Is it possible?
-
I should just let dhcp server disabled on my wifi-router or I should not?..
You can do but the WAN IP from the pfSense msut be a static one, that is outside of the
DHCP pool from the DHCP server from the DD-WRT Router!I already enter an static ip address to wan (192.168.1.100)
Then the DHCP IP range should be from 192.168.1.1/24 - 192.168.1.99/24 or
192.168.1.101/24 to 192.168.1.254/24 so that the WAN IP from the pfSense is
not inside of the IP range from the DHCP server from the DD-WRT!I set it bridged adapter
Why? Is the VM also doing NAT?
dd-wrt is a real device, it's the wifi-router that I'm using right now
There comes the Internet in or?
Internet –- ISP --- DD-WRT --- VM host --- VM with pfSense --- LAN
If the DD-WRT is doing NAT and the VM host also and then on top the pfSense will be also doing NAT
you get in trouble here.If the WAN IP Address of the pfSense is inside the DHCP IP Address range you will be also going into trouble.
-
@BlueKobold:
There comes the Internet in or?
Internet –- ISP --- DD-WRT --- VM host --- VM with pfSense --- LAN
If the DD-WRT is doing NAT and the VM host also and then on top the pfSense will be also doing NAT
you get in trouble here.my network setting is: internet > wifi-router > laptop where the virtualbox installed > VM with pfsense
If the WAN IP Address of the pfSense is inside the DHCP IP Address range you will be also going into trouble.
should I set the wan of pfsense to 192.168.1.3 or what?
-
I really don't know if it's nat or not :o
-
what should I do if the external lan card cannot detect?.. should I install latest version of pfsense?.. I changed my setup onto stand-alone
-
FreeBSD Hardware Compatibility List:
https://www.freebsd.org/releases/10.1R/hardware.html
-
I don't need to install their drivers?
-
You're better off just sticking to supported hardware.
-
You're better off just sticking to supported hardware.
Exactly.
Time to promote plan B to Plan A: make pfSEnse work on its own 'device'.
Afterwards, when you 'manage' EXSI well, try to to 'visualize' the whole thing. -
OP wants to learn/is being taught pfSense, hence the virtual setup. Dedicated HW is probably out of that scope.
-
You're better off just sticking to supported hardware.
thank you sir..
quick question, can I watch cached videos using wifi on pfsense without buffering it or this is applicable only on wired? -
That's more up to your Wi-Fi than pfSense. pfSense doesn't care if you're wired or wireless.
-
could someone teach me how to layout properly my network?
I'm doing this: ISP(internet) > (built-in lan) > old pc(with pfsense) > (external lan) > wifi-router(with dd-wrt) > laptop
I set my built-in lan as wan interface and external lan as lan interface
pfsense has blank lan when I start it up… please help me so that I'll be able to browse its gui and to enable the captive portal
-
quick question, can I watch cached videos using wifi on pfsense without buffering it or this is applicable only on wired?
Strange question.
"Videos"that only work when the connection si wired ?
So when there is Wifi (radio) or Optical (fibre) in the path, there are problems ?
Never heard about that one.Better stick to 'normal' devices and setup ;D
-
"Videos"that only work when the connection si wired ?
Perhaps they need the mighty Denon cable? :D ;D :D
-
it is possible that I'll be the one who will assign voucher codes for pfsense?
-
What?
-
I'm the one who will generate the voucher codes not the pfsense
-
Not that I know of. There's crypto involved that has to match up. Why not let pfSense do it? You can generate hundreds if not thousands at a time. Take them, put them in a database, print cards, whatever, and hand them out by whatever means works for you.
-
Our adviser suggested that, so I asked if it's possible… thanks anyway :)
-
I'm planning to install the squid 3, is there any conflict between that and captive portal?.. what other package/s I should install to make my pfsense more useful? TIA
