></acpi></acpi></alaska></software></version></software,></alaska></xsaveopt></fsgsbase,tscadj,bmi1,hle,avx2,smep,bmi2,erms,invpcid,rtm,nfpusg></lahf,abm></syscall,nx,page1gb,rdtscp,lm></sse3,pclmulqdq,dtes64,mon,ds_cpl,vmx,smx,est,tm2,ssse3,sdbg,fma,cx16,xtpr,pdcm,pcid,sse4.1,sse4.2,x2apic,movbe,popcnt,tscdlt,aesni,xsave,osxsave,avx,f16c,rdrand></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,htt,tm,pbe>
pciconf -lv output:
hostb0@pci0:0:0:0: class=0x060000 card=0x0c008086 chip=0x0c008086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '4th Gen Core Processor DRAM Controller' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x0c018086 chip=0x0c018086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller' class = bridge subclass = PCI-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x04128086 chip=0x04128086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller' class = display subclass = VGA hdac0@pci0:0:3:0: class=0x040300 card=0x0c0c8086 chip=0x0c0c8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller' class = multimedia subclass = HDA xhci0@pci0:0:20:0: class=0x0c0330 card=0x8c318086 chip=0x8c318086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB xHCI' class = serial bus subclass = USB none0@pci0:0:22:0: class=0x078000 card=0x8c3a8086 chip=0x8c3a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family MEI Controller' class = simple comms ehci0@pci0:0:26:0: class=0x0c0320 card=0x8c2d8086 chip=0x8c2d8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB EHCI' class = serial bus subclass = USB pcib2@pci0:0:28:0: class=0x060400 card=0x8c108086 chip=0x8c108086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:1: class=0x060400 card=0x8c128086 chip=0x8c128086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:2: class=0x060400 card=0x8c148086 chip=0x8c148086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib5@pci0:0:28:3: class=0x060400 card=0x8c168086 chip=0x8c168086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib6@pci0:0:28:4: class=0x060400 card=0x8c188086 chip=0x8c188086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib7@pci0:0:28:5: class=0x060400 card=0x8c1a8086 chip=0x8c1a8086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib8@pci0:0:28:6: class=0x060400 card=0x8c1c8086 chip=0x8c1c8086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib9@pci0:0:28:7: class=0x060400 card=0x8c1e8086 chip=0x8c1e8086 rev=0xd5 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI ehci1@pci0:0:29:0: class=0x0c0320 card=0x8c268086 chip=0x8c268086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB EHCI' class = serial bus subclass = USB isab0@pci0:0:31:0: class=0x060100 card=0x8c4a8086 chip=0x8c4a8086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = 'H87 Express LPC Controller' class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0x8c028086 chip=0x8c028086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]' class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0x8c228086 chip=0x8c228086 rev=0x05 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family SMBus Controller' class = serial bus subclass = SMBus igb0@pci0:1:0:0: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet igb1@pci0:1:0:1: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet igb2@pci0:1:0:2: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet igb3@pci0:1:0:3: class=0x020000 card=0x00008086 chip=0x150f8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82580 Gigabit Fiber Network Connection' class = network subclass = ethernet em0@pci0:2:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em1@pci0:3:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em2@pci0:4:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em3@pci0:5:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em4@pci0:6:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em5@pci0:7:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em6@pci0:8:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet em7@pci0:9:0:0: class=0x020000 card=0x6c401462 chip=0x10d38086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = '82574L Gigabit Network Connection' class = network subclass = ethernet
kind regards